Used Briquetting for sale (174)

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even Bedpfju R Sxxsx Al Uedg voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Bdsdszpxhijpfx Al Usg Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: refurbished (used), Year of construction: 2025, I sell the heavy duty briquetting press RUF RB440. Year 11/2002, Fully reconditioned with warranty 2025 Motor power 30kW Productivity Amount 440 pcs. wood briquettes / hr. Wood briquette RUF 150 x 60 x 40-110mm (depends on material) Material humidity up to 15% Nominal pressing power 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total power 3000kg Composition right - right side input Condition after full recondition / 500 working hours warranty like new. Available immediately. Including full documentation and CE. Bdjdowun I Eepfx Al Uog

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 2,000 mm, total height: 1,800 mm, total length: 5,500 mm, overall weight: 6,500 kg, type of input current: three-phase, power: 150 kW (203.94 HP), Stetson Ross 6-12-C1 Planer/Moulder Reliable Stetson Ross 6-12-C1 woodworking machine for sale. Robust industrial design, built for intensive operation. Ideal for planing, profiling, and processing boards, logs, and surfaces in large quantities. The machine runs smoothly, has been regularly maintained, and is ready for immediate use. Equipment overview: Bdedpfx Asxvn Tbol Ueg Model: Stetson Ross 6-12-C1 Application: wood planing / profiling Solid industrial construction Smooth operation and high processing quality

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Bdsdpswa Rlkefx Al Ueg Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: new, Year of construction: 2023, Dear customers, For a quick and reliable response to your inquiry, we kindly ask you to contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, capture all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you further! Technical data of the briquetting press: Throughput: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg Bedekuz Tuopfx Al Ujdg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - Inspection cover - Transport tube mount for briquetting press - Viewing window in the container Requirements for the raw material for briquetting: - The moisture content (dry basis) must be between at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must provide protection against hydraulic oil loss - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm.

Condition: new, For industrial production of rectangular briquettes The ZBP 500 compacts pressable materials into high-density briquettes. The briquettes are easy to store and, thanks to their stackability, can be transported efficiently. In the press chamber of the hydraulic press unit, the briquettes are shaped by a pressure cylinder. This allows up to nine briquettes per minute to be produced with a pressing force of 1 kg/cm². Standard equipment:  Safety limit switches for oil temperature and oil level  Oil cooler  Automatic briquette length monitoring  Automatic hopper fill level monitoring  Control cabinet with PLC control for fully automatic operation Options:  Custom hopper extension available to meet customer requirements Bdodsyr I Hzjpfx Al Uog  Press stamp with inscription / logo

Condition: excellent (used), Catalogue number: 7984 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70 mm - hopper diameter: 1000 mm - output: up to 10 briquettes/min, approx. 90 kg/h - automatic machine operation - motor: 5.5 kW - dimensions (L/W/H): 1800x1200x1500 mm - weight: approx. 650 kg ADVANTAGES – Italian manufacture – used briquetting press Bedjzwwxcopfx Al Uedg – not repainted – very good condition Net price: 33,900 PLN Net price: 8,070 EUR (at an exchange rate of 4.2 PLN/EUR) (Prices may vary with significant currency fluctuations)

Condition: used, Year of construction: 2017, machine/vehicle number: MR007053, Extraction unit with briquetting press, the machine is in good condition and ready for immediate use. The extraction unit is equipped with a Falach 35 briquetting press. The extraction system includes: - Electrical coupling between the extraction unit and the briquetting press (in case of a briquetting press failure, the extraction unit stops) - Automatic start of the briquetting press - Briquetting press capacity - approximately 35 kg/h (depending on the type of dust) Technical specifications: - Airflow (m3/h): 6000 - Dimensions (L x W x H): 3,120 x 1,050 x 3,350 mm - Diameter of extraction inlet: 300 mm Bdsdpfx Alozhmm Do Uog - Motor power (kW): 7.5 kW

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Bdedpeyr I Hnofx Al Ueg Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.

Condition: new, Year of construction: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations with required throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-strength briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options are possible, e.g., oil cooling for use in continuous operation. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Bdodeil Hggspfx Al Usg User-friendly operation thanks to Siemens PLC control To fulfill our promise of performance, we design and manufacture all control cabinets ourselves at our Ilsfeld location and equip them with well-known international components. This guarantees the highest quality in a compact design. The Siemens PLC control used is perfectly tailored to the requirements of the briquetting process. Foreign object-resistant conveying screw thanks to cardan suspension The conveying screw, which transports the material into the pre-compactor of the briquetting press, is suspended on a cardan joint. This prevents foreign objects from causing damage to the conveying screw. As is often the case, however, the specific application determines which suspension is chosen. For metal applications, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (liters): 250 Weight (approx. kg): 1100 Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale

Condition: good (used), Technical data: Briquetting press RUF RB 440 Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Length: 40 - 110 mm Bedpjt H D Ezofx Al Uedg Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4 kW Bsdpfx Aevptrtel Uodg Press Output per hour: depended on material Hopper opening: 1.044 x 1.044mm Controlled by PLC Hydraulic tank: 100l New exhibition machine with 5 operating hours

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. Bdsdpfx Asv Rpxlsl Ueg If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: used, Year of construction: 2007, Filtration with briquette press Bdsdpfx Alozm Uw Io Ueg 4kW press group Briquets 120/45mm 400V

Condition: good (used), Year of construction: 1992, functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 TECHNICAL PARAMETERS: power of main engine 7.5 kW machine output approx. 80 kg/h briquette diameter 50 mm feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption Bdsdpfx Ajt U Et Njl Usg - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption - simple operation The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h Bodpfsxy E H Hjx Al Usdg - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: excellent (used), Year of construction: 2001, Briquetting press for metal chips or granules only tested on a trial basis hardly used 20 operating hours Bjdpfx Ajfb T Huel Usdg 2000 kg/cm2

Condition: new, 20-26-537/4 FALACH hydraulic briquetting press (new) Type CUBE 20 Briquette diameter 30 x 30 mm Press capacity 10-25 kg/hour Briquette length approx. 6-50 mm Hopper volume 0,28 m3 Pump motor input 2,2 kW Power consumption 1,1 kW/hour Required input voltage and current 3x400V, 16 A Oil cooler no Operation continuous Automatic reverse of support wheels no Automatic switching-out no Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 62 dB Transport dimensions 1300-740-1120 mm Bdodpsxrn Uwefx Al Uog Weight 233 kg Price 8190 Eur (EXW Jonava, Lithuania)

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Bdedpfx Alsw R Ranj Ueg Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: excellent (used), Briquette production machine with a diameter of 80 mm and a capacity of 150 to 180 kg per hour, depending on the material. Bdodpfeyi Utiex Al Ueg The machine has undergone a complete overhaul by an authorized service provider. The hydraulic pump has been replaced with a reinforced cast-iron unit, a steel hydraulic block has been installed, new Rexroth valves, new hydraulic hoses, new hydraulic oil and hydraulic filter, as well as new sealing and wear strips have been fitted. The control cabinet has been serviced, and the screw feeder motor features two speeds. The price includes commissioning within Poland using the customer’s material. For genuinely interested parties, I can provide a video of the machine in operation.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Bdodpfjxyi Ihex Al Uog Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Tank diameter: 1000 mm Tank height: 930+1000+2400 (filter) mm Capacity: ~60 kg/h Power supply: 380V Motor power: 5.5 kW Safety switch Option to purchase the filter separately Filter dimensions: Connection diameter: 1000 mm Width: 1700 mm Height: 2400 mm Overall dimensions: Length: 1600 mm Bjdpfszd Erdjx Al Uodg Width: 1200 mm Height: 1500+1000+2400 mm

Condition: new, Sale from stock- New -Briquetting press GP Genius I/40Briquette diameter: 40 mmPressing capacity: material-dependentHopper opening: 900 x 900 mmHopper height: 1025 mmHopper capacity standard: approx. 0.6 m³Motor power: 4.10 kWConnected load: 400 V /- 5% / 50 HzControl cabinet: electronically controlled via PLCHydraulic unit: with approx. 50 l tank for hydraulic oilPaint finish: RAL 7016 5017Overall dimensions: L = 1,600 mm, W = 1,250 mm,H = 1,300 mmWeight: approx. 550 omatic briquette length control, automatic adjustmentof length depending on material density- gear motor with screw conveyor for screw pre-compaction- permanent agitator- connection part for transport tube- chrome-plated tongs- manual control of all cylinders- automatic end position of all cylinders- safety switch for oil temperature- automatic switch-off in the event of bridging in the container andinterruption of the pressing cycle due to foreign bodies- CE-compliant- automatic ON/OFF rotary encoder- oil temperature switch- automatic switch-off in the event of bridging in the container andinterruption of the pressing cycle due to foreign bodies- CE-compliant- automatic ON/OFF rotary encoder ON/OFF- Oil temperature monitor- 2 transport pipe bends 90°, radius 500No. 001 003 Bdjdpfxszd Hcwe Al Usg

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery set, like new (in operation since 06/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12 x 18 m) Evolution 7450 vertical machining center Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024) consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquetting press Bdodpfjzh Hw Aex Al Ujg shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, each 7.5 kW (1 of which is new and in operation since 06/2024) 1x Ayen multi-spindle drilling machine, custom-built, with a 2.5 m stop rail 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks, Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks, Cesab, including initial lift (year of manufacture 2025) Various workbenches, templates, pallet racking, material trolleys, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Benchtop drill press Stürmer Festool table saw Bosch large panel miter saw on stand EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, pictures and details of the individual items can be provided.