Used Barfeeder for sale (39)

Condition: used, Year of construction: 2007, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, overall weight: 3,500 kg, For sale: DOOSAN LYNX 220MA CNC turning center, year 2007, equipped with driven tools, C-axis, and FMB SL 80 S automatic short-bar feeder. Technical specifications Manufacturer: DOOSAN Infracore Model: LYNX 220MA Year of manufacture: 2007 CNC control: DOOSAN-FANUC Maximum turning diameter: 250 mm Maximum turning length: 290 mm Maximum bar capacity: 51 mm Main spindle speed: 6,000 rpm Main spindle motor: 15 / 11 kW Chuck size: 6" Turret: 12 stations Driven tools / live tooling: Yes Ljdo Aay Ntjpfx Ah Sshn Maximum live tool speed: 6,000 rpm Live tooling motor: 3.7 kW C-axis: Yes Included equipment FMB SL 80 S automatic short-bar feeder Driven-tool turret C-axis for milling and drilling operations Chip conveyor Tool holders visible in the photographs The machine is suitable for automatic bar machining, including turning, drilling, tapping, and milling operations. Location: Slovenia, EU

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Lhedpfx Aowym Nfjh Sen Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Control: Okuma OSP700L (similar to FANUC) Swing over bed: 450 mm Swing over cross slide: 350 mm Max. turning diameter: 270 mm Max. turning length: 500 mm Chuck size: 8 inches / D206 mm X-axis travel: 155 mm Z-axis travel: 320 mm Main spindle speed: 75 – 3500 rpm (stepless / continuously variable) Main drive power: 7.5 kW Tool turret: 12-station (12-position) Tailstock conus MT5 Transport dimensions (Length x Depth x Height): - Machine: 2500 x 1800 x 2100 mm, Weight: 3800 kg - Bar feeder: 3000 x 1500 x 1300 mm, Weight: 500 kg - Chip conveyor: 2400 x 1500 x 800 mm, Weight: 400 kg - Hydraulic unit for bar feeder: 1000 x 600 x 700 mm, Weight: 200 kg Accessories: - 3-jaw hydraulic chuck with many spare jaws - Collet chuck with many collets - Various tool holders - Bar feeder 1,5 meters with hydraulics - Chip conveyor - Tailstock - Transformer - Original OKUMA manuals Lhedszw Ug Depfx Ah Sjn

Condition: ready for operation (used), Year of construction: 2016, operating hours: 28,151 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, controller manufacturer: FANUC, controller model: F31iB with Celos, number of slots in tool magazine: 32, number of axes: 6, This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details. • Number of turrets: 2 • Number of tool slots: 2 x 16 stations • Main electronic connection: Transformer 95 kVA • Chip conveyor: Yes • 4 x angel live tools will follow • 6 x straight live tool holder will follow • 2 x angel C4 Capto live tool holder will follow • 10 x capto fix tool holders will follow • Possible to buy also robot solution • Well maintained • Only running stainless steel since day one • Chuch high/low pressure both spindles • Spindle 2 tailstock spec • 7 MPa high pressure Knoll system Ledszkrqyopfx Ah Sohn • Coolant gun • Coolant float switch • Chuck top coolant both spindles • Airblow for tool tip both turrets • Airblow for chuck spindle 1 • Oil skimmer • Autodoor • Robot IF • Ethernet IF • Safety fence IF • Barfeeder IF • 10 external M codes • Handwheel • Spindle orientation both spindles • Text engraving function • High Speed canned cycle • Program restart • Island open pockets • 1 mB storage • Additional workpiece coordinate 48 sets • Tool offsets 200 sets • Swing over bed = 800 mm • Swing over cross slide 800 mm • Maximum distance between nose 1130 mm • Max turning diameter 320 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2005, condition: good (used), All parts shown by hand not come. Lodod N I Ezspfx Ah Sehn VAT not included in price.

