Used Coating for sale (2,621)

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: Gkodpfx Akszgci Eohjd 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. Gksdpfozd Axbex Akhod The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Atlas Xenon Weather-Ometer / Weathering Test Device Atlas Ci3000+ Xenon Weather-Ometer Xenon test device for artificial weathering and light aging For sale is a used Xenon Weather-Ometer from Atlas Material Testing Technology LLC. The device is suitable for weathering tests, light aging, material testing, quality control, research and development, as well as aging tests for plastics, paints, coatings, and materials. Technical data Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Gkedpfx Akjzf D Rnehed Device type: Xenon Weather-Ometer / Weathering Test Device Year of manufacture: 12/2010 Light source: Xenon arc lamp Lamp rated power: 4,500 W Operating range Xenon lamp: 1,700 – 4,500 W Device model according to display: Ci3000+ W Sample sensor 1: Black standard Sample sensor 2: Black panel Light sensor 1: CI 300 – 400 nm Light sensor 2: CI 420 nm Mains connection: 220 / 380 V Frequency: 50 Hz Connection type: 3/N/PE Rated current: 50 A Power consumption: 9.5 kW Control voltage: 24 VDC Compressed air supply required Operating pressure: 80 – 100 PSI (552 – 689 kPa) Compressed air consumption: approx. 4 CFM (0.11 m³/min) Dimensions: approx. 950 x 730 x 1830 mm (W x D x H) Required footprint: approx. 1050 x 2030 mm (W x D) Weight: approx. 404 kg Minimum distance exhaust hood: approx. 102 mm to 152 mm Equipment Touchscreen control panel Xenon burner Test chamber with sample rack Black standard sensor Black panel sensor CI 300 – 400 nm light sensor CI 420 nm light sensor Water-cooled lamp system Exhaust connection Interface connections Integrated humidification system Documentation / Documents as shown in the pictures Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Documentation as shown in the pictures Accessories as shown in the pictures Areas of application Artificial weathering Light aging testing UV and Xenon testing Material testing Plastic testing Paint and coating testing Colors and pigments Textiles Packaging Automotive industry Construction and materials testing Quality assurance Research and development Condition Used Good optical condition Optical condition as shown in the pictures Scope of delivery 1x Atlas Ci3000+ Xenon Weather-Ometer Available accessories as shown in the pictures Available documentation as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight shipping possible. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has only been operated with argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser on-time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was in early 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during a running job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Gksdpfxozhlr Ej Akhjd Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See image) SLM 280 machine Control cabinet Process chamber Internal control panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Gkjdpjzg Er Ajfx Akhsd Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, H. Köhler KG Kesternich Testing Device / Corrosion Test Chamber H. Köhler HK 320 BF Kesternich Testing Device Corrosion test chamber for SO₂ corrosion tests For sale is a used corrosion testing device from the manufacturer H. Köhler KG. The device is used for carrying out Kesternich tests under a sulfur dioxide-containing atmosphere and is suitable for corrosion investigations on materials, surfaces, and coatings. Technical data Godpfx Akszclxvshjkd Manufacturer: H. Köhler KG Type: HK 320 BF Device type: Kesternich testing device / corrosion test chamber Test chamber volume: approx. 300 liters Internal dimensions: approx. 725 x 500 x 750 mm External dimensions: approx. 1070 x 570 x 1970 mm Temperature range: RT +5 °C to 60 °C Expandable to approx. 75 °C according to manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar Equipment Stainless steel test chamber Large viewing windows Front door with locking mechanism Test specimen carrier / frames SO₂ gas system Pressure gauge Manual controls Base frame with storage area Areas of application Corrosion testing Coating testing Material testing Quality assurance Automotive industry Research and development Condition Used Signs of wear and tear due to age and use Optical condition as shown in the pictures Scope of delivery as shown in the pictures Scope of delivery 1x H. Köhler HK 320 BF Kesternich testing device Accessories as shown in the pictures Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Gsdpfszii Awex Akhskd Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Leybold Oerlikon Type: RUVAC WSU 501 Leybold Oerlikon RUVAC WSU 501 Roots vacuum pump booster, 505 m³/h, 2.2 kW, DN100 For sale is a powerful industrial vacuum roots pump from the manufacturer Oerlikon Leybold Vacuum. The roots pump serves as a booster pump to increase the pumping speed in vacuum systems and is typically operated together with a backing pump. It is ideally suited for industrial applications such as coating systems, vacuum furnaces, laboratory equipment or general vacuum technology. The pump impresses with its robust design and high pumping capacity. Godpfjytfzrsx Akhskd Technical data: Manufacturer: Oerlikon Leybold Vacuum Model: RUVAC WSU 501 Year of manufacture: 12/2010 Pumping capacity: 505 m³/h (50 Hz) / 606 m³/h (60 Hz) Max. pressure difference: 80 mbar Motor power: 2.2 kW Speed: 2900 rpm Voltage: 230 / 400 V three-phase Current draw: approx. 9.0 / 5.2 A Operating mode: S1 continuous operation Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 25,900 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Arocs 3251 suction excavator * First registration: 01-2023 * Suction excavator MTS Dino 12 * Stainless steel cladding * Hydrostatic drive for suction, driving, and steering * Articulated boom EVO Power ARM Gen2 * 2 x turbine * Operating hours turbine: 1,058 h * Operating hours compressor: 943 h * DINO 12m³ container * Stainless steel lining throughout * Articulated boom EVO-POWER ARM GEN2 * Rotary suction pipe system IKE/PERFOR * Hydrostat-RPM15 * Full cladding DESIGN * High-pressure water system 30 l/min * Hydraulic oil, biodegradable * Aluminum fenders * Storage box made of stainless steel on the frame * Container with 2 pneumatic vibrators * Ladder under the hose rack * Light package I: 3 LED lights on the vehicle frame * Light package II: 2 LED lights on the central joint of the articulated boom Gkedpez I Ic Djfx Akhod * Light package III: LED light strips in the tool box * Light package IV: Cable reel * Light package VIII: Light bar at the rear * 4 warning lights (switchable at the rear) * Anti-slip coating on the lid * Ball head trailer coupling 3.5t * More pictures and videos via WhatsApp * Subject to change and prior sale. No guarantee.

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Container No. G0123023_1 – Manufacturer: Kögel. * Sliding roof tarpaulin * Double corner fittings * Insertion strip (wood) * Outline marking on the side/rear Gkedpfx Akj Agd Hzshod * Load certificate Code-XL * Multi-hole strip * Portal door with double swivel bar locks (inside) * Side sliding tarpaulin * Forklift accessible * Fixed support legs * Device for rail loading * Lashing options * Perforated pallet retaining strip Used roof tarpaulin. Financing available upon request. Financing possible. Weatherproof storage container, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY AVAILABLE. Used tarpaulin. Technically ready for use, no further repairs needed. Partial paintwork. Substructure (KTL) coating with signs of wear. UVV certificate valid. UVV documentation available. Interchangeable container with lettering (see photos). LASI CODE XL!!! Multiple units available! Dimensions are approximate. Offer subject to change; we reserve the right to sell the item in the meantime. Prices are net, ex works D-59302 Oelde. Further details upon request by phone or email.

