Used Chaining Routers for sale (2,944)

Condition: like new (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: HB311, 1 Vetter AS8-3.0 column-mounted slewing crane, capacity 800 KG Load capacity at full outreach: 800 KG / 0.8 tons Height: approx. 4 m, upper carriage outreach: approx. 3.67 m Outreach: approx. 3 m, hook height: approx. 3.2 m Base plate: 105 cm Total weight: approx. 900 kg Including 800 kg Demag DC chain hoist (2 lifting speeds) Connection: 400V, 16A, slewing range: 360° Lrodpey Tt Nxefx Afwor The crane is disassembled and immediately available Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition – almost new, see pictures Shipping via freight forwarder or collection by appointment

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: GP189/K312.W7, 1 Vetter wall-mounted slewing crane, 500 KG payload / lifting capacity Type PW5-5.0 Reach approx. 4m, 500KG - 0.5t payload with chain hoist, payload 500KG (2 lifting speeds) Total weight approx. 500 Kg Year of manufacture 1996 Complete with wall bracket, jib, chain hoist, cable carrier, undercarriage, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim Ledpfxoy Uflhs Afworr System is completely disassembled and immediately available Fully functional condition See pictures Shipping via freight forwarder or collection Please inquire about shipping costs based on postal code.

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type PK 2 N Serial No: 2033985 Year of manufacture: 1973 Lrsdpfx Asy E T Dmsfwer Load capacity: 500 kg Hook travel: 15 meters Lifting speed: 5 m/min - 2 fall lines Good condition

Condition: excellent (used), DEMAG Chain Hoist Type PK 2N-F Stock number (1221) Lifting capacity 500 kg Lrsdpfxeyy S Tie Afwsr 2 lifting speeds: 5/1.25 m/min. 380 Volt 2.2 / 1.5 Ampere Lifting height 4.5 meters

Condition: new, functionality: fully functional, Hidromek HMK230 Quick Coupler For high quality quick coupler inquiries, please contact us Lsdjyzad Eopfx Afworr

Condition: reconditioned (used), functionality: fully functional, Used Mafell chain mortiser LS 101 including slotting attachment SE 230 and slotting set 11x230 mm. The chain mortiser has been workshop-tested and is fully functional. An additional, larger support plate with a parallel guide has been mounted on the baseplate of the slotting attachment – not an original Mafell part. However, this can be easily removed. The original parallel guides for the chain mortiser and the slotting device are also included. You will receive an invoice with VAT shown. Payment is made by prepayment (bank transfer) – no PayPal! Collection from the store is, of course, also possible. Shipping is done via UPS. Shipping costs within Germany: €11.90. Lodpfjzc Ed Sex Afworr If you have any questions, please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: CR2358, 1 Carl Stahl wall-mounted slewing crane, 500 kg load capacity / leverage Outreach approx. 3.5 m, 500 kg - 0.5 t load capacity with steel chain hoist, 500 kg load capacity Total weight approx. 250 kg Year of manufacture 1985 Complete with lower wall bracket (upper bolt is connected to the building), jib, chain hoist, cable carrier, carriage, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition See pictures Lsdpozgcixjfx Afwjrr Shipping by freight forwarder or pickup Please inquire about shipping costs based on your postal code.

Condition: used, functionality: unexamined, Contact us for a quote Lrjdeyycihspfx Afwer

Condition: used, Year of construction: 2018, operating hours: 7,453 h, Tracks, excavator Volvo EC 300 CL with GPS air conditioning quick coupler. only 7,453 operating hours very good condition Lredpfjx Amvnsx Afwer

Condition: ready for operation (used), Chain Hoist, Rema Star 111/54, 4 Meters, 3200 kg, Used Machine Manufacturer: Rema Model: Star 111/54 Overall Dimensions: Width: 710 mm Depth: 360 mm Height: 460 mm Electrical Data: 380V; 4.4 kW; 10.5A Lredjxxkw Ijpfx Afwsr Load Capacity: 3200 kg Lifting Height: 4 m Year of Manufacture: 2008

Condition: excellent (used), Year of construction: 1984, machine/vehicle number: RS118/2, Technical data: 1 Zasche / steel ZHD 2000 pillar jib crane NL 2000 KG Payload at full reach 2000 KG / 2 tonne payload Height: approx. 3.5m, UK boom: approx. 2.45m Reach: approx. 3m, hook height: approx. 2.45m Total weight approx. 1000 kg Lsdpsvzkw Defx Afwsrr with steel chain hoist 2000KG Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping by freight forwarder or collection by appointment

Year of construction: 1996, condition: excellent (used), machine/vehicle number: MBMA2021, Technical data: 1 steel column slewing crane NL 250 KG Available 3 times Payload at full radius 250KG payload Height: approx. 3.5m, UK boom: approx. 2.95m Projection: approx. 2.2 m, hook height: approx. 2.5 m Weight completely approx. 350KG with 250kg chain hoist with floor control Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Good condition, see pictures Lrodpfx Aeqwn Ukefwor Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Year of construction: 2024, condition: new, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250Kg) / KD63 motor / DRF200 friction drive Lrsdeq U Iitjpfx Afwor Replacement fan cover / fan cover - not an original part! OEM part number 12481133 Larger quantities are also available - please inquire. NEW, unused Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 2018, functionality: fully functional, Vertical chain shredder / Querstromzerspanner QZ / Kettenmühle 37 KW Suitable for shredding turnings, plastics, PCB, turnings, biomass and many more. Easiliy adjustable grain size Very efficient machine, with just the chain as a shredding tool. Lrjdpfx Afsrrhcpewor Ready to work. Equipped with electric cabinet and synchronizable feeding conveyor.

Condition: new, A mass production washing machine where parts are transported by hanger conveyor and washed by passing through tunnels. Washing is done by spraying or immersion ultrasonic dipping. Working Principle: Parts are transferred by hanging on to the hooks of the top loading conveyor belt. General process cycle: Washing - Rinsing - Optionally Ultrasonic Ledpfx Afjd I E Itjwjrr Immersion Washing - Drying All of the HANGWASHes are tailor-made and have lots of options depending on your needs. Please feel free ot contact with us for further information.

Year of construction: 2009, condition: used, maximum capacity load 5,000 kg *lifting height 15 metres* number of strands 2 load chain 10 x 30 decoiling of hand chain per metre of lifting - 174 m lifting force at nominal load 34daN weight approx. 115 kg Lrsdpfx Afjcw Tyijwsr 1 unit on stock - price per unit  

Condition: new, Steel Frame Automatic Nailing Bridge Lodpfx Aodzc Rxsfwerr A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Year of construction: 2024, condition: refurbished (used), functionality: fully functional, FERAG UTR-JV-KO chain for transporting printed products in the mailroom Ledpfx Aetk S Dyjfwerr UTR-RV, UTR-JV, MSD clamps, LAT clamps, etc. also available...

Condition: used, Year of construction: 2003, Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, Height 500 mm (top edge of rollers) Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Lodpfotug S Dex Afwjrr Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Motor power: 2,5 kW. Lredsdrq Sajpfx Afwor Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 20 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Lrsdpfx Aein Etzsfwsr Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: new, Year of construction: 2026, 1325 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. Ledpfx Afjin Eu Hsworr CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, The Hebrock F 2 Lrsdpfx Aei Am U Djfwor The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: good (used), Complete line available which was producing toffee apples for the leading producer in England. Toffee apples and candy apples were supplied to several leading supermarket chains. Line consists of cooking vessels for the toffee, robotic pick and dip lines to insert the sticks into the apples, pick them up, dip them in the toffee and then place them onto the cooling belt then the products are conveyed into flowwrappers. Videos available upon request. Lodpfx Afspitkkowsrr

Year of construction: 2021, condition: new, machine/vehicle number: (Pitting Attachment) (Milling A, Field of application: Forestry Selling price: € 500, US$ 529,7 Taylor-made router (milling) attachment, pitting attachment Lsdpfx Aen Tm Hwofworr For detailed information, please contact us. Price is representative