Used Brewery for sale (98)

Condition: not inspected (used), Brewery tanks comprising: Moeschle mash tun, 9,000 litre Gjdpfxowifdtj Ab Uskf Moeschle stainless steel copper kettle, 12,350 litre Moeschle cold liquor tank, 18,000 litre 2 - Moeschle square fermentation vessels, each 11,700 litre STB Engineering fermentation vessel, 11,800 litre, 2400mm square Eastfield Process stainless steel tank, advised circa 5,000 litre 4 - Moeschle racking / conditioning vessels, 8,850 litre / 8,950 litre

Condition: used, tank capacity: 5,982 l, GENERAL Equipment: butterfly valve, spray head Design: vertical Max. overpressure: 0.9 bar Support: height-adjustable feet Location: outdoor storage Nameplate: Volume: 5,982 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: beer VESSEL Max. operating temperature vessel / °C: 20 °C EQUIPMENT Gsdpfx Asxqdg Hsb Uskf Manhole / dome: in the cylinder Outlet: available

Condition: used, Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - Cleaning lance for dispensing tanks - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrigeration dryer - Water treatment (PENTAIR) - Refrigeration system with compressor, buffer tank, equalising tank, refrigerant pump - Pipework Additional title: 10 hl brewhouse with storage tanks and supply technology, largely built in 2019 Cast wort capacity: 1000 l Gkodpfexwyzaox Ab Usf Material: Brewhouse from stainless steel Features: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindroconical storage tank, booster pump, beer pump, CO2 warning device; cleaning lance, pressure reducer, tap heads, hoses, refrigeration system, compressed air system, electric steam generator, water treatment, pipework

Year of construction: 2017, operating hours: 400 h, condition: excellent (used), functionality: fully functional, A high-end Austrian complete / turn key Brewery, newly purchased in 2017 directly from the owner. It has only been used approx. 100 times in 5 years. Maintained very well. It can do 2 brews simultaneously, so effectively a 10HL machine. Complete with 4 Uni-tanks of 12 HL and all necessary equipment, as well as all necessary hoses plus a mobile pump for CIP of the Unitanks, etc. Delivery possible per direct, located in the Amsterdam area. Gsdpfx Abjv R Evaj Uokf

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, BREWERIES & DISTILLERIES Sp. z o.o. has been providing professional consulting, design, and implementation of beer and distillate production lines for many years. We manufacture private label brands for our clients, as well as automated drink dispensing systems. Our competitive advantage is our highly qualified and experienced engineering team, which allows us to offer comprehensive turn-key project execution. To date in Poland, we have designed and commissioned 28 craft breweries and 3 craft distilleries, produced over 200 private label artisanal alcohol brands for our clients, as well as launched 30 DRINK WALL automatic drink dispensing systems in hotels and restaurants. We would like to offer you a used SALM brewpub brewery. SALM has been continuously manufacturing complete brewing systems since 1924. The brewery was produced in 2023 for a client in Bucharest and has only brewed 5 batches to date, making this installation practically brand new! The brewery is in perfect technical and visual condition. Below is the full technical specification of the offered brewery: Annual production capacity: 1,100 hl/beer 1. Two-vessel brewhouse, 5.5 hl, stainless steel, A-frame design, including Salm Brewmatic 02 computerized control system - 1 unit. Gjdpfx Asx Aky Dsb Uokf 2. Copper cladding on the cylindrical sections of the mash and lauter tuns. 3. Stainless steel brewery platforms - 2 units. 4. External kettle for wort heating, equipped with an atmospheric gas burner (natural gas or propane) - 1 unit. 5. Steam condenser for the brewhouse, mash tun, and lauter tun, stainless steel construction with built-in injection condenser and fan for odorless operation and DMS removal - 1 unit. 6. Two-roller malt mill - 1 unit. 7. Two-stage wort cooler - 1 unit. 8. Automatic mains water chiller, activates at water temperatures above 10°C - 1 unit. 9. Stainless steel whirlpool sedimentation vessel - 1 unit. 10. Mobile beer pump - 1 unit. 11. Wort aeration system - 1 unit. 12. Oil-free air compressor - 1 unit. 13. Glycol cooling system - 1 unit. 14. Stainless steel, double-walled, PU-insulated hot water tank - 1 unit. 15. Brewhouse access ladder - 1 unit. 16. UNI tanks, 11 hl, double-walled, 100mm PU-insulated, integrated cooling jacket, stainless steel 1.4301, 1.0 bar, built-in CIP - 6 units. 17. TÜV inspection, 6 UNI tanks with a nameplate on each unit. 18. Serving tanks for finished beer, 3.0 bar, 10 hl capacity, stainless steel 1.4301, PU foam insulated, water jacket, horizontal with frame - 4 units. 19. Electronic temperature control for each UNI and serving tank - 10 units. 20. Control cable with protective hose and threaded connector for each UNI and serving tank - 10 units. 21. Set of pipes and fittings for on-site piping installation - 1 set. 22. Set including 1 beer hose, 22m long with fittings, and mini-laboratory. The brewery has type approval from the Polish Central Office of Measures (Główny Urząd Miar) in Warsaw. Upon request, we can organize transport of the brewery from Bucharest to Poland and its installation on site. We are happy to send you more photos and a video presentation of the brewery by email.

Year of construction: 2017, condition: used, functionality: fully functional, A complete brewery setup is available for sale, including: brewing system, pressure/fermentation and storage tanks, cooling unit, bottling system, labeler, and optionally all trademark, image, and domain rights of the Hebenbräu brand. Brewing system components: Brewiks Microbrewery 500 liters - 1 x mash tun / wort tun (capacity 760 l, touchscreen control panel, electric heating, pump, insulation, mounted on casters); 1 x lauter tun / whirlpool (capacity 840 l, whirlpool function, sparge nozzle, wort cooler (tubular heat exchanger), heated via wall transfer, mounted on wheels); 5 x pressure tank / fermentation and storage tank ZKT10HL (gross volume 1350 l / tank, double jacket made of stainless steel, cooling in the cylinder and conical section, PT 100 temperature probe); 1 x Chilly MAX 90 LT cooling unit; 1 x bottling system; 1 x labeler. Further information available upon request and on our website. Gjdpewg Ea Ajfx Ab Uekf

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, PSS 35hl brewery for sale including: * Grain storage, milling and handling * 35hl brewhouse comprising mash tun, lauter tun, wort kettle, whirlpool, HLT, CLT * 18 - PSS FT-140HL fermentation vessels * Yeast tanks * 3-tank CIP plant * Centec Degas 5hl/hr de-aeration system * Romfil XFA8-B filtration unit Gkodpfxjv Av Ane Ab Ujf * Centec FlashPasto 25hl/hr flash pasteuriser * 2 - 140hl bright beer tanks * Services including Certuss TC1500 steam generator, RO plant, glycol system, compressed air plant Equipment manufactured 2018, installation incomplete

Condition: used, tank capacity: 250,000 l, GENERAL Design: upright Outside diameter: 4,550 mm Overall height: 22,950 mm Insulation: available Stand type: support ring Location: outdoor storage Technical documentation: various documents Nameplate: Volume: 250,000 litres Gkodpfxjxqdgtj Ab Uef Wall thickness cylinder: 5 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: brewery INSULATION Insulation jacket: riveted Insulation material: PU foam Insulation jacket material: aluminium Insulation thickness / mm: 150 mm EQUIPMENT Outlet: available TECHNICAL DATA / MASSES Bottom wall thickness: 15 mm

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013) with refrigerant R134a. Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator, Gedpfx Aow Uvfwsb Ujkf

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Brewhouse Stainless steel lauter tun with copper cladding, 1800 liters. Stainless steel mash tun with copper cladding, 1800 liters. Steam generator, stainless steel, 800 liters. Hot water tank, stainless steel, 3600 liters. Leach tank, stainless steel, 397 liters. Stainless steel tank, stainless steel, 1900 liters. Plate heat exchanger: M9 NBN Plate heat exchanger: SIGMA M13 NAL SIEMENS control system 5 centrifugal pumps Storage Total volume: approx. 48,000 liters. 3 x horizontal stainless steel tanks, identical, 1600 liters each, on a frame with casters. 3 x vertical stainless steel tanks, identical, 1600 liters each. 1 x vertical stainless steel tank, stainless steel, 2100 liters. 11 x stainless steel tanks V2A vertical, identical, 2000 lt each. Gksdpfewiu Twsx Ab Ujf 4 x V2A horizontal stainless steel tanks, on a frame, identical, 1000 lt each. 5 x V2A vertical stainless steel tanks, identical, 1690 lt each.

Condition: ready for operation (used), functionality: fully functional, Up for auction is a complete brewery and bottling line comprising: - Brewery plant (including brewhouse, fermentation and storage tanks, and additional accessories) - Bottle filling line Gkjdpfewxw U Nsx Ab Usf TECHNICAL DETAILS BREWERY PLANT Brewhouse Manufacturer: Shandong Year of manufacture: 2019 Capacity: 20-25 hl Components: mash tun, lauter tun, kettle/boiling wort kettle, whirlpool Valves: manual shut-off valves Wort cooler: 2-stage Hot water tank: included Fermentation and Storage Tanks Fermentation tanks: 6 units of 2,760 l each (CCT tanks) Year of manufacture: 2019 Insulation: included, with jacket cooling Operating pressure: 3 bar CIP-capable: yes Storage tanks: 12 units of 2,760 l each (horizontal tanks) Year of manufacture: 2019 Operating pressure: 3 bar Additional Equipment Malt mill: Shandong, 2019 Steam generator: Yano, Shanghai, 2019, output: 200kg/h, oil-fired Chillers (glycol): 2 units of 28 kW each, 2019 Glycol tank: included Reverse osmosis system: included Compressor: JAN, 585 l/min, 2020 KEG Filling KEG washer: with automatic caustic replenishment and steam heating KEG filler: up to 70 kegs/h Control: Siemens S7 Fitting: Type S (basket fitting) BOTTLE FILLING LINE Bottle washing machine: SEN Year of manufacture: 1989, overhauled & installed 2020 Output: max. 1,500 bottles/h Isobaric filler block: Shandong Yuesheng, 2019 Stations: 14 rinsing, 12 filling, 5 capping stations Technology: with pre-evacuation and counter-pressure filling Format parts: for 0.33 l longneck & 0.5 l NRW bottles Dry tunnel: Shandong Yuesheng, 2019 Labeller: with laser printer Collection table: included

Condition: excellent (used), functionality: fully functional, Brewiks 700L batch + whirlpool 2X 1000L fermentation tank 1300L fermentation tank 3X 600L fermentation tank Gkodpfxsv A Rcps Ab Uef Water filter Robix Roppi 600 mill Chiller 26 KW + 600L stainless steel tank CIP Can also be purchased separately Seller is a private individual

Year of construction: 2021, operating hours: 360 h, condition: excellent (used), functionality: fully functional, The brewhouse features a 470 L wort kettle and a 500 L lauter tun. Heating is electric with a power rating of 21 kW. The heating elements are integrated into both the wall and the base. The brewhouse efficiency is up to a maximum of 74%. Original wort content can be achieved up to 18 degrees Plato. It is a two-vessel brewhouse, consisting of a mash tun/wort kettle combination and a lauter tun/whirlpool vessel. Under the mash tun, there is a high-efficiency pump, enabling the wort to be mixed and transferred between vessels using hoses. Recipe management, automatic mashing program, timer function, and manual operation mode are all controlled via a control unit equipped with a 7-inch touch display. The built-in plate heat exchanger for sparge water preparation enables direct heating of tap water to the required temperature and gentle spraying into the lauter tun through jets in the lid. An additional hot water preparation unit is not necessary. The integrated tube heat exchanger for wort cooling is installed within the insulated double wall of the brew kettle. This heat exchanger can cool hot wort from 96°C down to approximately 18°C in just 30 minutes using fresh water. The resulting cooling water can be collected directly back into the mash tun. This heated cooling water can be reused for the next brew. Gedpfxowv Ndks Ab Uokf Mash tun dimensions (L x W x H): 1.4 m x 1.4 m x 1.2 m

Condition: used, Year of construction: 2012, Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmospheric monoblock bottling and capping machine for 33 cl bottles with filling capacity of 1,200 containers/hour. 2 compressors necessary for the operation of the bottling machine. 1 manual 6-spout filler for emergencies and special bottles. Semi-automatic adhesive labeler. 1 compressor necessary for the labeler. Ribbon printer for adding variables to the labels, with rewinder. 1 pallet truck. 6m x 2.50m x 3m high refrigeration chamber. Industrial scale. Including all sandwich panels from which the production rooms are made Gkjdpfx Absuzpips Usf

Year of construction: 2010, condition: excellent (used), Complete microbrewery for sale: Brewhouse 10 HL: High-quality brewing pan (Schulz), double-walled with smooth cooking process, lauter tun and whirlpool, complete piping, hoses. Automatic mashing with electrical pannel, control for hot water heating, malt mill, small appliances. Fermentation cellar: Wort cooler, ice water container, 5 open fermentation tanks 10HL, 5 storage tanks 20 HL, 3 serving tanks 10 HL. Wort pump, hoses, temperature control. Precoat filter, yeast pan. Bottle cellar: Godpfx Abjf Ni Rvj Uokf Fully automatic inline filler, 8 digits, soft wheel, round bottle cleaner Lots of accessories, small parts, hoses, etc. For sale as build in. Cranes and loaders for free.

