Used Chaining Routers for sale (2,819)

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), operation weight: 32,264 kg, Year of construction: 2022, operating hours: 4,950 h, Equipment: UVV, Year of manufacture: 2022 Engine power: 284 hp (208.8 kW) Operating weight approx. 32,265 kg Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Swing speed 9 rpm Max. travel speed 5.2 km/h Rear and side camera LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Engine: Cummins QSL9-C280 engine Water-cooled, 6-cylinder, with common rail injection and Adblue Stage V Power 209 kW / 285 hp; 2100 rpm 1,472 Nm / 1400 rpm Displacement 8,900 ccm Sensor-controlled idle automatic Cyclone pre-filter Hydraulics: State-of-the-art, optimized, demand-flow-controlled hydraulic system (positive flow controlled) Hydraulic load sensing Max. oil flow 2x 280 l/min Max. oil flow AUX1 500 l/min 1st proportional auxiliary control circuit for grab/hammer on joystick 1 2nd proportional auxiliary control circuit on joystick 2 Safety check valves for stick and boom with overload indicator Quick coupler hydraulic circuit, double-acting Adjustable oil flow rate for attachments Adjustable oil pressure for attachments Convenient switching of hammer/shear hydraulics in the display Hydraulic pre-control of the joysticks 10x additional circuit flow rate settings via on-board computer with multi-function monitor Swing brake 2 travel speeds Upper and lower carriage: Boom 6,150 mm, stick 3,200 mm, max. reach 10,870 mm Heavy-duty undercarriage and equipment with wear strips Steel tracks 600 mm Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Rear and side camera Battery main switch Fueling pump with automatic overflow protection Nsdpezaqlijfx Ag Telc Tool compartment Driving alarm and rotating beacon LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Transport dimensions: (L x H x W) 10,667 x 3,225 x 2,990 mm Operator cabin: ROPS Engine emergency stop switch 12V socket Document compartment Radio, Bluetooth-enabled with hands-free function for smartphone with speakers Automatic climate control Heater Tilting front window Large 10" high-resolution touch display Joystick adjustment independent of seat adjustment Floor mat Cup holder Air-suspended seat with fabric cover and seat heating

Condition: good (used), Year of construction: 1996, Motor for light-duty overhead cranes. Hook travel: 3 m Load capacity: 0.4 t Width: approx. 500 mm Height: approx. 300 mm Depth: approx. 300 mm Weight: approx. 25 kg Njdpfoy Urlnsx Ag Tolc Condition: good, second-hand

Condition: used, Year of construction: 2016, operating hours: 9,200 h, Volvo EC 220 EN Year 2016 9200 operating hours Quick coupler 2 buckets 1x GRL 1x TL Piping for hammer/grapple Undercarriage 50% Austrian machine Nsdpfxozc Ddde Ag Tslc 100% service at Volvo ---- German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We are happy to assist with your financing or leasing EU sale: net prices after submission of company documents and VAT number VAT deposit: €2000 Our services for you: - Customs license plates - Export papers and EUR1 - Worldwide transport - Overnight accommodation options - Transfer from Munich Airport or Passau Train Station

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain Nledjd Tih Rspfx Ag Tsc -Chain length: 10 m -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions 1200/1000/100 mm -Weight: 176.5 kg

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain Nlsdpod Tih Tefx Ag Tec -Chain length: 9600 mm -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions: 1140/920/100 mm -Weight: 166.5 kg

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10.4 m Nljdsd Tih Njpfx Ag Tjc -Pitch: 200 mm -Intermediate dimension: 48 mm -Price: per piece -Number: 2 pieces -Dimensions: 1140/960/100 mm -Weight: 180 kg/piece

Condition: used, Year of construction: 2020, operating hours: 5,000 h, * Liebherr R920 Compact LC tracked excavator * Year of manufacture: 2020 * 4,990 operating hours * 22,400 kg * 110 kW * OQ65 fully hydraulic quick coupler * Variable-geometry boom * Blade * Central lubrication system * Refueling pump * Air conditioning * 3 m undercarriage width * 75 cm track pads * 180° camera * Undercarriage in very good condition Nodpfx Ajzbwn Hjg Tjlc * Maintained according to service schedule

Year of construction: 2019, condition: new, GOMA GS-900 Router Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Cost of delivery Customer cover Startup Type to be agreed Description Comments Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm Nlodpfxefbl Eps Ag Tec The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: NOH138, Technical specifications: 1 Vetter PS1,25-4.0 pillar jib crane, rated load 125 kg Load capacity at full outreach: 125 kg Height: approx. 3.2 m, underside of jib: approx. 2.52 m Outreach: approx. 4 m, hook height: approx. 2 m Total weight: approx. 450 kg Fitted with newer 125 kg Abus chain hoist (year built: 2022) (2 lifting speeds) Connection: 400V 16A, slewing range 360° Crane is dismantled and immediately available Nlsdox A Sa Espfx Ag Tjc Item location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see photos Shipping by forwarding agent or collection by appointment

