Used Barford Sxr 6000 for sale (2,173)

Condition: good (used), functionality: fully functional, We offer a miter saw with 4 cutting units. Detel saw Type CDM 2X2-6000 2 x 2 units of 2.2 kW each Disc diameter 180 mm Pneumatic clamps Nlodpfxjxn Rlqe Abujh Milling cutter holder Waste conveyor belt Motor with brake Frequency-controlled motors

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Nlsdey Eu Tvjpfx Abush Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: used, functionality: fully functional, For sale: a brushless servomotor BOSCH SE-LB3.075.060-04.000 with permanent magnets and a 24 V holding brake. Data from the nameplate: - Manufacturer: BOSCH - Model: SE-LB3.075.060-04.000 - Part number: Starting torque M₀: 8.2 Nm - Current I₀: 14.0 A - Rated speed: 6000 rpm - Rotor moment of inertia: 17.9 kg·cm² - Protection rating according to the nameplate: IP65 - Insulation class: F - Brake: 24 V, 8 Nm, 0.6 A - Country of manufacture: Germany Nlsdps Adudmefx Abush Condition: used, tested, motor is fully functional. Visible signs of use and a damaged connector – the connector cover is broken and the connector housing has cracks, as shown in the pictures. The connector requires repair or replacement before installation.

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Nlsdpfoy Shc Djx Abujh

Condition: used, Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Item description: For sale is a HAAKE RheoStress 6000 rotational rheometer from Thermo Scientific – a highly precise measuring instrument for the rheological characterization of various materials. Ideally suited for use in research, development, or quality control. However, the device is not operational as the air bearing is defective. Technical specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 min⁻¹ Speed range (CS mode): 10⁻⁷ to 1500 min⁻¹ Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special features: Very high measurement accuracy due to low inertia Precise lifting mechanism (0.5 µm setting accuracy) Nsdpfszia Iwjx Abuolh Modularly expandable (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new FoodMAC International Ltd BULLDOG 6000/600 Electric Fryer for frying cut potatoes and similar products, year of construction 2023. Model: FRE 6000/600 Voltage: 400 V Njdozgt D Hjpfx Abuslh Power: 200 kW Year of manufacture: 2023 Weight: 1980 kg Machine number: 3035 Capacity: 1500 kg/h If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2017, Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to approximately 30 strapping cycles per minute. -Frame internal dimensions approximately 850 x 600 mm. -Secure strapping with 12 mm strap. -Automatic strap feed and return. -Adjustable strap tension. -Strapping can be triggered via hand button or foot switch, or alternatively automatic operation selectable (sensor in the tabletop). -Simple and ergonomic spool change and threading system. -Equipped with ergonomic roller conveyors on the table surface. -Working height approximately 820 mm. -The machine is mobile on castors. Nedpfx Aboyxqrnjuolh -The machine can be demonstrated under power.

Condition: used, axle configuration: 1 axle, loading space length: 4,200 mm, loading space width: 1,950 mm, loading space height: 650 mm, loading space volume: 5 m³, Year of construction: 2020 Carrying capacity: 6.000 kg VAT/margin: VAT qualifying Nodpez S Au Dofx Abuolh Tyre size on axle 1: 500/50/17 Tyre size on axle rear: 500/50/17 Availability: in stock

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Nedpfx Abjwd D Itoujlh

Condition: used, Hermle Z 200 A Centrifuge – Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A can accommodate up to 12 x 15 ml tubes with conical and round bottoms. Specifications: Capacity: max. 12 x 15 ml / 6 x 50 ml Speed: Nlsdpfx Ajm Albdobujh max. speed/RCF: 6000 rpm / 4185 xg min. speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: button-controlled in 250 rpm increments Speed display: preset and actual speed – digital Run time: max. time: 30 min. / continuous operation min. time: 0.5 min. Preset: 0.5 - 30 min. / “Hold” Time setting: 0.5 min. increments via button press Time display: remaining time – digital Brake: fixed braking force with soft stop Features: - Microprocessor-controlled - DC motor, covered - ABS plastic housing, impact-resistant and chemical-resistant Safety: - Lid locking system - Automatic imbalance detection with safety shut-off - Manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inches): Width: 28 / 11.0 Height: 26 / 10.2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges – new and used – in our shop! International shipping costs available upon request!