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Gkedemrrwfjpfx Akhsd

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, parking heater, SERIES FEATURES ? Reclining backrest ? Handle on the center aisle OPTIONAL FEATURES ? 3-point safety belt for each seat ? Adjustable center armrest with upholstery ? Fabric upholstery SEATS ? Lineo passenger seats, adjustable ? Passenger seats: KNEITZ ROYAL BLUE 6485/6240 DOORS ? Door opener on the left side of the dashboard ? Door 2, external opening 800 mm, single-leaf ? 4 red "Emergency" buttons BODY ? Water-repellent bottom edges made of plywood with cutouts Painting & Decoration ? Enhanced corrosion protection for the underbody Paint color ? RAL 9010 Exterior fittings ? Mud flaps on all axles Floor covering ? Sealed joints of the floor covering under the trim strips of the body Handrails/Partitions ? Partition coated with cement fiber panels ? Partition tubes (epoxy resin coating) RAL 7004 Window blinds ? Prepared for blinds on the side windows Luggage rack ? Overhead luggage compartment inside Floor covering ? FL021 Gayawood 4521 Yellowstone Car radio ? Two-zone AM/FM/DAB+ radio, USB and SD card connection DIN MICROPHONE ? 1 microphone for the driver and 1 for the hostess OPTIONAL ? 13-pole trailer socket HEADLIGHTS ? Fog lights ? Xenon warning lights with door opening assistant STOP REQUEST ? STOP REQUEST WITH LIGHT AND BUZZER CONNECTION WINDOWS ? All doors with single glazing ? Rear window with single glazing Gkjdpfxjzw Sq Hj Akhjd ? Windshield with standard defroster ? All windows non-opening ? Double glazing ? Emergency stop switch with chain ? Driver's window with double glazing AIR VENT ? 2 manual roof vents HEATING ? Reinforced convection heaters for the passenger compartment ? DEL AUXILIARY WATER TANK FOR THE HEATING ? SPEROS HEATING WITH PREHEATED NOZZLE AND REINFORCED WATER PUMP AIR CONDITIONING ? Air conditioning + auxiliary heating 32 kW DRIVER'S CABIN ? Reversing camera ? ADDITIONAL SUN VISOR FOR THE LEFT EXTERIOR MIRROR DRIVER'S SEAT ? STANDARD DRIVER'S SEAT WITH INTEGRATED HEADREST - TOP SPECIFICATION ? Armrests on the right and left side of the driver's seat DRIVER'S AREA ? Electric front and manual side curtain ? Coat hooks for driver and passenger ? Air conditioning for the driver LUGGAGE COMPARTMENT ? Luggage compartment with door ? Driver's seat heating DRIVER'S CABIN ? Digital tachograph Dtco 4.1 Smart HOSTESS ? Reclining hostess seat ENGINE ? 2500 RPM ? Engine power 320 HP/235 kW ? Speed limiter 100 km/h ? Diesel filter heater for Webasto ? FUEL TYPE: Diesel + HVO AUTOMATIC TRANSMISSION ? AUTOMATIC TRANSMISSION ZF 6AP1220B ? KEYPAD FOR AUTOMATIC TRANSMISSION ON THE LEFT SIDE OF THE DRIVER OUTSIDE THE DRIVER'S SIDE - 6 BUTTONS REAR AXLE ? REAR AXLE RATIO 5.63 SUSPENSION ? Shock absorbers ? Air suspension ? Lowering function BRAKE SYSTEM ? BRAKE PADS TYPE INTERCITY ? FAE ITALY FUEL TANK ? TANK CAP & KEY ? Fuel tank capacity 430 l (310 l + 120 l) WHEELS AND TIRES ? On-board tools as standard ? Spare wheel holder with spare wheel WHEEL NUT COVERS / RIM COVERS ? Wheel nut covers at the front TIRES ? TIRES 295/80R22.5 - QUICK ON ROAD/SNOW 152/148 ? X MULTIWAY 3D XZE + XDW ICE GRIP

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically lowerable, motorcycle chock Features: - Aluminum floor - LED lighting - Foldable Net: €1,924.37 / Gross: €2,290.00 Article number: LMT175241000.01 Technical data: • Brand: Lorries • Model: MT-1 • Vehicle type: Motorcycle trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 238 x 104 x 0 cm • External dimensions (L x W x H): 332 x 173 x 96 cm • Permissible total weight: 750 kg • Unladen weight: 175 kg • Payload: 575 kg • Chassis: Low-loader (wheels next to the body) • Tires: 155/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • HALF-FOLD system, allowing you to fold the trailer in half to save storage space • Folded dimensions: 233 x 171 x 65 cm (H x W x D) • Lowerable loading platform via hand winch • Stable frame construction • Frame galvanized and then powder-coated in an elegant black color • Trailer can be stored upright • Closed floor made of aluminum tread plate • Floor at the rear with ramp over frame • Wheel holder (motorcycle chock) for stable fixation of the motorcycle • Optionally also with