Machining Center - Vert.

MAZAK VTC800/30SLR

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Gjdpfxsxcgtgo Ab Ujkf Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, Gkedpfx Abovz A Rij Ujf coolant, Interlocked guards.

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD Gkodpfxjwla Hze Ab Uof LONGITUDINAL TRAVEL: 3500 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 40 m/min TABLE SIZE: 3800 x 1000 mm HEAD: A/B AXIS AUTOMATIC ; MILLESIMAL POSITIONING ; ISO 50 ; 5000 rpm; 34 kW TOOL MAGAZINE: CHAIN-TYPE ; 40 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar WEIGHT: 35020 Kg OVERALL DIMENSIONS: 8760 x 4950 x 3780 mm ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW FLOOR TYPE MILLING MACHINE Control and Motors: Two HEIDENHAIN TNC 640 digital CNC controls – one at the machine’s front, one at the rear in the cabin Gedpovrv Susfx Ab Uokf HEIDENHAIN package (motors, measuring systems and portable handwheel) Additional equipment: Tool changer with double gripper, 60 stations Double hinge-belt chip conveyor (longitudinal), one in front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Coordinate measuring machine Mitutoyo EURO M 574 in excellent condition for sale. without computer and software year of manufacture: 1998 without PC!!! X - axis 500 mm Y - axis 700mm Z - axis 400 mm resolution: 0.0005 mm Gkedpfxeu E Uzxo Ab Usf Measuring table material Granite Renishaw MH 20i probe head, Granite bed size 850 mm x 1160 mm, length standard: high-precision linear encoder centering microscope: mitutoyo CF-10 fixing and fine adjustment: one-touch air clamp for each axis continuous fine adjustment throughout the entire stroke range of each axis. effective size: 680x1160 workpiece clamping method: threaded insert M8X1.25 workpiece: Dimensions between columns 720 mm, maximum height: 480 mm maximum weight: 160 kg without PC Length measurement uncertainty ISO 10360 E = [3.5 + 4.0L/1000] µm in the temperature range of 18 ... 22 °C machine weight: 450/540kg

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Travel paths • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 30,000 mm/min Gkedpov Dhw Tsfx Ab Ujf • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: new, Year of construction: 2025, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Gkjdpfxsh Sptno Ab Uef Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, table length: 8,000 mm, table width: 2,500 mm, table load: 15,000 kg, Chain ATC Tool changer 80 positions Rotary table 1500 x 1500 with V-Axis 1500 mm Table load 15.000 Kg Optional Box table 3500 x 1000 x 1000 mm Under power X-Axis: 8000mm Y-Axis: 3100mm Z-Axis: 1600mm Table Length: 8000mm Table Width: 2500mm Table load: 15000 Power on spindle: 43kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Gkedpfjxm Sudsx Ab Ujf Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Control: iTNC530 Millinghead auto-index:2.5 x 2.5° Length: 14000mm Width: 6000mm Height: 6000mm Weight: 68000kg

Condition: good (used), Year of construction: 2021, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, We offer you: Godsx Ekt Espfx Ab Ujkf Universal CNC Machining Center Manufacturer: DMG MORI Model: DMU 95 monoBlock Year of manufacture: 2021 Control: Celos with Siemens 840D sl Operate Travels: - X-axis travel: 950 mm - Y-axis travel: 850 mm - Z-axis travel: 650 mm - C-axis: 360° - A-axis: +/- 120° Main spindle: - Speed: 20,000 rpm - Drive power (40/100%): 25 / 35 kW - Torque: 130 / 86 Nm - Tool holder: HSK-63A Worktable: - Fixed table with integrated rotary table - Table diameter: C-axis 850 x 750 mm integrated in fixed table 1,000 mm x 750 mm - Max. table load: 1,000 kg - Max. workpiece dimensions: Ø 1,040 mm (clampable) / Ø 850 mm (machinable), height 590 mm Tool changer: - Number of tool positions: 60 - Tool change time (chip-to-chip): 5.9 s - Max. tool diameter: 80 / 160 mm - Max. tool length: 420 mm - Max. tool weight: 8 kg Rapid traverse: - Rapid traverse speed (X/Y/Z): 40 m/min - Max. feed speed (X/Y/Z): 40,000 mm/min - Power-on hours: approx. 25,300 h - Operating hours: approx. 7,200 h Technical features and accessories: - Double-gripper tool changer - MPC – Machine Protection Control - Economic Production Package (GER / EU) - Production package: Scraper flight conveyor with coolant system 600 l / 160 gallons Paper band filter Internal coolant supply, 40 bar / 23 l/min, through the spindle center (AD) External coolant supply, 4 bar – 40 l/min (theoretical pump capacity) Chip flushing in the cabinet door (no standard coolant tank) - Spray gun for chip cleaning - Air blast cooling through the spindle center, selectable via M function - Chip flushing in the cabin door: 1.5 bar / 60 l/min (theoretical pump capacity, recommended for high chip volumes) - Coolant ring nozzle for the vertical head: 16 water jets, 7 air jets - Mechanical and electrical interface for oil and emulsion mist extractor - Infrared probe, type Renishaw PP60 optical (OMP 60) - Tool measurement in the work area, Blum Laser DIGILOG - 3D quickSET preparation - SGS – Spindle Growth Sensor - Increased accuracy - Electronic handwheel - ATC (Application Tuning Cycle), programmable feed parameter selection for the machining process: accuracy / surface quality / speed - DECKEL MAHO MDynamics package - IoTconnector - Machine Data Connector (MDC) - NETservice - SERVICEcamera - 3D data model in STEP format for integration into CAD systems The clamping devices shown are not included in the scope of delivery. Accessories and depicted tools are only included if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Condition: good (used), Automatic drawer warehouse is the ideal system for the vertical storage of steel bars and profiles with lengths of 3 m, 6 m and 12 m, heavy accessories, semi-finished products, components, molds and long material in general. The capacity per load unit ranges from a minimum of 5000 kg to a maximum of 6000 kg. Gksdovvlntopfx Ab Uef