Condition: used, Description: CTS climate test chamber Nlsdpfoygr E Rjx Abueh CW-60/6 -60°C to +120°C 6,000 liters (6 m³) Temperature range: -60 °C to +120 °C Temperature deviation: ±0.5 to 1 K over time Heating: 1 K/min from -40 °C to +80 °C Cooling: 1 K/min from +80 °C to -40 °C Temperature range: +10 °C to +95 °C Humidity range: 10% to 85% relative humidity In dew point range: +5°C to +89°C Temperature deviation: ±0.5 K over time Humidity deviation: ±1 to ±3% r.h. over time Dimensions: Internal dimensions: Volume: approx. 6,000 liters (6 m³) Approx. internal dimensions: Height: 2,000 mm, Width: 2,000 mm, Depth: 1,500 mm

Condition: used, Year of construction: 2014, Kannegiesser belt conveyor GF 6000-880-800 RA2299 Make: Kannegiesser as good as new, exhibition machine year of construction 2014 Conveyor length (FL): 6000 mm Belt width (GB): 800 mm Nsdpetvhvvefx Abujlh Nominal/outer width (NB): 880 mm Conveyor speed: freely adjustable between -0,95 and 0,95 m/s Electrical data: 380V, 0.25kW Without controls/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2015, condition: ready for operation (used), A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible. Njdpfxsy D Trnj Abuelh

Condition: good (used), Year of construction: 2017, machine/vehicle number: 17002702, Offer 25276 Extraction Filter System / Stationary Filter Unit with Wet Separator Technical Data: - suitable for moist, sticky dusts, metallic grinding - with heavy spark generation Njdpfjx Upd Uex Abuolh - single and multi-station extraction - volumetric flow approx. 5,150 m³/h - water capacity 390 l - drive power 400 V / 7.5 kW - required space W 1250 x H 3650 x D 1100 mm - weight approx. 550 kg

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Nodpfxjyrg H He Abuolh

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available within 3 to 3,5 months, will be generally overhauled for Customer´s order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Njdpfx Abezwfc Njujlh Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Nlodpfx Asq Izpnjbuoh Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline belt conveyor GF 6000+3800-700-600 RA2199 Technical data: Conveyor length (NL): 9800 mm ( 6000 mm + 3800 mm ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Nledpfxsq Imuno Abuoh Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: reconditioned (used), functionality: fully functional, The Aciera F3 is a compact, precision bench milling machine renowned for its robust construction and excellent surface finish. Widely used in toolrooms and prototyping workshops, it provides precise control for machining small to medium-sized parts. Nedjznh Ehjpfx Abuslh

Condition: used, Year of construction: 2005, machine/vehicle number: ET222, Used labeling machine PE Master M for adhesive labels 6000 bph Technical overview of the model PE Labelers built the used labeling machine PE Master M for adhesive labels 6000 bph in 2005 to serve medium-capacity bottling lines. Specifically, the machine handles 0.75-liter bottles and processes up to 6000 bottles per hour. As a result, it provides an optimal solution for operations requiring consistent output. Mechanical configuration and operation The manufacturer equipped the PE Master M with six rotating plates that move bottles along a clockwise carousel. Additionally, three labeling stations apply adhesive labels precisely to the front, back, and neck of each container, thereby ensuring full coverage of all critical areas. In comparison to older models, this configuration offers improved label positioning. Self-adhesive labeling method The used labeling machine PE Master M for adhesive labels 6000 bph uses a self-adhesive system to apply labels quickly and with high precision. Notably, the system handles pre-printed labels that adhere immediately, thus eliminating the need for glue. Consequently, it reduces maintenance requirements. Furthermore, the adhesive technology enhances line cleanliness and operator efficiency. Njdo Adyygepfx Abuelh Centering system and manual adjustments A mechanical centering system aligns each bottle correctly throughout the labeling process. Therefore, the machine maintains consistency even at high speeds. Operators adjust the label heads manually, which in turn enables fast format changes and precise corrections. Moreover, this setup supports production flexibility. Integrated safety measures The machine includes built-in safety guards that comply with CE regulations. For this reason, it protects operators during cleaning, maintenance, and changeovers. As expected, such safety features align with modern industrial standards. In addition, the layout facilitates quick access to internal components. Energy consumption and system compatibility The used labeling machine PE Master M for adhesive labels 6000 bph draws 3 kW of power and runs on 400 Volt, 50 Hz electrical systems. Consequently, technicians can easily integrate it into standard European production lines. Despite its age, the machine remains compatible with most existing plant infrastructure. Weight and structural durability PE Labelers engineered this model with a solid 1500 kg structure, which ensures high stability during operation. Above all, the steel frame resists corrosion and withstands demanding industr...

