Used Alko for sale (69)

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Ppjdpfx Amjfzbqye Tsw Weight net 1,040 kg

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. Pjdpfxjwv T R Uj Am Tspw The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Year of construction: 2005, condition: used, Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again. Additional title: Workshop dust extraction Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h Power: 2.2 kW Current: 5 A Voltage: 400 V Ppsdpfx Aozgczhom Tjw Frequency: 50 Hz Base construction: on a mobile frame Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR)

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Podox Edmpspfx Am Tepw Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg Podpfx Amehby Rij Tjpw

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2433380060, overall weight: 176 kg, nominal power: 0.75 kW (1.02 HP), rotational speed (max.): 950 rpm, protection type (IP code): IP54, The devices in the COLOUR JET series are optimally designed for extracting paint mist and solvents at wet painting workstations. The front guide plate ensures that the mist is captured from below and at the side inlets, as solvents from paints settle and collect near the floor. At the same time, the guide plate enables uniform air distribution over the filter and protects the filter medium from direct exposure. Paint pigments are separated by the large-area replaceable filter, and the cleaned exhaust air is then discharged to the outside via a pipe or hose. Dimensions (W x D x H) in mm: 1,012 x 1,405 x 943 Ppjdjzkgwnjpfx Am Tow

Condition: ready for operation (used), Width 70 cm Length 160 cm Height 220 cm Motor 2.2 kW Pedpeygxdgjfx Am Tjpw

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) Ppodpfx Amjfydzbs Tsw • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: as good as new (ex-display), Clean air filter Ppsdpfxshfmpxe Am Tow Type: Power Unit 250 P FU Offer type: Demonstration machine Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 250 mm Nominal volume flow: 3,534 m3/h Maximum volume flow: 4,900 m3/h Negative pressure at Vnenn: 3,184 Pa Filter area: 22.4 m2 Compressed air cleaning including integrated pre-separator including integrated extinguishing system including inverter for speed control including integrated sound insulation shroud (-4 dB(A)) Chip collection volume: 2 x 250 l Sound pressure level: 71 dB(A) including dust baffle Dimensions L x W x H = 3000 x 1058 x 2361 mm Weight 850 kg

Year of construction: 2021, condition: like new (used), machine/vehicle number: 021032-01610, MTA air cleaner Manufacturer: AL-KO Type: Airsafe 1600 Professional air cleaner for large rooms (conference rooms, school classes, etc.) from 48 to 182 m2, air volume infinitely variable, with pre-filter and main filter (particulate matter filter) HEPA 13, control unit and filter change indicator. 1x replacement filter Stepless control LOW MID HIGH Air filtration in m3/h 800 1300 1600 Recommended room size* in m2 48 – 96 79 – 158 91 – 182 Sound pressure level in dB[A] 35 45 50 Power consumption in watts 31 116 191 Podpfxoim Ruro Am Tjpw Electrical connection: 230V/ 50Hz alternating current * Recommendation 3 to 6 times the hourly air filtration rate at a room height of 2.75 m Measured in a 9 x 10 x 2.75 m room, average room absorption, corner installation Dimensions (W / D / H): 661 x 573 x 1900 in mm Weight: 128kg Serial No.: 021032-01610 Year of construction 2021 Condition: optically 1-2, technically OK second hand Used machines can have optical defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Germany GmbH, 41334 Nettetal

Condition: used, Dimensions (L/W/H) 1400/2000 x1400 x3000 mm Dimensions (L/W/H) 1400/2000 x1400 x3000 mm 2x 220/1x 180 mm with 14 suction nozzlespneum. slide controlfan dischargevacuum system in compact designwith 12 built-in automatic slide valvesused, good conditionmake ALKOtype FU-2-12-800-70-III-Ano. 910225length 1400 / 2000 mmwidth 1400 mmheight 3000 mm12 x air intake D 180 with slide2 x air intake D 220 without slidecladdingshaking downwith discharge via fancompl. controlair return recirculation exhaust air D approx. 500 mmwith fan 2 pieceseach 0,9 3,0 kW - pole-changing motor1450 / 2800 rage location 97447 Gerolzhofendelivery as-is, free-loadedwithout guarantee and warranty Ppodpfjvwfu Ajx Am Tjw

Year of construction: 2019, condition: like new (used), machine/vehicle number: AT4-F 32x16/32x16 - wetterfest, Equipment: cooling unit, - what is the air volume for recirculated air – 8 687 m3 Pedpsxvdi Sofx Am Tepw - air volume for fresh air – 2,3 m3/s - cooling capacity – 61 kW - heating capacity – 22 kW - is there humidification / dehumidification available NO - what are dimensions of the unit - 5x1,5x2,8 m / 4000 kg

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm Podpfofyadbsx Am Tepw - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Podpfx Aev Svcyem Topw

Condition: used, filterintermediate filter/sparging filtervacuum unitsuitable for container feedingused, good condition,manufactured by  ALKOlength 1400 mmwidth 1400 mmheight 3000 mmsuction- /blow in connecting piece D 2 x 250 mmcoveringwith discharge / fan ca. 2,0 KW D 160 mmair recirculation possiblewith fans 2 piece2 x 2,0 kWdiameter D 250 mmlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Ppjdpfx Amsvxa N Dj Tow

Condition: new, Technical data:Max. Flow rate in m3/h: 6.800Max. Negative pressure in Pa: 500Rated motor power: 0.75/ 2.1 kW ex (suitable for installation in zone 2 according to ATEX)Filter area in m2: 2Dimensions ( W x D x H) in mm: 2,971 x 1,405 x 1,131Connection diameter: 300 mmSwitch: 2-stage5 m cable with plug and throttle valve Podpevwfm Sofx Am Tjpw

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Psdpev Svc Hefx Am Tspw

Condition: used, Year of construction: 2001, from government authority used, top condition, low hours Manufacturer: AL-KO Model: Mobil Jet 100 Year of manufacture: 2001 Machine no.: 2433306444 Clean air unit / negative pressure GS dust-tested CE type-tested Motor: 1.5 kW Connection diameter: 100 mm Pressure: 1572 Pa Air output: 770 m³/h 1 collection drum 50 cm Manual filter cleaning Filter pressure monitor New price approx. 3,600.00 EUR Space required approx. 1200 x 1700 x 2000 mm Weight approx. 120 kg Location: 97447 Gerolzhofen, loaded free, unpacked Ppodpfx Aoyclxvom Tjw Delivery in current as-inspected condition, without guarantee or warranty

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good Pjdpfxoy Dpfwe Am Tjpw