Condition: good (used), Year of construction: 1990, - For connection to multi-spindle turning centers - Storage: Flat magazine, 4 x 450 mm capacity - Bar diameter: 4-52 mm (depending on the guide channel) - Guide channel diameter: 44 mm Lhsdpfx Ahsihhz Ro Sen - Bar length: approx. 3000-4200 mm - Dimensions L x W x H: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock Ledpfx Ajvw Uqaoh Sohn - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, STAR SR20J II TYPE A Year 2023 Fanuc CNC Control 32i model B 20mm Maximum Bar Capacity Ljdezqdukjpfx Ah Sjhn Y-Axis & C-Axis Capability Live Tooling ALPPS TOOL CO ASR X-20ASII BARFEEDER LNS Swarf Conveyor Very Low Hours Brass-Only Production Since New Selection of Tooling & Consumables Included Machine available near end september 2026

Condition: used, TECHNICAL DETAILS - min. / max. Ø : 2 / 16 [mm] - max. bar length : 4 [m] Lhedpfxjuhbhzj Ah Sen - diameter : 17 - 13 - 6

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Lhjdpfx Aszqt Umsh Sen Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Hydraulic barfeeder SAMECA QUICKSAM 20 Lsdpfx Aov Acinsh Sjhn

Condition: used, Year of construction: 2024, Machine has 0 cutting hours Main spindle machining capacity Max. machining diameter: ø16 mm Max. machining length without re-chucking: 200 mm Max. front drilling diameter: ø10 mm Max. front tapping diameter: M8 Main spindle through-hole: ø20 mm Main spindle speed: max. 12,000 rpm Back spindle Max. back spindle chucking diameter: ø16 mm Max. back drilling diameter: ø8 mm Max. back tapping diameter: M6 Back spindle speed: max. 12,000 rpm Gang tool post (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Lodpfx Aez R Szlsh Sjhn Spindle speed: max. 8,000 rpm Turret (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Number of stations: 10 + α Tooling Number of mountable tools: up to 32 + α Turning tools on gang tool post: 5 × 16 mm Rotary tools on gang tool post: 5–7 Back tool post: 5 fixed tools Drill sleeve: ø19.05 mm Collet, main and back spindle: 138E Guide bush: F605 Feed rates Rapid traverse, all axes (except X2 and Y2): 32 m/min X2 axis: 16 m/min Y2 axis: 8 m/min Motors Main spindle motor: 2.2 / 3.7 kW Back spindle motor: 0.75 / 1.5 kW Rotary tool drives (gang tool post and turret): 0.69 kW Control and dimensions Control: Mitsubishi Meldas M730 Dimensions (W × D × H): 2,780 × 1,340 × 1,790 mm Weight: 2,900 kg Center height: 1,150 mm Option: LFV technology (Low Frequency Vibration) for chip breaking The machine comes with 5 driven tool holders and one holder for the turret. Note that the machine does not come with barfeeder.

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Lodpfx Aozat Tvjh Sshn Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min Lodj Ac Uu Nopfx Ah Sjhn power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: used, TECHNICAL DETAILS - Bar diameter : 5-10-15 [mm] Lhodouhbhbjpfx Ah Sen - Max. bar length : 4500 [mm] - Number of bars : 1

Condition: excellent (used), Year of construction: 2019, operating hours: 2,305 h, functionality: fully functional, TAKISAWA - LA-250YS cnc lathe + FMB Turbo 8-80 barfeeder - number of spindles 2 - swing over bed 600 mm - max turning diameter 370 mm - spindle speed 3500 rpm - bar dia max 75 mm - main spindle; 52 mm - subspindle - turning length 737 mm Lhedpfx Aoy Sm Uljh Son - turret 12, all driven, 4000 rpm - weight 8000 kg (only the lathe) - additional equipment: collet systems on both spindles, barfeeder, filter, high pressure pump, spindle cooling, part catcher, part conveyor, crane for heavy materials, tool holders, collets

