Used Briquetting for sale (177)

Year of construction: 2018, condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Gedpfxsu Dal Hs Aayokb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x1800x1900 mm Weight 3000 kg Gksdpfx Aaovz Ex Nsysb Total power requirement 33,5 kw

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Godpsfci D Aefx Aayokb Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors Gkjdpfx Ajxfwdjaysb + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, filter area: 100 m², total height: 6,200 mm, total length: 2,150 mm, total width: 2,050 mm, Equipment: CE marking, Very well-maintained extraction unit from Schuko. Located indoors / in a stairwell. Filter hoses are like new. Automatic shaker mechanism, negative pressure system. Control for air recirculation and additional accessories are available. The unit must be dismantled in the stairwell. WEIMA briquetting press mounted underneath, can be taken over together with the unit. Gedpsy Ippkjfx Aayskb

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Gedpfed Nnwlox Aayskb Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Year of construction: 2008, condition: ready for operation (used), A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible. Godpfsx El Ahox Aayjkb

Condition: new, Year of construction: 2026, THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips produced in the wood processing industry. The briquetting process can generate additional revenue and reduce storage and transportation costs. Another advantage is the flexibility of our wood briquetting presses. You can press different material grains into high-quality briquettes without any binding agents. As a valuable source of energy, RUF briquettes therefore have a higher utility value and an optimum CO2 balance. Our LIGNUM series also shines thanks to the innovative RUF hydraulics with high energy efficiency and low wear. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life - Low maintenance costs - Compact design - Direct integration into existing production systems possible - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquettes - Without binder - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM CLASSIC Max. throughput of wood (kg/h) 410 Motor power (kW) 30 Max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.1 x 1.9 x 2.0 Approx. weight (t) 3.3 t Gkodpfx Aoq Rut Tjayeb Availability/delivery time after consultation

Condition: new, Year of construction: 2026, BRIQUETTING WOOD CHIPS AND GENERATING MORE REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way - without the use of binding agents. The briquetting process allows you to achieve higher yields while reducing transportation and storage costs. Our robust wood briquetting presses from the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life & low wear Gkodoq Ruvvspfx Aayjb - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - More revenue for briquettes - Without binding agent - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM R4 Max. throughput of wood (kg/h) 590 Motor power (kW) 30 max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.9 x 2.1 x 2.1 Approx. weight (t) 4.1 t Availability/delivery time after consultation

Condition: used, SECOND-HAND SUBFILTERING EXTRACTION PLANT COLLAVINI - USED - Fan motor 7.5 kw - 64 filter clothes - Clothes diameter 200 mm - Clothes length 1700 mm - Estimated max. filtering capacity 10.000 m3/h (current fan approx. 6000 m3/h Gkodswra Npopfx Aayob - Vibrating filter bag cleaning system - Year 2008 - CE rules N.B. the discharge instead of clothes or screw conveyor has been adapted to feed a briquetting machine

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *available upon request New: With the frequency converter option, up to a maximum of 45% can be eligible for government subsidies. Combination of: mütek briquetting press MPP 60 + dust extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical data of the briquetting press: Gjdsd Su Hxopfx Aayskb Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquet diameter: 50 mm Front socket: 50 mm Briquet stroke max.: 40 mm Briquet stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery is also possible in 2 parts Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Option: cooling of the press jaws: no Option: cooling of the hydraulic oil: yes Option: level monitoring: yes CE compliant 2. Technical data of the clean air dust extraction unit MMJET 350: Dust extraction connection diameter: 350 mm Motor: 11 kW Dust extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Gedpfxoxpi T Ae Aayjkb Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher Gkedpfx Aevxlqmeayob New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. Gkeded Nm Sispfx Aayob * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: new, Hydraulic Machine, Approx. 7 cycles per minute with the machine at full capacity, 3 Cylinders, 1 Mono-bloc clamp, Max. length of each expulsion 60 mm, 1 Capacitance probe, Octagonal drum diam. 1000 mm. Volume capacity ~ 0.2 m3, End of cycle device, Electronic pressure gauges, pump and clamp, Siemens Touch Screen PLC, Siemens Display, Counter, Inductive limit switches, Machine position control via LEDs, Tapping head, Gedpfodz Dmgsx Aayjkb Pre-Heating System, Temperature and oil level probe, Current stabilizer, Service keys, Voltage 400V – 50 Hz (Different voltages on request); Standard Painting: Structure RAL 9010, protection casing RAL 9006.