Condition: good (used), Year of construction: 2014, Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. - Up to approximately 30 strapping cycles per minute. - Frame inner dimensions approximately 850 x 600 mm. - Secure strapping with 12 mm strap. - Automatic strap feed and return. - Adjustable strap tension. Njdpeyxqwqsfx Abujlh - Strapping can be triggered via button or alternatively, automatic mode selectable (sensor in the tabletop). - Simple and ergonomic spool change and threading system. - Equipped with ergonomic roller conveyors on the tabletop. - Working height approximately 820 mm. - Machine can be moved on castor wheels. The machine can be demonstrated under power.

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 6000+800-700-600 RA2181 Technical data: Conveyor length (NL): 6800 mm (6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Nodpfx Aoq H T Rnjbujlh

Year of construction: 2021, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 4500 mm TRANSVERSAL TRAVEL: 1300 mm VERTICAL TRAVEL: 1800 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 6000 x 1100 mm Nodpfxex Dfkge Abuolh TABLE HEIGHT FROM FLOOR LEVEL: 850 mm SPINDLE: 20-4000 rpm; 37-43 kW; 900-1045 Nm; ISO 50 HEAD: MILLING AND BORING AXIAL HEAD TOOL MAGAZINE: CHAIN-TYPE ; 60 POS CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 24800 Kg OVERALL DIMENSIONS: 6970 x 4310 x 4150 mm ACCESSORIES: SWARF CONVEYOR ; LINEAR SCALES ; TOUCH PROBE NOTE: OPERATOR'S PLATFORM

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline belt conveyor with leading belt GF 1300+6000+1900-700-600 RA2072 Technical data: Conveyor length (NL): 9200 mm ( 1900 mm arch + 6000 mm riser segment + 1300 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Nlodpon N A Ifofx Abuoh Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2025, Overview Nodpfx Abezbhi Ijuelh This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Technical data - Capacity: - approx. 70 cans/min (500 ml) - approx. 100 cans/min (250 / 330 ml) - Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) - Application: Filling and seaming of cans (beer, soft drinks, RTDs) - Configuration: 10 filling valves / 2 seaming heads - Filling system: Counter-pressure filling - Filling pressure: approx. 0.15 – 0.4 MPa - Filling temperature: approx. 1 – 4 °C - CO₂ management: Pre-purging and undercover gassing, oxygen reduction system - Seaming system: Lid size 202 (200 optional), manual lid feeding - Control system: Siemens S7-1200 PLC with HMI touchscreen - Drive system: Frequency inverter (Danfoss), unified drive - Utilities: - Power consumption: approx. 5 kW - Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa - CO₂ supply: ≥ 0.3 MPa - Water consumption: approx. 0.2 m³/h - Dimensions: approx. 3,153 × 1,980 × 2,350 mm - Weight: approx. 5,500 kg Scope of Delivery - Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer - Control system | Siemens | S7-1200 | PLC with touchscreen HMI - Drive system | Danfoss | Frequency inverter - Filling valve cores | 1 set - Seaming rollers | 1 set (#1 and #2) - Seaming chuck | 1 unit - Can mouth seals | 10 units - Filling valve seals | 10 sets