Used Briquetting for sale (170)

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container dimensions (on customer request) Left- or right-hand design Hydraulics with separate oil tank All series can also be equipped as "DUO" variants Tedpfx Aoghgcisaced Wood chips, sawdust, sawdust etc. accumulate in all craft and industrial enterprises of the wood processing industry. Enormous storage and transport costs are claimed for this on a daily basis. Briquetting presses offer an ideal solution to this problem, as briquettes, on the other hand, are easy and space-saving to store and transport. In addition, spontaneous combustion is much less. The briquetting presses require little space, are robustly built and equipped with low-maintenance technology. Whether wood, paper, biomass, foam or polystyrene - the ZBP briquettes any suitable material. With a throughput capacity of up to 35 - 130 kg/h, they are particularly suitable for small and medium-sized companies. Versatile set-up options due to availability as left-hand and right-hand versions. So start briquetting!

Condition: as good as new (ex-display), Year of construction: 2023, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) Demonstration machine with approx. 10 operating hours Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Tedpfx Aaofci D Aecjd Technical data: Briquette dimensions: approx. 35 x 35 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity up to 25 kg / h *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: -Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, C7m2mgj Surcharge + 690 € net (delivery time then approx. 8 weeks) ---

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, briquette diameter: 60 mm, Reconditioned machine suitable for smaller single-shift joinery operations. It offers a robust construction with good performance. Max. briquette production 70 kg/hour. Year of manufacture 2003. Very good and preserved condition. Original warranty and after-sales service directly from our company. PRODECO professional hydraulic briquetting presses are suitable for small and medium-sized wood processing plants. They allow efficient processing of waste into ecologically clean and high calorific fuel without the use of binders. They are characterized by low space requirements, low energy consumption and simple operation. Technical data: Engine power: 5.5 kW Briquette production: 35 to 70 kg/hr depending on material Briquette diameter: 60 mm Briquette steps max 60 mm (infinite briquette) Hopper diameter: 1000 mm Weight 650 kg Machine dimensions: 1170 x 1700 x 1510 mm Features: Tedpfx Aajvva Rpscjd Hydraulic unit 7 press cycles/min. Double pressure gauge for better pressure control. Level probe for briquetted material Probe for oil level height Inspection window CE safety standard Moisture content of the material to be processed must not exceed 18% Machine is fully reconditioned, adjusted, and tested.

Condition: used, In a woodworking plant, several hundred kilograms of dry wood waste, wood shavings, sawdust, etc. can be generated daily. This in-house waste can be processed into raw material suitable for briquetting. With a complete hydraulic briquetting system — capable of producing 50-120 kg of briquettes per hour — the wood waste generated in the workshop can be efficiently converted into wood briquettes. In this way, the building can be heated using the briquettes. The investment can pay for itself within a year, and afterwards, it can generate profit. Additionally, the system provides efficient, cost-effective waste processing. An optional oil cooler can be connected to the E70 Eco model, enabling continuous operation. Thanks to the higher capacity, the machine does not need to run for a full eight hours per day, since the same amount of briquettes can be produced within a shorter period. Todpsxl Ri Dofx Aacjd

Year of construction: 2017, condition: ready for operation (used), Technical data will follow! Todpegny Rysfx Aaced

Condition: new, Year of construction: 2024, The E60 Super briquetting machine is a highly efficient briquetting machine, the speed of which, depending on the processed material, ranges from 40 to 100 kg/h. The device uses a 10kM engine. Tjdpfxetvmf Ns Aacod The briquetting machine is powered by 400V - 50Hz. The output material has a diameter and maximum length of 60mm. The device has a double pressure gauge, a device for measuring the oil level and a viewing window. SIEMENS LCD control, maintenance-free operation of the machine. Processed materials: • sawdust, • paper, • straw • etc. Briquette diameter: 60mm Engine power: 7.5 kW, IE2, high efficiency Efficiency: 40/100 kg/h Cylinder diameter: 1000mm Pressing force: 900 kg/cm2 Maximum briquette length: 60mm Power supply voltage: 400 V Dimensions: 1510 x 1850 x 1170 mm Weight: 770 kg Number of cycles: 7/min Number of cylinders: 3 Pump pressure gauge: electronic Oil level and temperature sensor: in the tank Control: PLC Siemens

Condition: new, The briquette press is designed for pressing all kinds of sawdust and wood chips into briquettes. The design of the briquetting press is compact, handy and produced in Germany. The large oil tank allows continuous use. The briquette press is ready for immediate use - so plug in and go. Todpfx Ajkyza Dsacsd

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: approx. 80 - 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Oil heating 6,374 operating hours Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Extraction unit available as a hopper attachment. Requirements: Ideal input material: chip length less than 25 mm Moisture content: 6–12% ATRO Machine is suitable for intermittent operation, e.g. up to 2 hours briquetting; 1 hour pause, etc. Tedpfxow Hpizj Aaced If the machine is to run continuously for more than 2 hours at a time, an optional cooling system must be connected.

Condition: used, Year of construction: 2023, operating hours: 41 h, functionality: fully functional, machine/vehicle number: 3617, Model/ Type: RUF 15/4000/70 Ma.Nr. / Ma.No.: 3617 Year of construction: 2023 Drive motor: 15 kW Throughput capacity up to max.: 450 kg/h (depending on material) Press pressure: approx. 4000 kg/cm² Briquette size: 70mm Operating hours / Running hours: approx. 41 h Todot Sgrzopfx Aacjd approx. 41 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + Hopper extension with grid / Hopper extension with grid + Elektrische Emulsionspumpe / Electrical emulsion pump + Sprüheinrichtung / Spraying device + Inspection door in hopper / Inspection door in hopper

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Todspfatpopfx Aacjd Weight: 400 kg

Year of construction: 2023, condition: new, Technical data briquetting press: Throughput capacity: 30-60 kg/h The briquetting capacity refers to a bulk density of the starting material of 200 kg/m³! Motor power: 5,5 kW Briquette Ø: 50 mm weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - inspection cover - Transport pipe holder for briquetting press - Inspection window in the container Requirements for the raw material for briquetting: - Moisture content (atro) must be between minimum 6 to maximum 18 %. - Chip length maximum 15 mm - Installation temperature: tempered room at least +5°C - The customer must insure himself against hydraulic oil leakage - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the press tools and / or increased wear can be the result Tjdpfjkuz Tusx Aacsd The screen from the crusher should not exceed a size of 10/12 mm.

Condition: refurbished (used), Year of construction: 1921, functionality: fully functional, briquette diameter: 90 mm, overall weight: 6,000 kg, power: 55 kW (74.78 HP), year of last overhaul: 2025, Complete line with 2 presses in excellent condition! Motor approx. 55 kW, Tsdpfx Ajxdrz Eeacjd Capacity approx. 1,400 kg/h, Press cylinder approx. 90 mm (with or without hole!) Preheated to approx. 60°C (circulating with heat recovery via the oil tank) Cross-cut saw, fully automatic, fully automated saw feed, incl. control cabinet Packaging unit Consisting of: 1 rubber conveyor belt (briquette feed); followed by shrink tunnel system, 400 V, shrink tunnel opening approx. 1,600/600 mm, max. height approx. 200 mm, roller outfeed approx. 3 m Buffer bin (silo approx. 20 m³) for press feeding

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes can be ideally introduced for combustion in wood gasifiers and in smaller wood chip boilers / heating systems. Any material from a wood processing plant (chips, dust, etc.) can be briquetted. Wood chips, sawdust, sawdust etc. accumulate in all craft and industrial enterprises of the wood-processing industry. Enormous storage and transportation costs are claimed for this every day. Briquetting presses offer an ideal solution to this problem, as briquettes, on the other hand, are easy and space-saving to store and transport. In addition, spontaneous combustion is much less. Tjdpfx Aoghgcboacod The briquetting presses require little space, are robustly built and equipped with low-maintenance technology. Whether wood, paper, biomass, foam or polystyrene - the ZBP briquettes any suitable material. With a throughput capacity of up to 35 - 130 kg/h, they are particularly suitable for small and medium-sized companies.

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring Todpfxeu R Sxxe Aaced of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 2017, operating hours: 381 h, functionality: fully functional, machine/vehicle number: 2575, Model/ Type: RUF 18,5/5000/80 Ma.No. / Ma.No.: 2575 Year of construction: 2017 Drive motor: 18.5 kW Throughput capacity up to max.: 550 kg/h (depending on material) Press pressure: approx. 5000 kg/cm² Briquette size: 80mm Operating hours / running hours: approx. 381 hrs. approx. 381 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment Tedet Sfxmspfx Aacjd approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + 600 x 1.000mm Hopper + Elektrische Emulsionspumpe / Electrical emulsion pump + Spraying device + Extractable screw / Extractable screw Speed-controlled pump + Speed-controlled pump

Condition: new, Year of construction: 2023, Capacity: 15 - 55 kg/h Briquette diameter: 55 mm Tank size: octagonal, diameter 750mm Hopper height: Dimension: 1500mm x 900mm x 1065mm (L x W x H) Tjdpfxjk Utqyj Aacjd Motor power: 4 kW Control cabinet: electronically controlled via SPS Weight: 450 kg

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. This machine is designed for high-capacity briquetting, suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory, with all vital parts replaced, all wiring and electrics renewed, and all necessary electrical components updated. The machine is thus in 'as new' condition and comes with a 6-month factory warranty from Di Più. The machine can produce briquettes with or without a hole, diameter from 90mm to 110mm, from soft or hard wood, in round or square shape. The machine can be inspected at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust and other waste materials into wood briquettes. The ideal moisture content of the input material is between 8% and 12%, with particle size between 1 mm and 12 mm. Technical specifications: - Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compaction pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gear reducer: 5.5 kW - Oil pump: 1.5 kW - Oil pump for closing the extrusion head: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil lubrication system for bronze bearings: 100 litres - Briquette output sensor (automatic shut-off when material is depleted) - Protective covers for moving parts - Oil pressure sensor - Control cabinet - Input material hopper (accumulator) - Level sensor for monitoring feed system - Machine weight: approx. 7,800 kg ADDITIONAL: NOVAPAC wrapper Option to purchase a NOVAPAC wrapper, fully compatible with the Di Più BRIK MB100 and other machines, ideal solution for automatic packaging directly after pressing. Year of manufacture: 2013 Tjdpfxewrp Eme Aacsd Price: €19,000 Equipment shown in the last 6 photos.

Condition: as good as new (ex-display), Year of construction: 2024, Machine for sale at a special price Todpfxsd Nnwlo Aacod Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: used, Year of construction: 2009, SECOND-HAND BRIQUETTING MACHINE PRODECO MOD. L70- CE RULES - Briquet diam. 70mm - Production 50-120kg/h - S/N 89 Todjwrddqopfx Aacsd - Year 2009 (CE) - Complete with manual

Condition: used, Year of construction: 2011, functionality: unexamined, briquette diameter: 60 mm, screw conveyor length: 1,200 mm, container length: 20 ft, Briquetting press installed inside a 20” sea container, including vibrating filter. The system is functional but should be serviced by a specialist to ensure continued enjoyment of the system. Tsdpfx Aaswqzdlscsd

Condition: used, Year of construction: 2020, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: 3096, Model/ Type: RUF 15/1700/150x60 Ma.Nr. / Ma.No.: 3096 Year of construction: 2020 Drive motor: 15 kW Throughput capacity up to max.: 500 kg/h (depending on material) Tsdpst Sgtfsfx Aacjd Press pressure: 1700 kg/cm² Briquette format: 150x60mm Operating hours / Running hours: approx. 5,200 h approx. 5,200 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 4 - 8 weeks after receipt of down payment approx. 4 - 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + 600 x 1.000mm Hopper + Elektrische Emulsionspumpe / Electrical emulsion pump + Spraying device / Spraying device

Condition: new, Year of construction: 2025, Performance: 40 and 60 kg/h Automatic start: yes Oil cooler: Yes Briquette size: 50 mm diameter Briquette length: 35 mm Todpfx Aaewhuulecod Container volume: 0.38 m³ Power consumption: 5.5 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: like new (used), Motor power: 5.5 kW Briquette diameter: 60 mm Sawdust level sensor Todpsxcvgvofx Aacjd Operating hours: 1611 h Hopper diameter: 1000 mm Year of manufacture: 1998 CE marking

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net Tedpfx Aajd N Dnhsced The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: new, Year of construction: 2023, Capacity: 15 - 70 kg/h Tsdpsk Utq Dofx Aacod Briquette diameter: 60 mm Automatic run: Yes Oil preheating system: Yes Material humidity: max 15% Tank size: octagonal, diameter 750mm Hopper height: Dimension: 1500mm x 900mm x 1065mm (L x W x H) Motor power: 5,5 kW Control cabinet: electronically controlled via SPS Weight: 450 kg