Milling machining centers - universal

MAZAK Variaxis 630-5X II T

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function Ijdox Db D Aspfx Addsht Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. working height: 500 mm Number of tool changer positions: 120 Tool holder: HSK 63T Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Workpiece swing diameter: 730 mm Accessories: - Chip conveyor and tank - Through-spindle coolant (IKZ) - Showa oil mist extraction system - Renishaw probe The machine is in very good condition and can be inspected under power at its current location.

Condition: like new (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 61373, IT IS IN WORKING CONDITION Ihedpfx Adsvwlf Isdot

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Ihedpfxovivx Nj Addjt Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: used, Year of construction: 2021, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2021 Control : Heidenhain TNC 640 Speed : 4000 rpm Movement X/Y/Z : 3500/1200/1500 mm Ihedpfx Adoxv Nknodot In General: Year of manufacture:2021 Control system:TNC 640 Traverse paths X/Y/Z:3,500/1,200/1,500 mm Gear spindle:4,000 rpm, SK 50 Milling head: Technology:Diagonal head with geared spindle Speed:4,000 rpm Power max.:37 kW Torque max.:644 Nm Index:2.5° Work table: Clamping surface:3,700 x 1,000 mm Load capacity max.:9.000 kg Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 Tool diameter max.:125 (250) mm Tool length max.:400 mm Equipment: Position measuring systems:Directly in all axes Chip disposal:Chip conveyor Coolant supply:IKZ system, 20 bar Touch Probe:Renishaw Set-up mode:Electronic handwheel Software option:Adaptive Control

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. Ihjdpfx Adjxcp Srsdjt The machine can be viewed and tested under power at any time. Very well-maintained condition.

Year of construction: 1990, condition: good (used), machine/vehicle number: 92041, table mounting size: 410 x 900 mm Ihsdpfx Adedhhprjdet movements x/y/z: 560/410/380 mm spindle taper: SK 40 spindle turning speed range: 22 - 6000 rpm carriages: x/z until 10000, y until 240 mm/min space needed: 2600 x 2000 x 2300 mm weight: 3500 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, extensive equipment! Very low spindle hours! Technical data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45° / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine pockets: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid feed X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Accessories: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel Iodjx Hx Rhjpfx Addjht - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction system - Tool blow-off device - Blowing air at the spindle carriage - Blowing air through the spindle center - Internal coolant supply 18–70 bar - Paper band filtration system - Chip conveyor - Spindle oil cooler Machine dimensions L x W x H: 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg An inspection/test under power onsite is of course possible. We are not your average machine dealer – here, you will be advised by a CNC expert! We are happy to offer you transport, installation and setup, as well as commissioning and a machine training session, all performed by our own technicians. Everything from one source: Baumgärtner CNC GmbH & Co.KG is a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: used, Year of construction: 2016, CNC MATRIX 2, table 3500 x 800 mm, travels 3000 x 800 x 720 mm, spindle speed 18,000 rpm, 48-tool magazine, through-spindle coolant, central divider for pendulum operation, SANKYO DS50C-R1-2 rotary table, 5 simultaneous axes, chip conveyor. Ihsdpexyzhajfx Addet

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Turning length: 3,000 mm Ihsdpfx Adjxpfd Dedet Swing diameter over cross slide: 520 mm X-axis travel: 600 mm Y-axis travel: 150 mm Z-axis travel: 3,150 mm Swing diameter: 520 mm Turning length: 3,000 mm Control: SIN 840 D Siemens Z-axis: 3,150 mm Z-axis feed rate: 1 – 40,000 mm/min Rapid traverse Z-axis: 40.00 m/min X-axis: 600 mm X-axis feed rate: 1 – 30,000 mm/min Rapid traverse X-axis: 30.00 m/min Main spindle S1 Spindle speed range: 1 – 3,300 rpm Drive power at 100% load: 29.00 kW Spindle nose DIN 55026 – size A11 Spindle diameter at front bearing: 160 mm Spindle bore: 115 mm C-axis: 360 x 0.001° Milling spindle S2 Tool holder: Capto C6 Infinitely variable speed range: 1 – 6,000 rpm Y-axis: -100 / +150 mm B-axis: -110 / +110° Tool magazine with 100 stations Total power requirement: 145 kW Machine weight approx.: 24 t

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Spindle passage: 80 mm Turning length max: 750mm Turning diameter: 340mm Power: 22kw Number of tool holders: 12 Shaft diameter: 40 Powered tools in all positions X axis Z axis C axis Automatic tailstock chip conveyor Isdpfxjh Dzqls Addjht