rear wheel holder • Suitable for transporting one motorcycle • Optionally expandable with 2 possible bicycle holders to the right and left next to the motorcycle • Folding, galvanized and powder-coated tubular drawbar • Plastic mudguards • 8 lashing eyes distributed on the loading platform • Maintenance-free rubber spring axle • 13-pin connector • Large-sized LED safety lighting • Integrated rear fog light • Support wheel mounted _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Gksdpozy Dd Rofx Akhsd Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Features: - Multiplex walls Gsdpfx Akezy Dlhshjkd - 2-door rear door - 6x lashing eyes Net: €4,550.42 / Gross: €5,415.00 Article number: HKP220301518.01 Technical data: • Brand: Humbaur • Model: HK 203015-18P • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 304 x 151 x 180 cm • External dimensions (LxWxH): 453 x 203 x 243 cm • Loading height of the floor: 57 cm • Perm. total weight: 2,000 kg • Tare weight: 615 kg • Payload: 1,385 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/65R15 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multi-layer wood, 18 mm thick, with UV-resistant plastic coating • Sturdy V-shaped drawbar, hot-dip galvanized • Longitudinal members continuous • 2-leaf rear door • Twist-lock and hinges galvanized • 1x maneuvering handle at the front • Lashing eyes in the frame profile, tensile force 400 kg per lashing eye, Dekra certified • Reverse automatic • ALKO overrun device and parking brake • Plastic mudguards • Interior light installed • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum cover, front-mounted, off-road 185/70R13C tires Equipment: - Steel sideboards - 4 lashing eyes - Steel cover Net: €3,016.81 / Gross: €3,590.00 Article number: KEB210201072.04 Technical data: • Brand: TPV Trailers • Model: KT-EB2-Offroad • Vehicle type: Covered trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 202 x 107 x 72 cm • External dimensions (LxWxH): 308 x 165 x 139 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,000 kg • Unladen weight: 341 kg • Payload: 659 kg • Chassis: Low-loader (wheels next to the body) • Tires: 235/75R16 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Sideboards made of 1.5 mm steel sheet with aluminum-zinc coating • Continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 9 mm continuous without joints, non-slip and waterproof • Eccentric locks for the rear door and cover • Galvanized V-drawbar • Aluminum tread plate fenders, reinforced and walkable • Steel cover with KTL coating and black powder coating, 56 mm high with roof rails, splash-proof • Load capacity of the cover: 20 kg open / 75 kg closed • 4 lashing points mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • Shock absorbers mounted on the wheels • 100 km/h manufacturer approval • 2 rear supports mounted Gedpfx Akozy A Tqjhskd • Support wheel mounted with clamping bracket • 13-pole plug • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, Sandwich construction Equipment: - 8 lashing points - 30mm insulated wall - Lashing rails Net price: €7,542.02 / Gross price: €8,975.00 Article number: TKD227402020.02 Technical data: • Brand: Vezeko • Model: TK D • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 405 x 204 x 205 cm • External dimensions (L x W x H): 563 x 255 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 913 kg • Payload: 1,787 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design • Floor panel made of Finnish multiplex • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30 mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25 mm • Aluminum ramp • Non-slip with gas springs • With 4 tie-down straps, hot-dip galvanized • Instead of 2 rear doors • With twist-lock latch, lockable • Load capacity with max: 800 kg • 2 maneuvering handles at the front • Rear frame on hot-dip galvanized steel, welded • 8 lashing eyes embedded in the floor (750 DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior Godpfszy A T Dox Akhjkd • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrunning device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration certificate can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door, aluminum rims Gkjdpezy Dcyjfx Akhjd Equipment: - 6x lashing eyes - Rear supports - Shock absorbers + 100 km/h approved Net: €4,529.41 / Gross: €5,390.00 Article number: VC2113261516.05 Technical data: • Brand: Variant • Model: 1315 C2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 258 x 148 x 157 cm • External dimensions (LxWxH): 401 x 191 x 210 cm • Loading height of the floor: 51 cm • Permissible total weight: 1,350 kg • Unladen weight: 387 kg • Payload: 963 kg • Chassis: Low-loader (wheels next to the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Yes DESCRIPTION • Stable V-drawbar, hot-dip galvanized • Frame is very torsion-resistant due to its robust construction • Floor panel, 15 mm thick • Side walls and roof made of multi-layer wood, 12 mm thick, with UV-resistant black plastic coating • Interior light - LED installed • Tailgate with gas springs and non-slip surface • Rotating bar lock and hinges galvanized • Side door, standard on the right front, approx. 68cm, lockable with rotating bar lock • 2x maneuvering handles on the front • Wheel shock absorbers + 100km/h approval • Aluminum rims • 6 lashing eyes mounted on the floor (500DaN/kg) • Maintenance-free rubber spring axles from KNOTT • Reverse assist system • KNOTT inertia coupling and parking brake • Plastic mudguards • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog lamp • Lighting recessed in the rear frame • Support wheel with clamping bracket _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired additions! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transit plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, Price upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts are possible when purchasing multiple containers. Europe-wide delivery is possible upon request. *Leasing/hire purchase possible.* 3 units, 6000 mm, in stock, RAL 7043 2 units, 6000 mm, available shortly, other RAL colors on request 4 units, 6000 mm, in stock, with 10 stakes and 8 lashing eyes, RAL 7043 1 unit, 6500 mm, in stock, RAL 7043 1 unit, 6500 mm, available shortly, other RAL colors on request 7000 mm available in approximately 4-6 weeks, RAL color on request Other designs and sizes are available from the Paderborn warehouse. You can view our inventory on our website. Roll-off container platform according to DIN Technical description: * Dimensions 6000 mm: 6000 x 2550 mm internal * Dimensions 6500 mm: 6500 x 2550 mm internal * Tare weight 6000 mm: 1,720 kg * Tare weight 6500 mm: 1,807 kg * Longitudinal beams INP 180, spacing according to DIN 30722 * Tear plate floor 5 mm S 235 * Including 8 lashing eyes in the floor, loadable up to 2.5 t * End wall height 1500 mm * Hook Ø 50 mm S355 * According to DIN 30722, including testing according to DGUV rule 114-010 * Steel roller bearings 159 x 6.3 mm, length 300 mm * Zinc phosphate primer and coated with synthetic resin paint * Permissible total weight 15,000 kg * Container, storage container, roll-off container, hook lift container, large-volume container Gksdpfx Ako Aifcijhsd Errors and prior sale are reserved. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - 6 lashing eyes - Multiplex walls - Tailgate Net price: €3,536.97 / Gross price: €4,209.00 Article number: HKP113251515.02 Technical data: • Brand: Humbaur • Model: HK 132515-15P • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration Gjdpfxezy Aubj Akhskd • Interior dimensions (L x W x H): 251 x 151 x 152 cm • Exterior dimensions (L x W x H): 399 x 200 x 212 cm • Loading height of the floor: 53 cm • Permissible total weight: 1,300 kg • Unladen weight: 465 kg • Payload: 835 kg • Chassis: Low-loader (wheels beside the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating • Sturdy V-drawbar, hot-dip galvanized • Longitudinal beams continuous • Tailgate with gas spring and non-slip surface (max. load 300 kg) • Twist lock and hinges galvanized • 1 maneuvering handle at the front • Lashing eyes in the frame profile, tensile force 400 kg per lashing eye, Dekra tested • Automatic reversing system • ALKO overrun device and parking brake • Plastic mudguards • Interior light installed • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the middle _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop - for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich panel construction Equipment: - 8 tie-down points - 30mm insulated wall - Tie-down rails Net: €6,500.00 / Gross: €7,735.00 Article number: TKS227401820.01 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: without initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 405 x 184 x 205 cm • External dimensions (LxWxH): 563 x 235 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 835 kg • Payload: 1,865 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, securely bolted V-drawbar • Very stable aluminum frame • Frame is very torsionally stiff due to its robust construction • Floor panel made of Finnish multiplex • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Top layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich, 25mm • 2-wing rear door with stainless steel swivel latch, lockable • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Rear frame on hot-dip galvanized steel, massively welded • 8 recessed tie-down loops inside the floor (750DaN/kg) • Slotted hole tie-down rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • Plastic fenders Gkedpfxszy Dc Hs Akhjd • 13-pole connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door Equipment: - Tie-down rails - Plywood walls - Windows Net price: €5,293.28 / Gross price: €6,299.00 Article number: BTP220301518.16 Technical data: • Brand: Blyss • Model: F2030HTD • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Interior dimensions (L x W x H): 305 x 150 x 180 cm • Exterior dimensions (L x W x H): 452 x 202 x 233 cm • Loading height of the floor: 50 cm • Permissible total weight: 2,000 kg • Unladen weight: 650 kg • Payload: 1,350 kg • Chassis: Low loader (wheels beside the body) • Tires: 185/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Reinforced, bolted V-drawbar • Hot-dip galvanized frame Gksdpex U Et Sefx Akhjd • Floor panel made of 15mm plywood • Body made of plywood - plastic-coated walls • Roof made of plywood • Loading ramp with gas springs and non-slip surface • 2x maneuvering handles at the front • 6 recessed tie-down anchor points inside the floor • Tie-down rails mounted on both sides inside at 2 heights, h = xx cm • Forced ventilation on the side walls: 2x internal fans • Maintenance-free rubber spring axles from KNOTT • Shock absorbers incl. 100 km/h approval • Side door, hinged at the front right, lockable from the inside and outside • Side window, openable, on the front right • 2x supports at the rear for safe loading even when not attached • Reverse automatic • KNOTT drawbar coupling and parking brake • Steel mudguards • 13-pole plug • Reversing light • Large safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery possible nationwide - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, smooth exterior walls Equipment: - 8 tie-down points - Tie-down rails - Smooth GRP coating Net: €4,865.55 / Gross: €5,790.00 Article number: ULK220301619.01 Technical data: • Brand: Unsinn • Model: UKU 301519-20-13 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 305 x 157 x 194 cm • External dimensions (LxWxH): 449 x 210 x 252 cm • Loading height of the floor: 54 cm • Permissible total weight: 2,000 kg • Unladen weight: 515 kg • Payload: 1,485 kg • Chassis: Low loader (wheels next to the body) • Tires: 175/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant aluminum chassis for safe driving characteristics • Side walls made of Unique Panels, consisting of GRP-steel-sandwich, similar to white RAL 9016 • Transparent roof for good visibility when loading • Loading area made of multi-laminated screen printing plate 18mm, non-slip and waterproof • Rear frame and edging profiles made of special aluminum profiles, anodized for aesthetically pleasing appearance • Double-leaf door at the rear • Twist-lock and hinges galvanized • Reversing aid • ALKO coupling and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel, reinforced version Gjdpfx Aezy A Diokhjkd _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years - Errors, mistakes and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, door/ramp combination, side door Equipment: - Tie-down rails - Plywood walls - Aero slope Net: €10,075.63 / Gross: €11,990.00 Article number: IBV235361721.06 Technical data: • Brand: Ifor Williams • Model: BV126G • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 360 x 173 x 214 cm • External dimensions (LxWxH): 532 x 230 x 264 cm • Permissible total weight: 3,500 kg • Tare weight: 1,176 kg • Payload: 2,324 kg • Chassis: Low-loader (wheels beside the body) • Tires: 175/75R16C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable, welded, and hot-dip galvanized steel frame • Frame is very torsionally rigid due to its robust construction • Leaf spring suspension, can withstand extreme loads • Floor panel coated (non-slip) • Numerous crossmembers for high point loads • Body made of very solid plywood walls (plastic-coated) • Transparent roof window • Front tapering to a point (aerodynamic) • Side door on the front right, lockable • Ramp & door combination - high load capacity up to 1000 kg • Aluminum loading ramp can be converted into wing doors • Loading via ramp or also with a forklift from the rear is possible • Rear ramp with a flat, tapering tip • Lifting aid with springs on the ramp • 2x maneuvering handles at the front • Rear frame on hot-dip galvanized steel, welded • 2x Tie-down rails mounted on both sides, h1 = xx cm, h2 = xx cm • Reverse automatic system • KNOTT overrun device and parking brake • Lockable coupling head • Plastic fenders Godpfxozy Dbvs Akhjkd • 13-pole plug • Reversing light • Large safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Spare wheel with holder • Rear supports mounted • Support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, sandwich panel construction Equipment: - 8 lashing eyes - 30mm insulated wall - Lashing rails Net price: €9,117.65 / Gross price: €10,850.00 Article number: TKD227402020.05 Technical data: • Brand: Vezeko • Model: TK D • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 405 x 204 x 205 cm • External dimensions (L x W x H): 563 x 255 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 913 kg • Payload: 1,787 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, stable, bolted V-drawbar • Very stable aluminum frame • Frame with very high torsional rigidity due to its robust design • Floor made of Finnish multiplex • Many cross members, resulting in high point load capacity Gjdpfx Akezy Db Nshokd • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich, 25mm • Ramp & door combination • Aluminum loading ramps that can be switched to hinged doors • Loading via ramp or also with a forklift from the rear • Non-slip, with gas springs • With 4 longitudinal supports, hot-dip galvanized • Instead of 2 rear doors • With rotating rod lock, lockable • Load capacity: max. 800 kg • 2 maneuvering handles at the front • Rear frame on hot-dip galvanized steel, welded • 8 lashing eyes recessed in the floor (750DaN/kg) • Slotted-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Plastic fenders • 13-pin plug • Reversing lights • Large safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to make requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door Equipment: - 8 lashing points - Multiplex walls - Roof window Net price: €6,126.05 / Gross price: €7,290.00 Article number: VC4113341617.05 Technical data: Gedpfx Aszy Dcmjkhjkd • Brand: Variant • Model: 1317 C4 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (German vehicle inspection): 2 years from first registration • Internal dimensions (L x W x H): 346 x 168 x 178 cm • External dimensions (L x W x H): 490 x 211 x 233 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,350 kg • Unladen weight: 615 kg • Payload: 735 kg • Chassis: Low-loader (wheels next to the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Stable V-drawbar, hot-dip galvanized • Frame with robust design, very torsion-resistant • Floor panel 15 mm thick • Side walls made of multilayer wood, 12 mm thick, with UV-resistant plastic coating • Roof window, transparent, made of plastic • Rear access ramp • Twist-lock and hinges galvanized • Continuous interior height: approx. 173 cm • Continuous interior width: approx. 157 cm • Side door, standard on the right front, approx. 76 cm, lockable with twist-lock, 160x76 cm (H x W) • 2 maneuvering handles at the front • 8 lashing rings mounted on the floor (500 DaN/kg) • Maintenance-free rubber spring axle from KNOTT • Reverse driving automatic • KNOTT overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years. - Subject to errors, omissions and prior sale -