CNC turning and milling centre

Mazak Super Quickturn 200

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Hodpfx Aaox Atyaedsnh Tool cabinet and cutting tools not come. Only tool holders will come.

Condition: used, Year of construction: 2004, MAZAK QUICK TURN NEXUS 200-M CNC LATHE Mazak Quick Turn Nexus 200 M CNC lathe with Mazatrol Nexus 640T control, a new 8” power chuck with big bore to take 80mm, tool setter, parts catcher, swarf conveyor, suit of tool holders, collet chuck and barfeed interface * Note: Photographed on arrival…awaits cleaning & prep. Specification: Hnodpfewx Nl Hjx Aadeh Maximum Swing 675 mm / 26.57 in Maximum Machining Diameter 380 mm / 14.960 in Maximum Bar Work Capacity 65 mm / 2.6 in Maximum Machining Length 541 mm / 21.300 in Main Spindle Chuck Size 8 in -with big bore Maximum Speed 5000 rpm Motor Output (30-minute rating) 19 kw / 25.0 hp Turret (Upper) Number of Tools 12 Maximum Speed 4500 rpm Motor Output (5-minute rating) 6 kw / 7.5 hp Feed Axes Travel (X Axis) 230 mm / 9.06 in Travel (Z Axis) 575 mm / 22.64 in

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm Hnodotzdyzepfx Aadjh threading length 3000 mm thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm Hnsdjhzbipepfx Aadsh - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Hodew Au H Ropfx Aadonh Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Hnedstz H T Dspfx Aadeh

Condition: excellent (used), Year of construction: 2008, The condition of the machine is excellent, it has performed only 14078 operations. CNC controlled machine, designed for processing welded frames. Multiple use of the same time He works in a welding and cleaning line It does not take up additional space in the hall It can work in the line of frames, sashes or mixed All operations are performed during cooling: dehydration vents, grooves venting, holes in colored profiles drilling the frame for the post connector drilling holes for the hinge in door frames (x6) drilling holes for the hinge in the leaf (x2) Hodpfxem Ak R Ue Aadsnh The center has its own transport of frames from the welder to the cleaner PLC control, NC User-friendly visualization

Condition: used, Year of construction: 2005, Mazak QTN 200 lathe, year of manufacture 2005 Mazatrol 640T 210 mm Kitagawa BB 208 chuck Hjdpfxjxgpqpe Aadsnh Spindle bore 65 mm Turning length 500 mm Turning diameter 380 mm Tailstock Tool probe

Condition: used, functionality: fully functional, The SMF COMBI 400 is an automatic blow molder designed for the efficient and high quality production of PET bottles. This machine combines advanced technologies to offer continuous, accurate operation with minimal manual intervention, ideal for bottling plants requiring flexibility and performance. ADVANTAGES OF HS AND COMBI SERIES: • Low energy consumption • Modular construction • Silent work • Space saving, compact design • Easy change- overo f bottle size and types of neckrings • Advanced PLC control system with user friendly interface Hsdpswny Eiefx Aadenh • Built-in memory of the PLC saves parameter sets required to produce different bottle sizes. • Pyrometric temperature measurement – Power Wizard KEY BENEFITS • Proven system working in hard environmental conditions • Powerful heading unit with precise controller and convenient adjusting mechanism • Minimum transfer space for the air distribution system • Simple, robust and durable operation MAIN PARAMETERS Blowing air quantity (25 BAR): 3.46 m3/h Mold material: FORTAL

Condition: excellent (used), Year of construction: 2000, Siemens control unit Bar passage 32 mm 2 x 12-position turrets with driven tools Main / counter spindle Y-axis turret top Parts lifting device Hodewh U Edepfx Aadonh Chip conveyor IRCO bar loading magazine