Used Brandt Kd 77 C for sale (95)

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: Crsdpfx Apjzux T Ajmoi The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear Cedpfx Aszuyp Sjpmsri - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm Crsdpfxox Hyzhj Apmoi -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Cjdjy N Ukiopfx Apmeri

Condition: used, BRANDT ambition 1440 edger well-equipped, Pre-milling cutters Edge trimming unit Crodpfx Ae Ahm S Uepmei glue application by roller pneumatic pre-trimmer pressure rollers trimming cutters up-and-down milling unit 2 x corner rounding units R1-R2, adjustable from the control panel profile edgebanding unit, pneumatically activated flat edgebanding unit, pneumatically activated polishing unit max. workpiece height 60mm max. veneer thickness in roll 3mm feed rate max. 14m/min Good condition

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Crjdpfx Ash U Nzpepmoi Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: Credpfxjc Tmygj Apmei • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine Crjdpfx Ajgylrdspmei -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, overall weight: 1,500 kg, controller model: Easy Control EC 10+, The machine has been completely overhauled! TECHNICAL DETAILS Edge material, strip: 0.4–6 mm Edge material, roll: 3 mm Workpiece thickness: 8–60 mm Workpiece width at workpiece thickness 8–22 mm: min. 70 mm Feed rate: 11 m/min Tool set Radius: 2 mm Joint milling unit Motor power: 2 × 2.2 kW Frequency: 200 Hz Cutting unit Motor power: 2 × 0.18 kW Milling unit Motor power: 2 × 0.27 kW Cjdpfxoz Iru Dj Apmjri Profile milling unit Motor power: 1 × 0.35 kW Design: WD 60 Working height: 950 mm MACHINE DETAILS Connected power: 9.8 kW Dust extraction connection: 1 × 120 mm / 3 × 80 mm / 1 × 100 mm Power supply: 400 V / 3 phase / 50 Hz Pneumatic pressure: 6 bar Dimensions & Weight Dimensions (L x W x H): 4,773 x 1,525 × 2,182 mm Weight: 1,500 kg EQUIPMENT Electronic control system Easy Control EC 10+ Automatic edge feeding Tool set R = 2 mm Joint milling unit Gluing unit A6 Pneumatic 2-point adjustment of the pressure zone Cutting unit for chamfer and straight processing Pneumatic adjustment of the cutting unit for chamfer and straight processing Milling unit, counter-rotating Pneumatic adjustment of the milling unit for chamfer, radius, and straight processing Profile milling unit WD 60 Scraper blade with quick-change heads Pneumatic adjustment of the scraper blade Glue joint scraper blade Smoothing unit with 2 motors Control texts in German and English Operating manuals for commissioning, operation, and maintenance in English on DIN-A4 paper and CD-ROM Operating manuals for commissioning, operation, and maintenance in German on a USB stick Spare parts labels in German and English New tools included

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Preliminary milling unit Granulate adhesive station Pneumatic pre-cutting guillotine Cutting unit with two saws Profiling milling unit Profiling cutter Polishing machines Crodpezz Nnksfx Apmoi Year of manufacture: 2009 Machine length: 3.7 m CE marking Weight: approximately 1100 kg Technical documentation: YES Function activation from the control panel External dimensions: 3700x1260x1600

