Used Coating for sale (2,396)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V. Gedpfx Ajwzl Hxob Ueuk

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 430/16, Powder Coating Line (Pass-through Polymerization Oven for Powder Paint, complete with Conveyor System and Dual Paint Booth) Basic technical data of the oven: - Max. external dimensions (L x W x H): 9.6 m x 6.6 m x 2.5 m - Weight: approx. 9,000 kg - Max. operating temperature: 220°C - Max. burner power / GZ50/: 2 x 160 kW - Fan motor power: 24 kW - Power supply: 3 x 400 V +N +PE, 50Hz Maximum workpiece dimensions: - L = 2.0 m - H = 1.0 m - W = 0.6 m Included with the machine: Gusdpfxsu Hib Ns Ab Ujk Complete technical documentation + parts lists. The oven is integrated with an overhead conveyor system by JOKŚ. The conveyor system includes 42 m of tracks, along with a drive system and lubrication system; control system with speed regulation in the range of 0.5–1.5 m/min. APAR AR200 speed recorder, LG iG5A series inverter, EATON MFD-AC-CP4 manual power/communication module, MFD-CP4, MFD-80. Manual powder coating booth; pass-through, two-station. Paint access windows on opposite sides, offset. Max. dimension of painted workpiece: - L = 2.0 m - H = 1.0 m - W = 0.6 m A linear overhead transport system runs through the center of the booth. The booth includes 3 tanks adapted for powder recovery/color change, filtration system based on cartridge filters. End tanks equipped with screens.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h Gujdpowfgbrsfx Ab Ujk ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Price includes shipping within Germany – No additional shipping costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN SO EASY! Want to expand your business and enter the world of professional powder coating? PEF2.5+ is the perfect solution for beginners! This powerful system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨THE UNBEATABLE OFFER – ONLY UNTIL THE END OF MAY!✨ Instead of €38,500, now for only €31,900 PLUS VAT. Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – IMPRESSIVE QUALITY! ✅ Plug & Play system – Delivered fully assembled, ready to use! ✅ 100% European manufacturing – Not made in China, but the highest quality according to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden additional costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Gsdpfxewfhu Ho Ab Uouk ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder furnace + powder booth + powder gun Complete starter kit PEF2.5+ ⭐ Powder furnace with electric heating ✔️WIDTH (INTERNAL): 1,505mm ✔️HEIGHT: 1,800mm (from the air duct) ✔️LENGTH (INTERNAL): 2,500mm ✔️The thermoblock unit measures 785x1800x2210mm, the heating output is 30 kW/h, and a circulation fan is included. 1.5 kW/h-1 pc., one exhaust fan is 0.54 kW/h. ✔️ Double-leaf door with thermal insulation and silicone seal. ✔️ Guide rails for trolleys are manufactured in the dimensions indicated on the floor panels. ✔️ Specially designed air duct ensures even air distribution in the curing oven. ✔️ The electrical switchgear is made of Siemens and Schineider. This curing oven does not have a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and light signal sounds from the buzzer. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder Booth ✔️DIMENSIONS: 800x1930x2200mm (dimensions including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter extractor fans: 4kW x 1 pc. (6,000m3/h – 200mm SS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for controlling air intake and pressure blasting ✔️ DELTA frequency converter ✔️ Heavy-duty casters under the paint booth. ✔️ An additional filter is located at the fan outlet. ⭐ E-Coat+3 Master powder coating gun with multicolor (vibration table) Request now – Make your business fit for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certifications for all our machines and ATEX certifications for the necessary machines.☀️

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, Pony 7000 Sales Price List Paint booth 7 x 4 x 3 meters • Reinforced partial grating 5 mm • Height 3 meters (Sprinter height) • 2 x 7.5 kW motors (belt drive) • ATEX ceiling lighting • 24,000 m³/h • Incl. 2 drive-on ramps for above-floor version • Above-floor and in-ground version at same base price Base price: €28,900 Base price for 2.76 meter height version minus €1,000 (passenger car height) Base price for 3.5 meter height version plus €1,000 (motorhome height) Door-in-door system: €1,800 Guedpfewzmcbsx Ab Uek Double glazed doors: €1,800 11 kW motor incl. larger fans and enhanced control cabinet with direct drive: €7,770 15 kW motor incl. larger fans and enhanced control cabinet with direct drive: €8,610 Side lighting: €2,870 Ceiling lighting EX protection according to ATEX: €1,470 Full light-duty grating: €1,785 Full heavy-duty grating, reinforced 5 mm: €2,990 Direct drive with PLC control for 11 kW motors (incl. soft start): €15,120 Direct drive with PLC control for 15 kW motors (incl. soft start): €17,640 Soft start for 7.5 kW motor (belt drive only): €1,239 PLC control for 7.5 kW 24k m³/h motors with 3-stage energy saving program: €5,670 PLC control for 11 kW 30k m³/h motors with 3-stage energy saving program: €7,770 PLC control for 15 kW 30k m³/h motors with 3-stage energy saving program: €8,610 PLC control for 2 x 5.5 kW 36k m³/h (belt drive) motors with 3-stage energy saving program: €5,565 Pneumatic drive-on ramp: €4,900 Grating modification for lift: €1,785 Pass-through system with double gates (without door-in-door): €3,250 Tri Axis ramp: €7,980 Second service door (position freely selectable): €1,150 Info: 11 kW motor set at 1,200 rpm (inverter) (1,000 rpm motor) achieves 36,000 m³/h

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Guodpfjxa H Ewsx Ab Uok It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems Guodpfx Aboxa Hzxj Uok If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Gusdpfxjxa Hx Ro Ab Uok Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,400 mm, total height: 2,210 mm, total width: 1,505 mm, type of input current: three-phase, warranty duration: 24 months, temperature: 250 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, Equipment: emergency stop, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ PEF-2.5 ELECTRIC POWDER FIRING OVEN WIDTH (INTERIOR): 1,505 mm HEIGHT: 1,800 mm (from the air duct) LENGTH (INTERIOR): 2,500 mm ➢ The thermoblock unit measures 785 x 1,800 x 2,210 mm. The heating capacity is 30 kW/h. A circulating fan is 1.5 kW/h (1 pc.), and an exhaust fan is 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails are manufactured for trolleys in the dimensions indicated on the floor panels. ➢ Specially designed air duct ensures uniform air distribution in the curing oven. ➢ The electrical switchgear is made of Siemens and Schineider. This curing oven does not have a PLC system. PLC is available as an option. ➢ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and light signal is emitted by the buzzer. ➢ Additionally, a product transport cart with cast wheels is located inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200mm (dimensions including fan) ➢ Teflon filters: 4 pcs. ➢ Filter suction fans: 4 kW x 1 pc. (6,000 m3/h – 200 mm SS) ➢ 36 W LED lighting x 1 pc. ➢ Bottom drawer x 1 pc. ➢ Control panel for controlling air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty rollers under the paint booth. ➢ An additional filter is located at the fan outlet. ♨️ Ramp heating mode (optional) Precisely control temperature progression and dwell times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! Gsdpfxowdtfue Ab Uouk The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2025, total height: 982 mm, total length: 4,000 mm, total width: 1,100 mm, volume flow: 18,000 m³/h, warranty duration: 12 months, Extraction wall with 18,000 m3/h Max. power consumption 5 kW/h Electric motor 4 kW Gsdpfx Aswz Ic Nob Usuk Air unit 18,000 m3/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Condition: excellent (used), Soest Roller Coating Machine for Oxidative Oil , Hardwax Oil , Laquer and Stain , with Polishing Line 2 pads and 2 Brushes Gsdpfjxqh Ibex Ab Uouk

Condition: good (used), Paint roller machine, roller coating machine, powder coating system -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg Godogal Agjpfx Ab Ujuk

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 986U042310279, Size B2, water-based coating unit for digital finishing, corona unit, high capacity feeder, high capacity stacker. Machine can be installed inline with an HP Indigo 12000 or 15000. Godpfx Abox Apdnj Uouk

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. * Technical data will follow shortly * For self-dismantling and collection. Gujdolf H Tcepfx Ab Ujk

Condition: excellent (used), Precious chocolates coating drum Guodsl E El Ispfx Ab Uek Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Condition: excellent (used), COTEC Type: HCS 100 P-UH COTEC HCS 100 P-UH – Hydrophobic Coating System / PVD Unit For sale is a COTEC HCS 100 P-UH, a fully automatic hydrophobic coating system for industrial applications. The unit is ideal for producing high-quality, abrasion-resistant, and transparent hydrophobic and oleophobic coatings on glass, plastic, or metal. Fields of application: Guodew Tbvrepfx Ab Uek • Optics (e.g., eyeglass lenses, precision optics) • Display and electronics industry • Medical technology • Automotive and supplier industry • Consumer goods and decorative surfaces Technical data & features: Model: COTEC HCS 100 P-UH Process duration: approx. 12 minutes per batch Capacity: up to 110 substrates Ø 70 mm (2 racks) Internal chamber: Ø 600 × 540 mm Heatable chamber up to 65 °C Fully automatic process control (PLC) with 19'' operator panel Vacuum system with integrated evaporator for DURALON materials Uniform coating, even on complex 3D geometries No post-treatment required Weight: approx. 300 kg Condition: used Scope of supply: (See image) (Subject to change and error in technical data and information!) For further questions, we are happy to assist you by phone.

Year of construction: 2022, condition: new, Model KPO-3 Booth Type Open Worksize dimensions 2800 width x 2200 height x 1000 depth Overall dimensions 2800 width x 2300 height x 1700 depth Weight 550kg Power supply Electric Gujdpebuyr Tsfx Ab Ujk Nominal power 0,69kW x2 Voltage 380V Frequency 50-60Hz Filters Polyester Filters count 3 Filters hang type Bagnet type, easy on/off Filter area 22,5m2 Filter cleaning system Pneumatic - Jet Venturi Ventilator type Aluminium ray rotor 2pcs. Loudness 74dBa Air consumption 10,200m3/h Warranty 12 months

Condition: used, Year of construction: 2014, ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Content of the facility ►1 piece - Gas-heated large powder furnace ►1 piece - Automatic powder coating booth ►1 Piece - Electrically Heated Small Powder Furnace ►1 piece - Manual monocyclone powder coating booth ►1 piece - room type monocyclone manual powder coating booth ►1 piece - Automatic chemical pre-treatment and drying system ►6 pieces - Automatic powder coating gun ►3 Pcs - Manual Powder Coating Gun ►1 piece - Automatic powder recovery unit ►5 pieces - monocyclone ►1 piece - Automatic control panel ►1 Piece - Automatic Rod Movement System Speed ​​Controlled ►2 Pieces - Movable Platform Speed ​​Controlled ►12 pieces - parking station ►300 m - conveyor rail ►12 pieces - hanging rods Gusdpfeiivq Uex Ab Ujk Our facility is located at Anhaltstrasse 30, 14943 Luckenwalde. You can make an appointment to view the machines. The system has been in use for 8 years. Since we are the direct manufacturer of the plant, we can make the changes you want to the machines by mutual agreement. It does not fit into your existing assembly space? Then we can make changes to the layout. Please check the system PDF file using the link below.

Condition: excellent (used), Precious chocolates coating drum Godpsl E Eizofx Ab Ueuk Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Condition: excellent (used), Here we offer you a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances of < 40 % of the lower explosion limit (LEL). Gjdpfohv Ru Ssx Ab Uouk Highest temperature of the heating surface above 750 °C Equipment description: Technical data: Interior (usable space) 0.216 m3 Inner dimensions: width 600 mm height 600 mm depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Roller conveyor total 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Recirculation air volume flow increased 33 m3/h Total steam space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Over-temperature limit controller (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60Hz Rated current 12.0 A Rated power 6.0 kW Connected load 7.0 kW Weight: 275kg Type: LTU 60/60 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2019, condition: new, Powder coating machine Mini - for beginners The Spark / ROMER® powder coating plant Mini - consists of: Powder oven SLS-9 small Guedpfx Aectx Ireb Ujk (inside: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 Delivery time: approx. 12 to 16 weeks after ordering Shipping costs will be calculated individually. ( also self collection ) In order to offer you a detailed quotation for a system tailored to your application, further details regarding the application and the batch would be necessary. We will then immediately prepare an offer for a suitable plant in the dimensions according to your request. Payment terms: 30% deposit and the 70% balance upon notification of readiness for shipment.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ Shipping provided : 35-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ Complete Starter Pack - MiniPB €25,126 EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ Powder Curing oven + Powder Coating Booth + Powder Coating spraygun Includes everything you need to coat small parts such as Rims needed: - ELECLINE 12-1519 CURING OVEN (electr.) - BOOTHLINE-1200 FL SPRAY CABIN (with filter) - STRONG SMART MULTICOLOR POWDER COATING EQUIPMENT WITH SPARE PARTS - TRANSPORT TROLLEY FOR CURING FURNACE ⭐ Powder oven with electric heating - ELECLINE 12-1519 ✔️ Internal dimensions: 1500 mm L * 1200 mm W * 1570 mm H ✔️ Volume: 2.9m³ ✔️ Electrical heating power: 18 Kw/h ✔️ Circulating air flow rate (fan) : 3,300 [M³/H] ✔️ Power of the circulating air fan: 0.75 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ⭐ Powder Coating booth – BOOTHLINE1200 - FL ✔️ Internal dimensions: 1130 mm L * 1250 mm W * 1450 mm H ✔️ 2 Flanged polyester filter ✔️ Ø325*1000mm filter dimensions. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder coating collection drawer ✔️ 360 degree rotatable and movable hanging device. ✔️ 1 PC 2.2 KW suction fan - 4500 m3/h ⭐ Powder Coating Gun - STRONG SMART MULTICOLOR Coat effortlessly with all powder colors, coat complex geometries with outstanding efficiency and quality, and do it in the most challenging environments. This paint gun set has a body with a stronger and more stable structure. Do you want a special configuration ❗ Call us now❗ ✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅ ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ Gedpfed S Nd Dex Ab Ueuk ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Godpfxsun Rr Rj Ab Ueuk Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2019, condition: new, Booth KPZ-4P • Booth Type Closed drive-thru • Worksize dimensions 3500 width x 1800 height x 1000 depth • Overall dimensions 3300width x 2300 height x 1800 depth Gjdpfjbxmfnex Ab Ujuk • Power supply Electric • Nominal power 0,69kW x4 • Voltage 380V • Frequency 50-60Hz • Filters 100% Polyester • Filters count 4 • Filters hang type Bagnet type, easy on/off • Filter area 30m2 • Filter cleaning system Pneumatic - Jet Venturi • Ventilator type Aluminium ray rotor . • Air consumption 20,400m3/h • Loudness 74dBa • Doors Double, both side • Inside drive diameter 800mm

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Gjdpfx Aboun Rrqs Ueuk Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.