Used Cnc Drilling Machine for sale (65,525)

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Godeyybpmspfx Af Toua Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm Gjdpfxoy Aa H No Af Teua turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm Gedpjvd Dftjfx Af Toua height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2002, 5-axis CNC machining centre Manufacturer: AXA Machine model: VPC 50 U Control system: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Portal construction TECHNICAL DATA Travels - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle – swivelling spindle Gedpfx Afeyz R Hdo Tsua - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size fixed table L x W: (mm) 1,100 x 1,100 - Table diameter built-in rotary table: (mm) 1,100 x 1,100 Modifications and errors in the technical data and information excepted.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC640, spindle speed (max.): 10,000 rpm, We offer in good condition with around 2.500 spindle hours Posmill CE1000 with following options: Heidenhain linear scales in X, Y and Z-axis Heidenhain TNC 640 control Air true spindel Spindel 10.000 RPM ISO40 Tool changer 40 tools ATC Belt filter with Internal coolant 20 bar Hexagon Touch probe Hexagon tool probe Chip conveyor Thermal spindel compensation Z-axis Gedpfxoyindao Af Teua Technical specification:" X-Axis Travel: 1060 mm Y-Axis Travel: 600 mm Z-Axis Travel: 600 mm Machine is within new tolerence and geometry protocol is available.

Condition: used, Used pillar drilling machine from Ixion Gsdpshcr I Esfx Af Toua speed range 400-3000 rpm Mk2 holder drilling capacity up to max. 18mm

Year of construction: 1965, condition: used, Drilling diameter 30 mm total power requirement 0,74 kW Machine weight approx. 0.35 t drilling capacity in steel (diameter) 30 mm throat 300 mm drilling stroke 120 mm mounting MK 3 table surface 335 x 280 mm groove width 14 mm table adjustable in height 510 mm distance spindle/table max. 120 - 630 mm Gujdsm Sg Tbjpfx Af Toa column base area 380 x 400 mm distance spindle / base plate 1160 mm Speed range - drilling 200 - 2500 rpm speed steps working spindle 4 column diameter 100 mm machined base plate: Yes table rotation approx. 180 ° space requirement approx. 0,9 x 0,4 x 1,9 m Control conventional

Condition: like new (used), Technical Specifications Guodpfx Asvzgm Isf Tja Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 170 mm Spindle mounting MK: 3 Speed range: Table size: 570 x 480 mm Total power requirement: 1.6 kW Weight: 650 kg Dimensions: 1200 x 800 x 2200 mm

Year of construction: 1990, condition: good (used), REFORM RB32-10 radial arm drilling machine drilling capacity 32 mm MK 4 holder throat 1000 mm quill stroke 280 mm drive power 3 kw spindle speed 22 - 2000 rpm Weight 2 to Guedpfxem Sg R Ds Af Toa

Condition: like new (used), Gillardon pillar drilling machine, type GB 30 V, speed 60 - 1800 rpm, automatic feed, very good condition, tool holder MK 3. Gujdexpxbcopfx Af Tea

Condition: good (used), Breda radial drilling machine Type R 1220 MP 400 Volt, 3 kW Spindle taper MK 5 Arm length 1250 mm Speed 30–1200 rpm Guodpfxjx Rt Ezs Af Tja with swiveling table

Year of construction: 1985, condition: good (used), Bench drill TB 15 spindle speed 360 - 3600 rpm via V-belt pulley spindle mounting MK 2 with intermediate table Strohm 400 Volt Gsdsk D Hrdjpfx Af Tsua

Condition: used, Kolb radial drilling machine MK 5 boom 1500 mm with clamping table Gedpfx Aoulz Iwof Toua

Condition: good (used), Year of construction: 1964, Radial drilling machine make Raboma 12 UH 1600 MK with Morse taper mount, cube table, and many accessories Gujdpfx Aoxcf Hfjf Tsa

Condition: excellent (used), Year of construction: 1976, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Gusdpfewg Hdvjx Af Tea Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1976 With coolant system!

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Gjdpfx Aex U Ectsf Toua Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: good (used), Gillardon GSB 20 pillar drilling machine Drilling capacity in steel (diameter) 20 mm Gjdpfsm Sg S Nsx Af Toua throat 260 mm Drilling stroke 115 mm

Condition: good (used), FLOTT E-3 pillar drill throat 260 mm Bore 125 mm stroke Godpfx Ajric Tbsf Tjua Speed: 125 -2500 Clamping table diameter 420x340 mm Column diameter 110 mm Tool holder MK3

Condition: like new (used), Year of construction: 2012, Machine is completly refurbished by our technical staff Gusdoxn T Smopfx Af Toa

Condition: good (used), Year of construction: 1994, functionality: fully functional, rotational speed (max.): 2,900 rpm, rotational speed (min.): 110 rpm, For sale is an Alzmetall column drill press in good used condition, as shown in the photos. Technical specifications: • Manufacturer: Alzmetall • Model: AB3-ESV • Speed: approx. 110–2,900 rpm Gedsy Aggijpfx Af Tsua • With tapping function • Quill stroke: approx. 180 mm • Feed rates: 0.1/0.2/0.3 mm/rev • Year of manufacture: 1994 • Weight: approx. 450 kg • Condition: Used, in working order Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, loaded free of charge. Subject to errors in technical data and prior sale.

Condition: good (used), Year of construction: 2018, Ref. -No.: 10643 Manufacturer: FERMAT Type: Gantry Gujdpfx Aeyzpxfjf Tsa Year of construction: 2018 Type of control: CNC Control: Siemens Sinumeric Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 20000 mm Y-Travel: 7800 mm Z-Travel: 2000 mm W-Travel: 1000 mm Turning Speeds: 20000 RPM Speed work spindle: 0 - RPM Max. Torque: 3294 Nm Rapid Traverse X/Y/Z: 40000 m / min Table-Size (Lxw): 20000 x 5000 x 300 mm Power Capacity: 74 kW Headstock - (spindle diameter): 160 mm Further information: - Tool cooling - Low pressure - Tool cooling - High pressure 50 bar (6,000 liters) - Tool cooling - Oil separator - Sludge pump - Machine enclosure (CE) - Electrical - Linear measurement - Electrical - Remote diagnostics - ATC/Robot Robot 140 - Chip conveyor 2 - Operator cabin / protective screen - Electrical - HH iTNC 640 control system - Electrical - Handwheel - Electrical - Air conditioning for the distributor - Head - Type 2x UHA 0.001 The machine can be viewed while powered on by prior arrangement.

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40 Gsdpfxjy Alrws Af Tjua

Condition: ready for operation (used), Year of construction: 1997, Immediately available from toolmaking: CNC Vertical Machining Center Hedelius Model BC 40 D/20 Guodpey Alrqofx Af Tsa Year of manufacture 1997 Siemens Sinumerik 840 D 4th axis Table 2 x 1100 x 420 mm Pendulum machining possible Table load 500 kg Travel X/Y/Z 1700/400/400 mm SK 40 20-position tool magazine Spindle speeds 30 – 6,000 rpm Rapid traverse on all axes 30 m/min Drive power 20 kW Weight 7 t Price: EUR 9,500 excl. VAT, ex location

Condition: ready for operation (used), Year of construction: 1981, Immediately available from toolmaking in Switzerland: High-speed radial drilling machine HKS Model HKS 40 Year of manufacture: 1981 Morse taper 4 Gusdsy Alqgepfx Af Toa Drilling capacity: 40 mm Arm reach: 1120 mm Mounting height: 780 mm Table size: 1520 x 560 mm 3-axis digital readout for table adjustment Spindle drive power: 3.8 kW Spindle speeds: 26 – 1940 rpm Quill stroke: 200 mm Feeds: 0.05 – 0.45 mm/min Thread cutting device Coolant system Total drive power: 6.5 kW Hydraulic vice Weight: 2600 kg Price: 2,000 EUR plus VAT ex works

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Godpfsy Alppox Af Tjua Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location