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, spindle bore: 51 mm, spindle motor power: 15 W, workpiece weight (max.): 4,500 kg, type of input current: three-phase, Equipment: documentation/manual, We offer this used Miyano BND-51SY CNC lathe, year of construction 2004. Lodpfxszw Dgte Ah Sjhn Model: BND-51SY Serial Number: 21YK63387 2x spindle 1x revolver live tools part collection hand part conveyour belt Iemca barfeeder 2x C axis swarf conveyour Spindle Motor SP1: 11 / 15 kW Spindle Motor SP2: 3.7 / 5.5 kW Fanuc control All books and manual available. Run by oil, under power in production, can be tested. Machine is in very good condition and was running in 1 shift only. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 35,000 h, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 48,000 W, spindle speed (max.): 4,000 rpm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details. • Coolant system: 8/20 bar, 600 L, with paper band filter • External coolant for main and sub spindles • Draw tube: 104 mm • Turrets: 2 x 330 mm VDI30, 16-station star turrets Additional equipment • Bar feeder IF • IRCO bar feeder SIMAG 80.1-R, 3200 mm Lhjdpfxjyuc Apj Ah Son Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: used, Year of construction: 2003, No. of axis 10 No. of spindles 2 Max. spindle bore 16 mm Spindle speeds 100-10000 rpm Live toolings on S2, S3, S5 & S6 Control: Ledpezvb Ryefx Ah Sohn Fanuc PNC 16i Equipped with: Magazine barfeeder FMB Turbo 2-16

Condition: excellent (used), Year of construction: 2010, Victor A26Y 2010 Fanuc 18i TB C-axis, Y-axis Subspindle Live tooling Lhsdpfx Ajy Iwt Doh Sjn Barfeeder Video available!

Condition: used, Year of construction: 2000, No. of axis 10 No. of spindles 2 Ljdpfx Ahezvcduo Sjhn Max. spindle bore 10 mm Spindle speeds 100-16000 rpm Control: Fanuc Equipped with: Magazine barfeeder FMB Minimag Chip conveyor

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 5,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 380 mm, spindle motor power: 15,000 W, overall weight: 8,000 kg, controller manufacturer: MITSUBISHI, controller model: M730VS, number of axes: 8, This 8-axis Citizen BNE-51MSY was manufactured in 2018. It features a maximum bar diameter of Ø 51 mm and a spindle speed of 5,000 min-1. The machine includes 12 turret stations and a slide stroke of 195 mm in the X1 direction. If you are looking to get high-quality turning capabilities, consider the Citizen BNE-51MSY horizontal turning machine we have for sale. Contact us for further details. • Maximum Bar Diameter (SP1): Ø 51 mm Lhsdpfeywy Shsx Ah Sjn • Maximum Bar Diameter (SP2): Ø 51 mm • Spindle Speed (SP1/SP2): 5,000 min-1 • Spindle Motor (SP1): 15/11 kW (15min./cont) • Spindle Motor (SP2): 7.5/5.5 kW (15min./cont) • Turret Stations: 12 ST. (HD1) / 12 ST. (HD2) • Revolving Tool Motor: 2.2 kW • Revolving Tool Torque: 20 Nm • Revolving Tool Speed: Max. 6,000 min-1 • Slide Stroke (X1/Z1): 195 mm / 380 mm • Slide Stroke (X2/Z2): 195 mm / 175 mm • Slide Stroke (Y1): 80 (± 40) mm • Slide Stroke (B): 450 mm • Rapid Feed Rate (X1/Z1): 18 m/min / 20 m/min • Rapid Feed Rate (Y1): 12 m/min • Power Supply Capacity: 44 KVA • Voltage: AC 200/220 V • Coolant Tank Capacity: 350 L • Barfeeder included Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2023, condition: used, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) Lhsdpfey Ndg Hjx Ah Son - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 40 [kW] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 70 [mm] - Max. turning diameter : 360 [mm] - Max. diameter on bench : 700 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 15 - Number of motorized positions : 15 - X/Z stroke : 180/620 [mm] - Y stroke : +45/-45 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 13 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Tailstock stroke : 620 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4551/2065 [mm] - Machine height : 2042 [mm] - Machine weight : 6650 [kg] MACHINE HOURS - Number of hours under power : 1839 [h] - Number of working hours : 263 [h] EQUIPMENT - CNC : Fanuc I-HMI - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Manual guide - 3 colors status lamp - Coolant tank Lodjzv U A Aspfx Ah Sohn - Chips conveyor - Oil mist extractor - Tool probe - Parts catcher - Predisposition for barfeeder - Chuck 3 jaws : 250 [mm]

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm Ledpfxszd Su Es Ah Sshn spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Barfeeder Interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *