Used Barrels for sale (217)

Year of construction: 2015, condition: used, Cap applicator AK 400 for KEG barrels The cap applicator can be used to fit snap-on caps for triangular fittings or key kegs as well as snap-on caps for flat fittings on drums of different diameters. The caps are first removed from the storage bunker into the sorting drum. bunker into the sorting drum. The caps are conveyed in the correct position into the feed rail with electronic quantity monitoring using air pressure. The drum is centred by a parallel gripper to position the cap. The cap is automatically transferred to the fitting head, positioned on the fitting and fitted. Additional title: Cap applicator machine for various fittings Capacity approx.: 300 Keg/h Compressed air: 200 l/min. Max. storage bunker content: 800 caps Power: 1 kW Current: 2,4 Ampere Hsdoxbqqyopfx Ag Nonu Voltage: 380 Volt Frequency: 50 Hz Formats: Snap caps for basket or flat fitting possible Operation / Control: Siemens S7-1500 Base construction: Frame parts made of anodized aluminum profile, and substructure for band height in V2A square tube, with height-adjustable dome feet, Features: Storage bunker made of VA sheet metal, with integrated vibration conveyor, sorting drum with electro-optical position detection of the caps, pneumatic conveyor shaft in the support rail, blower

Condition: as good as new (ex-display), Year of construction: 2025, The BTS-Drum Crusher PLC auto is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Hnedec Spgujpfx Ag Neu Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB PLC auto compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 2023032, total height: 1,830 mm, total width: 1,750 mm, total length: 960 mm, overall weight: 300 kg, input voltage: 480 V, pressure: 6 bar, control cabinet width: 500 mm, control cabinet length: 200 mm, control cabinet height: 600 mm, compressed air connection: 6 bar, tank capacity: 77 l, Equipment: documentation/manual, hot water, semi-automatic KEG cleaner Baby KEG – 2B, Gruber / Austria, new price €22,500, output 20 KEG/h, filling opening for flat fitting 68, 70 or 75mm, for basket fitting 63mm, combination fitting 75mm, filling capacity 5-60 liters Hnedpfov Ilytox Ag Nsu electric heating, container: lye and hot water, Simatic CPU control

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Hnedpfx Ageh U Rznj Neu Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/0001/09472, MACHINE SPECIFICATION Distance between centres 635mm Centre height 165mm Swing Swing over bed 335mm Swing over cross slide 209mm Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Total travel of cross slide 209mm Hjdpfexn Iv Tox Ag Njnu Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor 2.25kW MACHINE SPECIFICATION Cont’d Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.040 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Tailstock Approx weight 800Kg Machine in Imperial execution MACHINE EQUIPPED WITH 3 jaw chuck Quick change toolpost and 6 off toolholders Ainjest high speed screwcutting attachment Single bedstop 5 Position turret bedstop Apron dial Chuck guard Coolant system Rear splashguard

Condition: new, Year of construction: 2025, MASTER BAG 330 Twisted Handle (2025) – Fully Automatic Paper Bag Making Machine Condition: Brand New Availability: In Stock – Immediate Delivery High-Speed Paper Bag Production for Twisted Handle Bags The MASTER BAG 330 TH is a next-generation, fully automatic paper bag machine engineered for medium-sized twisted handle bags. Designed with precision, versatility, and efficiency in mind, it’s perfect for sectors like retail, food delivery, grocery, fashion, and eco-packaging. This 2025 model delivers seamless production with minimal downtime, producing up to 130 high-quality paper bags per minute. Key Features Intuitive touchscreen control with real-time monitoring Eco-friendly gluing system with energy-saving rubber barrel Hydraulic roller change with air shaft feeder Precision alignment via servo motor and ultrasonic sensors Easy-clean handle gluing system with zero downtime High-speed cutting with Japan Yaskawa servo motor SICK sensors for accurate print registration Automatic lubrication for long-term reliability Bag pressing section for premium bag finishing Technical Specifications Feature Value Bag Width 130–330 mm (w/o handle) / 180–330 mm (with handle) Bottom Width 65–180 mm Bag Cutting Length 260–530 mm Paper Roll Width 420–1090 mm Max Speed Up to 130 bags/min Paper Weight 60–150 gsm (w/o handle) / 80–150 gsm (with handle) Handle Rope Diameter 3–5.5 mm Power Supply 380V, 50Hz, 3 Phase Power Consumption 30 KW Dimensions 13,500 × 5,700 × 2,500 mm Weight 18,500 KG Compressed Air 0.6 MPa Humidity Max 65% at 40°C Operating Temp 10°C – 40°C Included After-Sales Services Remote training and commissioning Optional on-site installation 1-year warranty (mechanical & electrical components) Year 1 spare parts kit included Hjdswc Dzkepfx Ag Njnu 24/7 technical support Operator manual + CE Certificate Who Should Consider the MASTER BAG 330 TH? Ideal for: ✔️ Paper bag manufacturers focusing on twisted handle production ✔️ Eco-conscious brands replacing plastic ✔️ Commercial printers expanding into packaging ✔️ Retail and grocery suppliers needing mid-sized bags

Condition: refurbished (used), Year of construction: 2008, operating hours: 35,000 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 48 mm, Now fully refurbished is this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. The machine is now fully refurbished and ready to go, it can be inspected in full operation at our workshop. As a refurbished machine, it is guaranteed to be fault & leak free. Therefore, it’s in our interest to get any niggles out of the machine before it leaves our workshop. We have full work reports available for this machine so you can judge the internal condition for yourself – just ask! BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Hnjdpfoxamn Ejx Ag Neu Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Hodeq R Tkwepfx Ag Nenu Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: used, Roversi Butter Churn 3500 L | Internal Kneaders | Condition : Very Good | IN STOCK ROVERSI 3500 LTR BUTTER CHURN Double jacketed Kneading Rolls inside the barrel Control panel Stainless steel production area Skid Mounted 2 Door Safety closer See through glass Fully Refurbished on order We Design, Print And Deliver Best Quality Packaging Materials offers butter and margarine laminated aluminium foil for form, filling and wrapping machines. Having the experience in sourcing/refubishing used form, filling and wrapping machines for over 25 years, we now offer the packing material at a competative price, keeping the quality of European standards. We offer the complete package from used/refurbished machines, packing material, intsallation and service. Hjdpfxjurug To Ag Nonu Tank volume: 3500 liters Cream capacity: 500 Litres to 1750Litres Note: Skid bent is only for transport reasons not part of the machine

Condition: used, overall weight: 2,700 kg, maximum load weight: 1,600 kg, axle configuration: 2 axles, loading space volume: 2 m³, first registration: 12/2021, next inspection (TÜV): 01/2026, total width: 1,850 mm, total height: 1,940 mm, Vacuum barrel 1500 liters, ideal for sucking up very sandy drilling mud (bentonite), liquids including those with solids, cleaning channels, shafts, pits, emptying mobile toilets, sucking up lye, emulsions and waste water. MEC vacuum compressor with 3500 liters of air output, B+S industrial engine 13 HP, electric start, lockable engine box (aluminum), vacuum max-0.8 bar, overpressure max 0.49 bar, container hot-dip galvanized, good condition. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Hnodpfx Agjvnnv Ro Nsu We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   Hnedpfxsxldidj Ag Nsu MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Chuck Guard Lighting Coolant System Rear Splashguard

Condition: like new (used), Year of construction: 2007, operating hours: 58,263 h, functionality: fully functional, machine/vehicle number: 203130, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 54 g, Equipment: documentation/manual, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial Number: 203130 Year of Manufacture: 2007 Operating Hours: 58,263 h Dimensions: L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Fully functional Condition very well maintained Extras Handling interface Thermoplastic screw/barrel 25 mm, highly wear-resistant Selogica control system Injection unit Screw diameter 25 mm Injection weight 54 g/hp Injection pressure 2500 bar Injection volume 59 cc Hedpfev U Tl Djx Ag Nsnu Clamping unit Clamping force 50 t/500 kN Tiebar spacing 320 x 320 mm Clamping platens 446 x 446 mm Mold installation height 200 mm Maximum spacing between platens 550 mm Ejector stroke/force 125 mm/30 kN Clamping unit hydraulic Motor power 11 KW Heating power 9.4 KW Total power 21 KW The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Warranty Warranty until first commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - we are NOT an agent dealing with third-party property. - All machines offered come from successful companies for which maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, II. choice Manufacturer: SSI Schäfer Volume: 770l Total width: approx. 1.350 mm Total depth: approx. 1.115 mm total height: approx. 1.470 mm Material color barrel: black Material color lid: green tires: 4 tires (2x braked) Dead weight: 68 kg Remark: Useful width and depth are tapered towards the bottom. General information about the item: This item is offered for pickup only. Any additional transport or shipment of this Hedpfek Nmmhex Ag Nsnu or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, bore capacity in steel (diameter) 30 mm throat 250 mm bore stroke 130 mm spindle taper MT 3 MK table: 380 x 380 mm column diameter 98 mm turning speeds 75 - 3200 U/min feeds mm/U total power requirement 1,1 kW weight of the machine ca. 220 kg. range L-W-H 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Hsdpfx Agou Imc Hj Nsnu Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg

Condition: good (used), GRP barrel, storage container, storage tank, silo system, tank, fertilizer storage silo, GRP tank, GRP container -GFK tank: GFK container with subframe -Container: Ø 2000 x 2280 mm, capacity approx. 6.5 m³ Hnsdjwwil Djpfx Ag Nju -Outlet height: 2100 mm -Number: 1x tank available -Price: per piece -Dimensions: Ø 2000 x 4680 mm -Weight: 600 kg/piece

Condition: used, overall weight: 2,700 kg, maximum load weight: 1,600 kg, axle configuration: 2 axles, loading space volume: 2 m³, first registration: 12/2021, next inspection (TÜV): 01/2026, total width: 1,850 mm, total height: 1,940 mm, Vacuum barrel 1500 liters, ideal for sucking up very sandy drilling mud (bentonite), liquids including those with solids, cleaning channels, shafts, pits, emptying mobile toilets, sucking up lye, emulsions and waste water. MEC vacuum compressor with 3500 liters of air output, B+S industrial engine 13 HP, electric start, lockable engine box (aluminum), vacuum max-0.8 bar, overpressure max 0.49 bar, container hot-dip galvanized, good condition. Hnsdpsvnn Rbjfx Ag Neu Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Cincinnati PAK 600 Extruder Specifications The Cincinnati PAK 600 is a single-screw extruder designed for high-throughput plastic processing applications. • Drive System: Requires two electrical drops—one for the control cabinet and another for the drive cabinet. Hedpfx Aewm Ngyog Nsnu • Electrical Load: Maximum amp load depends on the standard AC motor & drive, as well as the number of barrel and die zones. Electrical engineering will determine the exact amp load based on specific configurations. • Operational Rating: Rated at a service factor (SF) of 1.0 at 1750/100 rpm.

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Hnodpjq Rv E Defx Ag Nou The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any Hnedpfjp E Eglox Ag Nsu work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: used, mileage: 866,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, gearing type: automatic, emission class: euro5, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction Description: Trucks with Trailer (MAN, Beverage Body) General The vehicle is a MAN truck with a beverage body and trailer combination. The truck is designed as a drawbar combination (truck + central axle trailer) and is primarily used for beverage transport. 1. Chassis & Cab * Manufacturer: MAN * Model: TGA * Axle configuration: 6x2 * Cab: Spacious sleeper cab, suitable for long-distance haulage * Interior features: * Multifunction steering wheel with integrated controls * Clear dashboard with analog round instruments * Air conditioning and ventilation system * Passenger seat, bunk area behind seats 2. Body (Truck + Trailer) * Body type: Beverage body/box body * Material: Aluminum/composite construction, insulated * Roof: Translucent tarpaulin roof (visible from inside), ideal for daylight use during loading and unloading * Interior floor: Durable wooden floor, heavy-duty, suitable for roll cages, pallet jacks, or pallets 3. Trailer * Design: Central axle trailer, also with beverage body * Axles: 2 axles 4. Application * Mainly for transporting beverages in crates and barrels * Large loading volume due to the combination of truck and trailer * Easily accessible from sides and rear for fast loading and unloading Hnsdpew Ii A Njfx Ag Neu 5. Special Features * Clean interior * Generous cargo space with robust floor * Well-equipped driver's cab * Suitable for national and regional logistics

Condition: good (used), revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center center -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted -Recording: MK5 -Quantity: 1x centering tip available Hnjdpfx Agsrp Ilaj Neu -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused Hodpfx Agoxg I Elo Nenu - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nitrogen of different products, to help in their grinding process (plastics for instance) or maintain their properties (food for instance). The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. Hnsdpfx Aoq Rv Hhsg Nsu A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min Hjdpfx Ajp E Ed Reg Nonu working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Year of construction: 2024, condition: like new (used), functionality: fully functional, Rental Hosokawa Alpine RO 28/40 system by Alpine Rentals. Cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, non gas tight Material of construction: -product contacted parts: stainless steel Hnodpfx Aov Dalpeg Nou -non product contacted parts: normal steel Food grade Wear protection: without Scope of supply Complete Hosokawa Alpine Rotoplex RO28/40 production plant consisting of: mill inlet with safe design for manual feeding, mill with rotor, knifes and sieve for the rotor, including a relays control cabinet everything fitted on a frame, product fines collecting barrel and vacuum cleaner with filter. REMARK: The user must provide an on site operating platform for the operator to safely handle the feed material and feed it in to the mill. This is NOT part of our scope. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery