Center lathe

Mazak

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 142967, turning diameter over cross slide: 300 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 30 m/min, feed rate X-axis: 5 m/min, controller model: Mazatrol PC Fusion CNC 640T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Maximum turning diameter: 300 mm Maximum swing diameter: 525 mm Maximum swing diameter over the slide: 350 mm Maximum bar diameter: 51 mm Main spindle Speed range: 35 – 4,000 rpm Drive power: 15 kW Maximum torque: 350 Nm Spindle nose: A2-6 Spindle bore: 61 mm C-axis positioning: 0–360° / 0.001° Counter spindle Blsdpfx Aszpxgxsm Tjk Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Maximum torque: 57 Nm Indexing: 72 positions / 5° Tool turret Number of tool stations: 12 Equipment: Stationary and driven tools Turret indexing time to station 1: approx. 0.2 s Driven tools Drive power: 3.7 kW Maximum torque: 35 Nm Speed range: 25–4,500 rpm Travel ranges X-axis travel: 190 mm Z-axis travel: 575 mm B-axis travel: 585 mm Rapid traverse rates Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse B-axis: 18 m/min Feed ranges Feed X-/Z-axis: 0–5,000 mm/min Feed C-axis: 1–2,000 rpm MACHINE DETAILS Control system: Mazatrol PC Fusion CNC 640T EQUIPMENT Counter spindle Bar feeder

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore Bledpextbf Ejfx Am Tjk 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Mazak Teaching Box/Teach Pendant 7780003000 – Original Yamazaki Mazak For sale is an original Mazak Teaching Box / Teach Pendant, part number 7780003000 (B-02), from Yamazaki Mazak Corporation. The handheld unit is in fully functional condition and operates perfectly. Cosmetically, it shows only the usual signs of wear and tear consistent with age and use (see photos). Technical Specifications Manufacturer: Yamazaki Mazak Corporation Part Number: 7780003000 Original Mazak spare part Made in Japan Condition Blsdpfszrpx Rjx Am Tok Used Technically sound and fully functional Display, buttons, and emergency stop function correctly Normal signs of use on the housing and cable (see images) Scope of Delivery 1 × Mazak Teaching Box 7780003000 Connection cable Delivered as shown

Condition: good (used), Year of construction: 1989, Parts shown by hand not come. Bodpfszrm Nyjx Am Tslk

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 100 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 400 mm, turning length: 2,000 mm, quill travel distance: 230 mm, total length: 3,600 mm, total width: 1,250 mm, total height: 1,400 mm, spindle speed (max.): 1,400 rpm, metric thread steps: 120, overall weight: 3,100 kg, three-jaw chuck diameter: 315 mm, Used traditional parallel lathe Sibimex CU500MT in excellent condition, ideal for mechanical workshops, industrial maintenance, metal fabrication, and precision machining. Solid, reliable machine, always carefully maintained. Sturdy cast iron frame, smooth slides, and precise mechanics. Perfect for those looking for a ready-to-use solution without investing in a new machine. Key features: * Excellent overall condition * Precise and reliable mechanics * Ready for immediate use * Ideal for machining shafts, flanges, bushings, and single parts * Perfect for small to medium production or maintenance Machine is operational and can be inspected by appointment. No urgent work required. Testing on site available. Bledpfx Aoym Ut Dsm Tek

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours- Automatic Machining Time: 5,877 hours - Operating Time / Power On Time: 26,902 hours- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Bedpfoy T Hbzjx Am Tjlk Technical Specification Through-spindle Coolant Yes

Condition: used, MAZAK QTN 100II MSY, manufactured in JAPAN, year 2009 Max. turning diameter: 280 mm Spindle max. speed: 6000 rpm Two Hainbuch collet chucks mounted on the spindle Spindle bore: 45 mm 12-station turret Counter spindle max. speed: 6000 rpm Tool probe Part catcher Bar feeder interface Axis travels: Bjdpfx Aozrkztjm Telk X: 185 mm Y: 100 (+/- 50) mm Z: 455 mm W: 460 mm Included with the machine: - 8 standard tool holders - 4 powered tool holders (2/2) - Documentation - Chip conveyor

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t Bljdpfeu Iwyiex Am Tsk space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: used, Year of construction: 2010, The machine is powered and can be inspected. Blsdpfxewk Hwqj Am Tok Max. machining diameter: 280 mm Max. machining length: 409 mm Bar capacity (main spindle): 52 mm Main spindle: Chuck size: 6 inches Max. speed: 6,000 rpm Motor power: 15 kW (40% duty cycle), 11 kW (continuous operation) Max. torque: 184 Nm Counter spindle: Chuck size: 5 inches Max. speed: 6,000 rpm Motor power: 11 kW (25% duty cycle), 7.5 kW (continuous operation) Max. torque: 90 Nm Tool turret: Number of stations: 12 Max. speed of driven tools: 5,000 rpm Motor power (milling spindle): 5.5 kW (40% duty cycle), 3.7 kW (Continuous operation) Max. torque (milling spindle): 47 Nm Travel ranges: X-axis: 187 mm Y-axis: 100 mm Z-axis: 510 mm W-axis (counter spindle): 460 mm Rapid traverse speeds: X/Z-axis: 33 m/min Y-axis: 21 m/min W-axis: 30 m/min CNC control: MAZATROL SmoothG Machine weight: approx. 3,600–4,720 kg (depending on model) Dimensions (L × W × H): approx. 2,400 × 1,800 × 2,000 mm Special features Multi-tasking capability: Turning, milling, Y-axis, and counter spindle enable complex machining operations in one Clamping. Integrated motor spindles: Both the main and counter spindles feature integrated motors that minimize vibration and ensure high machining accuracy. Y-axis machining: Enables the machining of complex workpieces with high precision.

Condition: used, Year of construction: 2009, Technical details: Bodpfxozq S Dyj Am Tjlk turning diameter: 380 mm turning length: 538 mm total power requirement: 26 kW weight of the machine ca.: 5,2 t

Condition: excellent (used), functionality: fully functional, spindle bore: 652 mm, Pinacho L1 lathe, model 225 x 1600mm swing, maximum diameter over bed 450mm, over cross slide 690mm, over compound slide 215mm, spindle bore 52mm, 18 speeds 32-1800 rpm, 5.5 hp motor, with steady rest, with quick-change tool post, with various accessories, lathe in good condition. Bljdpfxjzbzzwo Am Tsk

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MY Max. turning diameter: 380 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar capacity: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher - interface for bar feeder - signal light (3-color LED) Bledpfxsyki Tae Am Tsk - reinforced coolant pump - chip conveyor - standard MAZAK tool package

Condition: defective spare-parts repository (used), Year of construction: 1986, functionality: not functional, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, Sale from Bremen location Manufacturer Mazak Power Center SV-12 with Mazatrol CAM M – 2, with tool changer for 30 tools, with grooved clamping table and other accessories The machine is defective and is explicitly sold as a source of spare parts. The exact defect is the absence of the control board. However, many components are still complete and can be used as spare parts. A test run is not possible. Year of manufacture 1986 Technical data Travel distances X/Z-axis approx. 1250 mm, Y-axis approx. 550 mm Control system Mazatrol Cam M-2 Table size 1300 x 500 mm Max. table load approx. 800 kg Travel distance X-axis 1250 mm Travel distance Y-axis 550 mm Travel distance Z-axis 550 mm Spindle mount BT 40 / SK 40 Spindle speed max. 400 – 6000 rpm Tool changer 30 tools Drive power 11 kW Weight 7000 kg Bledpfx Amjzq H A De Tek L x W x H 360 x 300 x 295 cm

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Bedpfxoytyf Se Am Tslk Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1990, functionality: unexamined, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, For sale from our Bremen location. Manufacturer: Model: AJV25/404 Mazak with 2 worktables and 3 machine vices, as well as accessories, including 1 T-slot worktable, 1 additional machine vice, 1 chip conveyor, and 1 tool changer, with 30 tools. Year of manufacture: 1990 Technical data: X-axis travel: 1000 mm Y-axis travel: 508 mm Z-axis travel: 460 mm Blsdpfx Aozq Hw Ujm Tsk Rapid traverse rate: X/Y-axis: 24 m/min Z-axis: 18 m/min Control system: Mazatrol M-32 Table length (clamping surface): 550 x 1240 mm Table width: 410 mm Workpiece weight: 300 kg Tool changer: 40 Spindle taper: CAT 40 Max. working spindle torque: 263 Nm Max. spindle speed: 28 – 4000 rpm Spindle motor power: 15 kW Length x Width x Height: 5400.0 x 2900.0 x 3000.0 Weight: 8600 kg