Gas cuttingmachines (gas + plasma)

MicroStep DS automatic process line

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm Gedpfx Asf Ncadsdbsip 2x machine cutting torch with cutting table

Condition: good (used), Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel torches (propane) Gisdpju U Hm Ajfx Adbsp Beuting oscillating conveyor table Donaldson DFPRO12 filtration system for outdoor installation 25226ä

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs. Gisdpfstp Dhpsx Adbsp  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: new, Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution. The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles). The design of the machine has been optimized over the years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Main features -attractive price of a very well equipped basic version -Highly dynamic and precise cutting of 2D applications, tubes and profiles -cutting capacity from 0,5mm to 100mm material thickness -Comprehensive database with predefined cutting parameters -Possibility to optionally extend the length of the working area Technical data Drive Servo AC Available working widths 1.500, 2.000, 2.500, 3.000 mm Available working length Any length from 1.500 mm positioning speed 25,000 mm/min Gsdpfx Adof Alb Aoboip cutting thickness up to 100 mm Cutting quality DIN-EN ISO 9013 Positioning accuracy DIN-EN 28206 Repeat accuracy DIN-EN 28206 Electrical systems DIN-EN 81346 Safety module DIN-EN 13850 Working height 740-760 mm Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Gisdpfeu Dw I Esx Adbsp Full description Is attached as a document. Year of construction: 2019 With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of Manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning/cutting table with sectional extraction, 6,000 x 3,000 mm Plasma rotator 'MasterCut' with fully automatic support ACTG automatic calibration unit for the beveling head Kemper extraction system 8000 (year: 10/2015) Asper Basic 2D programming software + Asper BevelCut bevel cutting programming Other technical data: MicroStep machine control system with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical probing iMSNC module assistant for loading CNC programs LCD control unit on the gantry Laser pointer with automatic offset transfer Giedpsxu U Ddsfx Adbop USB 3.0 connectivity for storage devices MicroStep RemoteDiagnostics remote maintenance module Grate cover in the cutting table Reinforced version of the cutting table Connection of the fine plasma source to CNC control Automatic gas console control Electric and mechanical torch height sensing LED signal column on the gantry bridge (2 colors) Tactile safety shut-off device for guide rails Light curtain safety system (collision protection) on the gantry bridge via emergency stop Smart Z Movement ACTG calibration report Fully automatic oxy-fuel support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection 25226ä

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Giedpfxoxnmbns Adbsp Year of manufacture: 2019 CNC control Working area: 2 x 4 m "MasterCut" plasma rotator with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filtration system No. 25226

Condition: like new (used), Year of construction: 2017, functionality: fully functional, For Sale. Ficep Tipo G25LG. Gedpfx Adeu Dxbtebjip Full description Is attached as a document. Year built: 2017 With this line, the input and output is the following length: Input: 6M Output: 3M If you want more pictures or information please contact us.

Condition: good (used), Year of construction: 2018, Burning-Drilling System Sheet Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of Manufacture: 2018 CNC Control Power Source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic turret Tool holder: 14 positions Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing: 5 to 40 mm Sheet size min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum finished part size: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero position cross feeder Number of wagons: 2 clamps NC feed wagon, side-mounted 4 clamping jaws (2+2) 3 short stroke cross feeders Working height: 1,000 mm Discharge side: Discharge roller conveyor with lowerable unload table and chute into material collection container for unloading small parts. Filter unit incl. piping High performance for the use of carbide tools. Gijdpsvzrczefx Adbjp For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and scribing LANTEK license ID: 25226 Availability: immediately!

Condition: good (used), Year of construction: 2016, Used plasma cutting machines from Soitaab (Italy) Model: Plasmatech 3015 Gedpfx Aewx I Nqodboip Table dimensions: 3000 x 1500 mm Hypertherm HPR 130 XD plasma source Marking pen Torit extraction system Year of manufacture: 2016