Condition: used, Year of construction: 2015, operating hours: 6,390 h, CAT 311FLRR excavator from year 2015 with only 6,390 operating hours! ---- * Manufacturer: CAT * Model: 311FL RR * Year of manufacture: 2015 * Displayed operating hours: approx. 6,390 * Last service at approx. 5,960 hours * Includes hydraulic quick coupler CW20 * Includes hydraulic ditch cleaning bucket * German machine * 1st owner * Rubber pads * Blade * Air conditioning * Rear view camera * Piped for attachments * Good condition! * Undercarriage: approx. 40-50% * More photos and video available on request (WhatsApp ERIK) * Price: €47,900 net + 19% VAT. ---- For further questions please call: Erik Kortum: WhatsApp All information subject to change and prior sale. No guarantee or liability for errors. Nljdpey Sdlzjfx Ag Tjc

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: GP58 Katzfahrt, 1 Vetter wall-mounted slewing crane, 500 kg load capacity / lifting capacity Type PW2.5-4.0 Reach approx. 4m, 500 kg - 0.5t load capacity with chain hoist, 500 kg load capacity (2 lifting speeds and trolley drive) Total weight approx. 350 kg Year of manufacture 1999, Abus chain hoist from year 2007 Complete with wall bracket, boom, chain hoist, cable carrier, carriage, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition Nlodpoy Ugb Dofx Ag Tec See pictures Shipping by freight forwarder or collection Please inquire about shipping costs based on your postal code.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: GP188?, 1 Vetter wall-mounted slewing crane, 500 kg payload / lifting capacity Type PW5-5.0 Reach approx. 4m, 500 kg payload (0.5 tons) with chain hoist, 500 kg payload (2 lifting speeds) Total weight approx. 350 kg Year of manufacture 1996 Nlsdjy Ugbwopfx Ag Toc Complete with wall bracket, jib, chain hoist, cable carrier, chassis, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition See pictures Shipping via freight forwarder or collection Please inquire about shipping costs based on your postal code.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: GP189/K312.W7, 1 Vetter wall-mounted slewing crane, 500 KG payload / lifting capacity Type PW5-5.0 Reach approx. 4m, 500KG - 0.5t payload with chain hoist, payload 500KG (2 lifting speeds) Total weight approx. 500 Kg Year of manufacture 1996 Complete with wall bracket, jib, chain hoist, cable carrier, undercarriage, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition See pictures Shipping via freight forwarder or collection Njdjy Uflhepfx Ag Tslc Please inquire about shipping costs based on postal code.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: HZ379, 1 Vetter US1.25-4.9 Column-swivel crane, NL 125 KG Load capacity at full extension: 125 KG / 0.125 tons Nodpfx Aey Udp Ejg Telc Height: approx. 4.4 m, upper carriage boom: approx. 3.62 m Reach: approx. 4.9 m, hook height: approx. 3.2 m Base plate: 55 cm Total weight: approx. 400 kg Including 125 kg Demag DC chain hoist (2 lifting speeds) Connection to 400V 16A, swivel range: 360° Crane is disassembled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost like new, see pictures Shipping via freight forwarder or collection by appointment

Year of construction: 1991, condition: as good as new (ex-display), machine/vehicle number: Mü0136, Technical data: 1 Demag KBK column slewing crane NL 2x 250KG with 2 booms Nlsdpsqmillefx Ag Toc Payload at full radius 2x 250KG / 0.25ton payload Height: approx. 4.23m, UK boom: approx. 3.75 + 3.2m Projection: approx. 2+3m, hook height: approx. 3.3m + 2.75m Weight completely approx. 700 KG with 2x 250Kg Demag PK chain hoist with floor control Connection to 400V 16A, swivel range 2x 270° Crane is dismantled and packed on a pallet Good condition, see pictures Location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Condition: used, Year of construction: 2016, operating hours: 9,412 h, Equipment: all wheel drive, * CAT 325 FL CR short tail excavator * Year of manufacture: 2016 * Operating hours: 9,400 h * Weight: 25,000 kg Njdpfoyum I Aox Ag Telc * Rubber pads * Quick coupler * 1 x hydraulic clamshell bucket * More pictures and videos available via WhatsApp * Information provided without guarantee; subject to prior sale.