Condition: good (used), Brandt edge banding machine with AIRTEC + jointing unit Adhesive: EVA / PUR / Airtec Roll material: 0.4-3 mm edge thickness Strip material: 0.4-15 mm (12 mm) edge thickness Workpiece thickness: 8-60 mm Recently serviced! Jointing unit OVERVIEW OF UNIT CONFIGURATION: JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz GLUING UNIT A12 END TRIMMING UNIT CHAMFER/STRAIGHT 2 x 0.35 kW PNEUMATIC ADJUSTMENT END TRIMMING CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING PRE-MILLING UNIT 2 x 0.55 kW 0 DEGREES PNEUMATIC 2-POINT ADJUSTMENT MULTIFUNCTION SHAPING MILLING UNIT 2 x 0.4 kW PROFILE SCRAPER WITH QUICK-CHANGE HEADS PNEUMATIC SCRAPER ADJUSTMENT GLUE JOINT SCRAPER BUFFING UNIT Feed speed: 8-18 m/min, with contour milling cutter 14 m/min Total length: 5760 mm Roll material: 0.3-3 mm Strip material: 3-15 mm (With VKNR 4845 exchangeable milling units, max. edge thickness is 12 mm!) GLUING UNIT A12 Crodpfx Aoyz Sxbepmei WORKPIECE PRE-HEATING QUICKMELT APPLICATION UNIT ADHESIVE REACTIVATION Infrared Workpiece return system BOOMERRANG TFU 140/R 20 Year of manufacture: 2016 As shown in illustrations Available from November 2026 All data taken from the data sheet, therefore subject to change Technical specifications available on request

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Suitable for curved shaped edges Crjdpfezc Hxqex Apmei Good condition, possible to test !

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm -Weight: 28 kg Crjdpfegylrpex Apmsi

Condition: used, Year of construction: 2010, Edge banding machine Manufacturer: Brandt Type: Optimat KTD 720 Year of manufacture: 2010 Crodpfx Apjzuzlbsmoi Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, Edge milling machine Manufacturer: Brandt Type: FTK 130 Cjdpfjzuzlhex Apmeri Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm Cedpfx Ajw S Dmdepmeri 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Crodpfx Apjy Uv Umomoi Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: used, machine/vehicle number: 006603, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Cjdpfjyngz Aox Apmori Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), functionality: fully functional, Type: OPTIMAT F 13 Year of manufacture: 2001 Condition: function-tested, very good, used - Workpiece thickness: 16 to 55 mm - Minimum workpiece width: 30 mm - Minimum inner radius: 35 mm - Maximum edge thickness: 3 mm - 2 milling motors 0.4 kW - Extraction connection 80 mm Crodpsx Rrbzsfx Apmsi

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-261-04-5659, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 14 m/min, controller model: Power Control Check 20+, grinding spindle motor power: 2,200 W, TECHNICAL DETAILS Panel height: 8 - 60 mm Codpfxjydim Ts Apmjri PVC/ABS thickness: 3 mm Pre-scoring depth for wood: up to 8 mm Feed speed: 8 - 14 m/min MACHINE DETAILS Control unit: Power Control Check 20+ Output per sanding motor: 2.2 kW Supply voltage: 400Y/230 V Phases: 3 Frequency: 50 Hz Full load operating current: max. 23 A Largest motor: 4.5 A Largest heating circuit: 3.1 A EQUIPMENT Electrically adjustable working length via CNC Lateral roller conveyor with idler rollers for panel support Coil holder plate Gluing unit for EVA adhesive with pre-filler and glue tank Edge pressure unit for straight profiles, with CNC-adjustable pressure rollers Indexing group with automatic tilt adjustment Overlapping milling unit with 2 motors Rounding unit with 2 multifunction motors (chamfering + rounding) with CNC automatic adjustment Edge scraper unit Glue scraper unit Brush unit

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges - Foot switch for processing molded parts Crsdpszk N Ehsfx Apmsi - Workpiece thickness: 10–50 mm - Heating power: 3 kW - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Location: Röllbach

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW Crodpfxexw Tngo Apmoi EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Credpfx Apoq Ehpaemei Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Credpfx Aowq Sc Sepmsi Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Condition: used, Year of construction: 1988, used, good conditionmanufactured by Brandttype F10 + EK 11 - trimmingbuilt in 1988Masch.-No. 0-260-01-2188/0-260-01-2746required space ca. 1100 mm x 1100 mm x 1700 mmlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revision,without guarantee and warranty Csdovwf Txepfx Apmori