Vertical machining center

Mazak VTC 300C II

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 3300 Measurements depth 4150 mm Measurements height 3100 mm Control Unit Model Fusion 640 M SK-40 Main Drive Spindle speed range 12000 rpm Movement X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 840 mm Knjdpjx D Eq Tsfx Ah Usf Tools Slots in storage 30 Media Chip conveyor Yes Additional Equipment Renishaw probe This 3-axis Mazak VTC 300C II was manufactured in 2002. It features a Fusion 640 M control, a spindle speed of 12000 rpm, and a tool magazine with 30 places. The machine dimensions are 4150mm in length, 3300mm in width, and 3100mm in height. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 300C II machine we have for sale. Contact us for further details regarding this machine. Application Types Milling

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Knedpotyyn Hjfx Ah Usf

Condition: excellent (used), Year of construction: 2007, Mazak 3-axis vertical machining center in very good condition. Including: 15 bar Cooling through spindle Chip conveyor Renishaw OMP60 measuring probe Knodpfox Eb Evex Ah Uef Only 6911 spindle hours and well maintained. Machine can be inspected under power upon appointment. Availability: February 2026 More info and videos available on request. Control Mazatrol Fusion 640M Max spindle speed 12000 rpm X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Tool holder SK40 Capacity tool magazine 30 positions Table length 2000 mm Table width 760 mm Table load 1400 kg Machine weight 11500 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 760 mm, table length: 2,000 mm, table load: 1,400 kg, IKZ 15 BAar Measuring probe MP12 Bohrzyklus with torq depending Performance package Pendel screen Interface set X - Travel: 1740mm Y - Travel: 760mm Z - Travel: 660mm Table Length: 2000mm Table Width: 760mm Table load: 1400 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Kedpfx Ahjw Rntrs Usnf Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 4450mm Width: 3460mm Height: 2900mm Weight: 10500kg

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Knsdpfx Asd Spf Reh Uef Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm Knodpewyblzofx Ah Ujf 10000 rpm Parts shown by hand not come.

Year of construction: 2014, condition: excellent (used), CNC FUSION 640 M,Table 2000 x 760 mm,Strokes 1740 x 760x 660 mm,spindle speed 12.000 rpm,center coolant 15 bars,magazine 30 tools,4 th Axis KITAGAWA MR 250,Package performance,electronic crank,conveyor belt Knedpfxok Sfwfj Ah Ujf

Condition: reconditioned (used), Year of construction: 2008, CNC Vertical Machining Center HERMLE C 50 U With Heidenhain iTNC 530 path control system Year of manufacture: 2008 Travel paths: X 1000 / Y 1100 / Z 750 mm Speed range: 20 – 18,000 rpm, stepless (HSK 63) Including the following accessories: • NC rotary/swivel table Ø 1150 mm x 900 mm • Vertical tool changer with 60 magazine places (HSK 63) • Blowing air through spindle center • Air blow-off unit • High-pressure coolant system, 80 bar, with paper band filter • Scraper belt conveyor • Coolant system • Sealing air for scales, bed flushing • Oil mist extraction unit • Manual cabin door, automatic cabin roof • Electronic thermal compensation iTNC 530 • Electronic hand control module HR 410 • 3D touch probe by Heidenhain Knsdpfsx Hg Twox Ah Uof • Various HSK 63 tool holders loaded with tools • Rotating clear view window • Chip rinsing gun • 4 height-adjustable machine feet • Operating manuals

Condition: ready for operation (used), Year of construction: 2003, operating hours: 40,593 h, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol Fusion 640T, rotational speed (max.): 12,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm X-axis feed: 36,000 mm/min Control: Mazatrol Fusion 640T Table Table length: 2,000 mm Table width: 760 mm Table load: 1,400 kg Spindle Tool holder: 40 ISO/BT/MK Speed: 12,000 rpm Knedpfxsv I Samj Ah Usf MACHINE DETAILS Length: 4,450 mm Width: 3,460 mm Height: 3,100 mm Weight: 11,500 kg Operating hours: 40,593 h EQUIPMENT - 2 large front doors - Chip conveyor with internal cooling

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible Kedpfou Atmusx Ah Uonf To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location