Used Brandt Kdf 650 for sale (101)

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Lodpew S Dmdefx Afwjrr Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system Ledpfx Afoc Tmygeworr glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Lodoy Uv Umepfx Afworr Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: used, machine/vehicle number: 008161, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Lrodpox A Tlcjfx Afwjr Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: used, machine/vehicle number: 008160, Type of edging: Thin edge, Thick edge Lrjdpfx Asxqm Iyjfwor Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 006603, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Ljdpfxeyngz Ae Afwjrr Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for profile strips and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, minimum internal radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable 4 – 9 m/min, 2.6 kW, 400 Volt. Transport available at additional cost! Lrsdpfovf H I Tox Afwor Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: ready for operation (used), functionality: fully functional, Type: OPTIMAT F 13 Year of manufacture: 2001 Condition: function-tested, very good, used - Workpiece thickness: 16 to 55 mm - Minimum workpiece width: 30 mm - Minimum inner radius: 35 mm - Maximum edge thickness: 3 mm - 2 milling motors 0.4 kW - Extraction connection 80 mm Ljdpfxjx Rrbzo Afwjrr

Condition: used, Year of construction: 1989, • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 – depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm • Electrical supply: 220 V - 1 phase - 50 Hz Lrodpfx Afsk E Hrbowjr • Power consumption (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Work table height (mm): 1000 • Edge trimming unit: for processing thick PVC edges • Weight (kg): approx. 120

Year of construction: 1988, condition: used, • Maximum working length (mm): 3100 • Maximum profile height (mm): 200 Ljdskx Hpaspfx Afworr

Condition: used, Year of construction: 1988, - with a lateral miter saw Lredpfjbaz E Ajx Afwer

Condition: used, Year of construction: 1988, used, good conditionmanufactured by Brandttype F10 + EK 11 - trimmingbuilt in 1988Masch.-No. 0-260-01-2188/0-260-01-2746required space ca. 1100 mm x 1100 mm x 1700 mmlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revision,without guarantee and warranty Lrsdpfx Afjvwf Txswor

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Lrodpfxeq Ehpas Afwor Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Lrjdpfx Aexw Tngefwor Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Ledpsxw Tugofx Afworr Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Suitable for curved shaped edges Lsdpfxszc Hxqo Afwjrr Good condition, possible to test !

Condition: excellent (used), Gluing unit Cross-cut saw Two straight cutters Two rounding cutters Ljdjxdy Slepfx Afwsrr

Condition: excellent (used), Gluing machine Ledettu Rijpfx Afwerr Guillotine cross-cut saws milling cutter Scraper Polishing machine

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-261-04-5659, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 14 m/min, controller model: Power Control Check 20+, grinding spindle motor power: 2,200 W, TECHNICAL DETAILS Panel height: 8 - 60 mm PVC/ABS thickness: 3 mm Pre-scoring depth for wood: up to 8 mm Feed speed: 8 - 14 m/min MACHINE DETAILS Control unit: Power Control Check 20+ Ljdeydim Topfx Afwsrr Output per sanding motor: 2.2 kW Supply voltage: 400Y/230 V Phases: 3 Frequency: 50 Hz Full load operating current: max. 23 A Largest motor: 4.5 A Largest heating circuit: 3.1 A EQUIPMENT Electrically adjustable working length via CNC Lateral roller conveyor with idler rollers for panel support Coil holder plate Gluing unit for EVA adhesive with pre-filler and glue tank Edge pressure unit for straight profiles, with CNC-adjustable pressure rollers Indexing group with automatic tilt adjustment Overlapping milling unit with 2 motors Rounding unit with 2 multifunction motors (chamfering + rounding) with CNC automatic adjustment Edge scraper unit Glue scraper unit Brush unit

Condition: ready for operation (used), functionality: fully functional, working height: 60 mm, TECHNICAL DETAILS Max. panel height: 60 mm PVC/ABS edge height: 3 mm MACHINE DETAILS Ljdpfx Afeyzm R Sswerr Power-Touch control: 21" full HD display EQUIPMENT - Anti-adhesive unit - Twin-motor corner copying unit - Roll holder plate - EVA glue application unit with pre-melter and glue pot - Edge pressure unit for straight profiles with pressure rollers - End trimming saw unit with automatic swivel adjustment - Double-motor beveling unit with adjustable setting - Double-motor multifunctional rounding unit (beveling + rounding) - Working height electronically adjustable via NC control - Workpiece support guide with idler rollers - Side roller conveyor with free-running wheels - Edge scraper unit - Glue scraper unit - Brushing unit External reference: MMG013

Condition: excellent (used), Year of construction: 2011, operating hours: 10,150 h, Manufacturer: BRANDT Ljdpfxeywzc Is Afwsrr Model: Ambition 1600 GC Grooving unit Equipment: Pre-milling unit – DIA heads Maximum edge thickness: 12 mm Feed speed: 18 m/min Pneumatic unit Maximum edge height: 66 mm Glue granulate container Trim saw, 2 motors, straight or chamfered cut End rounding unit, 2 motors Profile scraper Flat scraper Polishing machine Dimensions: Length: 6600 mm Width with grinding disc: 1400 mm Height: 1800 mm Weight: approx. 2900 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Glue station for granulate Pneumatic pre-cut guillotine Trimming unit with two saw blades Profiling milling unit with profile cutters Profile scraper Polishing units Lrodpsx I A Dusfx Afwor Year of manufacture: 2009 Machine length: 3.7 m

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Lrsdoy N Ukiopfx Afwer

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Lodpjwun Irsfx Afwsrr Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Ledpfxsu N T Ews Afworr Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.