Year of construction: 2013, condition: like new (used), Turn-key drink equipment for beer production. Capacity: 1000 l/brew for up to 200.000 l/y. Suitable for different recipes. Based on an external cooker (Calandria system). Full automation of production. Gksdpfx Asigvxkob Ujf

Year of construction: 2019, condition: used, consisting of: - Malt milll - Mash-/Wortkettle/Whirlpool - Lauter tun - Warmwater vessel - Wort cooler - Wort aeration - Siemens touch screen - 4 x Fermenting vessel - 8 x Storage tanks with shell cooling surface - Icewater vessel - mobile beerpump - Steam boiler - 2 Bottle-filler + 1 Can-filler by Fillmatic - bottle filler A. Gruber Additional title: 5 hl-Brewery, with Grist Mill, Compact-Brewhouse, Fermenting vats, Storage tanks Gkjdpovcqk Hsfx Ab Usf Cast out wort: 500 l Capacity wort cooler: 750 l/h Wort cooling time: 40 min. Material: Brewing vessel, hotwater tank, fermenting and storage tanks in stainless steel, 1.4301 Base construction: Brewhouse compact unit on stainless steel frame, vertical Fermenting vats on feet, horizontal storage tanks on two layer in a stainless steel frame. Features: mobile grist mill, mash-/wortkettle, lauter tun, warm water tank, wort-cooling and aeration, 4 fermenting vats, 8 storage tanks with temperature control, pumps, hoses, bottle- and can-filler, bottle-washer, ice water tank, steam generator

Year of construction: 2020, condition: used, tank capacity: 2,700 l, GENERAL INFORMATION Equipment: Disc valve, spray head Design: upright Year of construction: 2020 Notes: Stated total height according to drawing; CE marking and declaration of conformity available only for 2 vessels External diameter: 1,650 mm Internal diameter: 1,450 mm Total height: 2,550 mm Heating/cooling: available Insulation: available Max. allowable operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Base type: height-adjustable feet Location: outdoor storage Technical documentation: drawing, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Volume: 2,700 litres Double jacket volume: 10.0 litres Product-contact material: V2A 1.4301 (AISI304) Gjdpox Dlpcsfx Ab Uskf Condition: used Cylindrical height: 1,250 mm Previous application: brewery VESSEL Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manhole / dome: in cylinder Outlet: DN32 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, 2 x 30,000 Jacketed, Agitated brewery tanks. Can be brought individually. Buyer to collect. Gkedpfsxxkhtjx Ab Ujf

Condition: excellent (used), Year of construction: 2022, ICS Cool Energy Type: IC 305 Year of manufacture: 2022 ICS Cool Energy i-Chiller IC 305 – Industrial Water Chiller 8 kW For sale is a compact industrial water chiller (process chiller) of the type i-Chiller IC 305 by ICS Cool Energy. This unit is ideally suited for cooling machinery, processes, or laboratory applications. Gksdsw S Txiepfx Ab Usf Features / Equipment: - Integrated hydraulic system (including pump, expansion tank, etc.) - Robust “coil-in-tank” evaporator system for high operational reliability - Compact, space-saving design - Plug-and-play installation – immediately ready for use - Suitable for a wide range of applications: plastics processing, food industry, breweries, recycling, laboratories, and more. Technical details - Cooling capacity: 8 kW (nominal output) - Power consumption: 3.64 kW - Energy efficiency (EER): 2.85 - Power supply: 400 V ± 10 %, 3-phase + PE, 50 Hz - Max. ambient temperature: 46 °C - Compressor(s): 1 unit - Refrigerant: R410A - Tank volume: 115 l - Dimensions (L×W×H): 660 × 1315 × 1420 mm - Noise level: 81 dB(A) sound power, 53 dB(A) sound pressure - Weight (operating weight): approx. 220 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change or error!) For any further questions, please contact us by phone.

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps)  Gkedpfexrfcxjx Ab Uef

Condition: used, Year of construction: 2024, New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice cream Fermentation, Sauces, Brewery industry, etc. Applications: - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products. - Cheese Production: Used before cheese-making to ensure safety. - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream. Advantages of Batch Pasteurisation: - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations. - Flexibility: Suitable for small batches or varied products and recipes. - Quality Control: Allows for greater control over the pasteurisation process. Capacity: 600 Litres Agitation: Upon Request Temperatures: 95 Degrees Max Heating: Via Heating Elements Self Heated Gkedpfjxl N Nijx Ab Uof Chart Recorder: Digital Chart Recorder Construction: Fully Stainless Steel Jacketed: Fully Insulated Thickness of Stainelss steel: 3 mm Outlet: DN 40 Top Cover: Open top cover with twin openings CIP: Spray ball Cooling: Circulation of cold water through the jacket Temperature Loss: 2 degrees Over 8 hours Temperature Regulation: Controller to Adjust Temperatures Safety Sensor: No water in jacket No Heating Available: Immediately Finance Available: Pay Monthly, Ask For A Quote