Condition: new, Year of construction: 2026, Router CNC2030 ATC 4 axes, tilting spindle +/- 90 degrees working area 2100 x 3000 [mm] The ATC series of plotters was created for professional use in large industrial plants and factories. These machines are designed to process a wide range of materials. In order to meet the demands of heavier machining, the ATC machines feature an additionally reinforced construction and more powerful AC servo drives on each axis. A vacuum work table is standard on these machines. It is also possible to install a hybrid table. Plotters in this series are equipped as standard with automatic tool changing, a six-position linear magazine and a tool height sensor. The solutions used significantly speed up the machining process requiring the use of several cutters. Materials to be machined: wood wood-based materials (chipboard, MDF, OSB, etc.) plastics composites PVC non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The structure of the machine tool is made of steel and cast iron which gives it high rigidity, as well as resistance to the overloads associated with the machining process. WORKING SURFACE: The usable area of our machine tool is 2100 x 3000 [mm]. MATERIAL CLAMPING: The machine is equipped with a vacuum table. It is possible to install a hybrid or T-table. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 300 [mm] as standard (can be increased). Nledpfx Aeirfaveg Tec DRIVES: SERVO motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes are driven using classic and proven helical rollers to ensure long service life and precision, while the Z axis is driven using a high-performance ball screw. All axes move on rail guides.... SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. The power supply is provided by an inverter, which has more power than the spindle, which protects against speed drops when operating under heavy load. TOOL STORAGE: The machine tool comes standard with a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine has been supplied with the appropriate CAD/CAM software in its latest version. The software makes it possible to design parts quickly and easily, which the programme then converts into so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is controlled by a controller, which has its own processor and operating memory to ensure stable and reliable operation. The machine controller is equipped with active vector analysis functions, so that operation of the machine is smooth and there is little overshoot during processing. The controller has a recovery function to continue operation after a power loss, so there is no need to initialise the programme from scratch. The controller's on-board memory allows the machine to work without having to load the programme each time.

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. Nlodpsiq U Tqofx Ag Tsc The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: good (used), Year of construction: 2011, Electric chain hoist, crane, overhead crane, assembly crane Nsdsx E Sq Eepfx Ag Tjlc -Manufacturer: Yale, electric chain hoist -Type CPE 75-1.6 Load capacity 7500 kg -Main stroke: 1.6 m/min -Chain length: 9 m -Transport dimensions: 1200/800/H520 mm -Weight: 235 kg

Condition: used, Year of construction: 2010, operating hours: 3,000 h, * Volvo EC 180 CL * Crawler excavator * Year of manufacture: 2010 Nlsdpfeydharsx Ag Tsc * Quick coupler * 3 buckets

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type PK 2 N Serial No: 2033985 Year of manufacture: 1973 Nledpfx Agsy E T Dmo Toc Load capacity: 500 kg Hook travel: 15 meters Lifting speed: 5 m/min - 2 fall lines Good condition

Condition: excellent (used), I am offering a professional lifting chain sling from the renowned brand McBULL, designed for use in demanding industrial environments. This set is ideal for: cranes gantry cranes forklifts construction and transport operations Njdpfx Ajyxtdysg Tjlc The equipment is fully functional, used – shows normal signs of wear with no damage affecting operation. ⚙️ Technical specifications chain diameter: 20 mm length: approx. 4 m working load limit: 12,500 kg 17,000 kg (depending on configuration) type: chain sling hooks: with safety latch manufacturer: McBULL condition: used, functional, tested ✅ Technical condition no cracks or deformation of chain links hooks functional, safety latches working correctly markings are clear ready for use 📦 Includes chain sling(s) as shown in the photos hooks with safety latch

Year of construction: 2024, condition: new, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250Kg) / KD63 motor / DRF200 friction drive Replacement fan cover / fan cover - not an original part! OEM part number 12481133 Larger quantities are also available - please inquire. Nljdpfx Asq U Iiteg Toc NEW, unused Item location is 75053 Gondelsheim See pictures

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH373-27, 1 Vetter / Demag wall-mounted slewing crane, 250 KG capacity / lifting load Type UW2.5-6.0 Slewing radius approx. 6m, 250KG / 0.25t capacity With chain hoist, 250KG lifting capacity (2 lifting speeds) Total weight approx. 250 kg Year of manufacture 2004, with inspection logbook Complete with wall bracket, jib arm, chain hoist, cable festoon, trolley, and small parts Slewing range approx. 180° Nledpfoxz Tqpjx Ag Tec Item location: 75053 Gondelsheim Unit is fully dismantled and immediately available See pictures Shipping by freight or pick-up Please request shipping costs according to postal code

Condition: like new (used), Year of construction: 2026, Scraper chain conveyor Drive with gear motor Steel conveyor chains Plastic carriers Nodey Rfbbjpfx Ag Tjlc