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Gedpfxjffh Ate Aayekb Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: new, The new 100F briquetting press from Holzprofi impresses with its mature, simple and solid construction. The press is designed for trade and industry. Made in EU ! Gsdpfx Ajvrvfnjayjkb Technical data: Motor output power 100% ED 11 kW Briquette diameter 70 mm Power consumption approx. 8200 W/h Capacity 90 - 120 kg/h Chip bunker 0.75 m³ Weight 810 kg weight briquettes approx. 900 - 1100 Kg/m³ Sound pressure level 68 dB Dimensions: 2220 x 1200 x 1510 mm standard equipment: With built-on oil cooler Vibration unit to prevent bridging of sawdust Automatic change of direction of rotation of the shaft Automatic switch-off Timer to start machine Special equipment on request: Carousel with 5 containers Filtering unit Modification of silo to fit filter systems of all manufacturers (eg AL-KO, Felder, Scheuch Lingo, Airmex, Nestro, Schuko, Höcker)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 3,375 mm, WEIMA Crusher Series HWV 3000 (37 kW) and the Single-Shaft Shredder WL12 (30 kW) Ideal for pre-shredding wood waste such as pallets, followed by metal separation and secondary shredding. Advantages: Two-stage process: Pre- and post-shredding for maximum efficiency. Versatile use: Wood chips for heating systems or briquetting presses. Low-noise operation Technical details – HWV 3000: - Power: 37 kW - Dimensions (hopper): 3375 mm width x 1630 mm height - Cutting knives: 58 knives in two rows Technical details – WL12/30: - Power: 30 kW - Shaft diameter: 368 mm - Screen: 15/20 mm Godpfx Aasy Ubvpoyskb Applications - Wood waste processing and recycling - Energy generation through wood chips or briquetting

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Gkodpou R S A Refx Aayeb Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Rental Hosokawa Alpine CS 25 compactor system by Alpine Rentals. Gkodsvq Rirepfx Aayeb Technical details Material of construction: - product contacting parts: stainless steel - non product contacting parts: stainless steel/mild steel - non ATEX - Non Pressure Shock Resistant (NPSR) Scope of supply Compactor CS25 with 11kW motor and AFC 200 capable of producing briquettes, granulates, pellets and even be used as a roller crusher depending on the fitted rolls (pending availability). The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: new, The cost-effective single-shaft shredders of the ZWS series enable the realization of a wide range of size reduction tasks, such as a preliminary stage for subsequent briquetting, the production of wood chips for combustion, or re-introduction into the particleboard industry. Depending on throughput and material, the machines can be customized to meet specific requirements. Typical material for shredding includes: Gjdpfxeyr I Ils Aayekb - Large panel and board offcuts - Wooden pallets - Waste from joinery workshops - Packaging wood - Construction and demolition timber - Veneers, MDF, and particleboard

Condition: new, Year of construction: 2023, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Always in stock, available as left-hand and right-hand models with motorized cleaning. Riedex DM-200 Motor power 4.0 kW Ready for connection. Packaged on a pallet! Ready for shipment. Alternatively, also available with JET cleaning. Many different versions are possible ... - with cell wheel lock (if desired, with a subframe) - with briquetting press etc. Godpfeku Aibox Aayjkb

Condition: new, Year of construction: 2023, Dear customers, To ensure prompt and reliable processing of your request, we kindly ask you to contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! Always in stock, available as left-hand and right-hand versions with motorized cleaning. Riedex DM-160 Motor power 3.0 kW Ready for connection. Packaged on a pallet! Ready for shipment. Alternatively, also available with JET cleaning. Many different versions are possible: - with a rotary valve lock (if desired, with a subframe) Gkodpfxeku Aifs Aayob - with a briquetting press etc.

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Gkedjxpximopfx Aayob Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-20 concrete block machine is a fully automatic block production facility equipped with modern production technologies and a hydraulic system. Thanks to its PLC-controlled structure, it produces with high precision without the need for operator intervention. Operating at a pressure of 100-160 bar, the system has the capacity to produce 20 interlocks and 8 20x40x20 blocks per press. Furthermore, it minimizes labor requirements thanks to a collection robot that automatically stacks and packages dried products. The BS-20 offers an environmentally friendly production approach with its A+ energy-efficient motor system, EFF3 class electric motors, and low energy consumption. It meets European quality standards with its ISO 9001:2008 quality management system, CE certificate, and DIN-TSEK compliant structure. It provides a user-friendly experience with its automatic/manual switching system that increases operational flexibility, remote fault detection via the internet, and forklift-compatible design. BS-20 Concrete Block Machine Technical Specifications Production Capacity: 100–110 pallets per hour Pallet Size: 1,000 x 920 x 230 mm Gksdpfxoxpi Tie Aayjb Control: PLC Automation System (Schneider) Bunker Capacity: 1.2 m³ Hydraulic Oil Capacity: 400 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Product Height (max): 3,000 mm Product Length (max): 600 mm Machine Chassis: 10 mm Production in 8 Hours: 8,000 blocks / 18,000 interlocks Why Should You Choose the Constmach BS-20 Concrete Block Making Machine? The BS-20 Concrete Block Machine offers high efficiency, low operating costs, and long-lasting use for medium-sized businesses. Manufactured with the assurance of CONSTMACH engineering, this system delivers uninterrupted production performance thanks to its automation capabilities and robust construction. With spare parts warranty, fast service network, and 24/7 technical support, CONSTMACH ensures your investment operates reliably for many years. Therefore, by choosing the BS-20 model, you can maximize both your production quality and operational efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.