Condition: used, tank capacity: 1,020 l, GENERAL Design: horizontal Remarks: Cooling system consisting of a copper pipe installed along the entire length of the tank; various manufacturers, therefore slight differences in design (for example, the tank from manufacturer Müller has a different frame and varying pressure ratings compared to the other two tanks, see photos) Heating/Cooling: available Insulation: available Max. permitted operating temperature: 50 °C Max. permitted operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Stand type: Frame Location: outdoor storage Nameplate: Volume: 1,020 liters Double jacket volume: 3.0 liters Godpfx Abex Dln Sj Uskf Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: brewery TANK Max. permitted operating temperature: 50 °C INSULATION Insulating jacket: hermetically welded Insulation material: PU foam Insulation jacket material: stainless steel FEATURES Manhole / Dome: handhole MATERIAL SPECIFICATION Temperature control system material: copper

Condition: used, Year of construction: 2018, Overview  This brewhouse was manufactured in 2018 by Slovenian company SKRLJ d.o.o. The BH-3 brewhouse has a batch capacity of 20 hL and is designed as a semi-automatic system with steam heating. It includes all main process vessels and a wide range of accessories, making it suitable for medium-sized breweries. The system is currently available. Technical data Capacity: 20 hL per batch Hot water tank: 4,586 L, steam heating jacket Cold water tank: 4,400 L, glycol cooling jacket Heating: Steam Control: Semi-automatic with PLC Scope of Delivery  Brewhouse | SKRLJ d.o.o. | BH-3 | 2018 | 20 hL, semi-automatic, steam-heated Hot water tank | SKRLJ d.o.o. | – | 2018 | 4,586 L, steam heating jacket Cold water tank | SKRLJ d.o.o. | – | 2018 | 4,400 L, glycol cooling jacket Grist bin | SKRLJ d.o.o. | – | 2018 | 500 kg capacity 2-stage heat exchanger | SKRLJ d.o.o. | – | 2018 | Stainless steel Accessories: wort aeration system, spent grain remover, grist hydrator, CIP sprayballs, temperature probes, steam jacket solenoids, 2 sanitary centrifugal pumps, electronic flow meter, manual cold/hot water mixer with thermometer, PLC for pump/recipe/temperature control   Gsdjxcng Iopfx Ab Uskf

Condition: used, Year of construction: 2025, New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc. Applications: - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products. - Cheese Production: Used before cheese-making to ensure safety. - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream. Advantages of Batch Pasteurisation: Gkedpfx Ajxl N H Uob Uef - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations. - Flexibility: Suitable for small batches or varied products and recipes. - Quality Control: Allows for greater control over the pasteurisation process. Volume capabilities (litres): 300 Control panel: Stainless steel Control box, Controls, Thermometer Controller, ON/OFF Agitator, Chart Recorder; ; Heating options: Heating Elements, Hot Water and Steam Milk pasteurisation: 68-75c Max temperatures: 95c Cooling options: Connection to Ice Bank and Circulation Cold water through the Jacket; Plate Cooler Connection on the Outlet; Heating time: Between 30m-1hr for BPT100 to BPT500 Series With Heating Elements; BPT600 -BPT2000 Heating by HOT water or Steam; Cooling time: 30min to 45min Depending on Cooling Temperatures; Plate cooler at 30min Standard; Structure: Stainless steel 316L & 304 Triple Jacket with Insulation; ; Agitation: Slow Agitation with double props at two diferent levels; High Shear mixing for Ice Cream; Cleaning: Spray ball internally for even cleaning by circulation of Hot water and chemicals used in the food industry; ; Automation: We offer Full automation on our batch Pasteurisers that cover the full circle of heating down to cooling; Additional Costs will be added for automation; Openings: Two Up Folding Covers for Easy Cleaning and Inspection; ; Product outlet: DIN40-DIN50 On semi cone to make sure all product flows out; ; Uasege: Milk Pasteurisation/ Ice Cream Mixing/ Ice Cream Fermentation/ Sauces/; ; Lead time: 5-8 weeks from Order Delays may apply during COVID 19; ; Finance Available: Pay Monthly, Ask For A Quote