Used Combine Harvester for sale (3,923)

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg Psdpfx Asiiyppjlcora OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: new, Stable steel-cast iron construction High-precision format sliding carriage made of anodized aluminum with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade adjustable by 45° Pjdpfxeiiynns Alcera Large fence frame (960 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm Heavily ribbed planer worktables made of cast iron, annealed and stress-relieved for decades of stability and flatness Helical steel infeed roller for uniform material feed Three milling speeds, manually adjustable Milling spindle with clockwise/counterclockwise rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Planer table width 410 mm Planer table length 1810 mm Maximum chip removal 4 mm Thickness table length 605 mm Thickness table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed rate 7 m/min Maximum chip removal 4 mm Dust extraction port diameter 4 x 120 mm Planer cutterhead type TERSA (3 pcs) Planer cutterhead diameter 72 mm Speed 5200 min⁻¹ Circular saw fence length 2250 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2310 mm Saw blade tilt 90 – 45 ° Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min⁻¹ Sliding carriage and table Format sliding carriage length 2600 mm Spindle diameter 30 mm Speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. adjustable/non-adjustable 180/210 mm Power of drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDED OPTIONS - Handwheel with gravity-assisted numerical display for thickness table positioning - Sliding carriage length 2600 mm - Professional fences - "TERSA" planer cutterhead - Clockwise/counterclockwise rotation of the milling cutter

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter: 280 mm, turning diameter over top slide: 165 mm, center height: 140 mm, turning length: 700 mm, total length: 1,280 mm, total width: 700 mm, total height: 1,650 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 70 rpm, bed width: 180 mm, type of input current: three-phase, overall weight: 320 kg, quill mount: MK 5, three-jaw chuck diameter: 160 mm, Equipment: rotational speed infinitely variable, WMP290V-F Lathe & Milling Combination with frequency inverter including 2-axis digital readout SINO Psdpfx Alepz I Iqjcsra including premium base cabinet LATHE Centre distance ----- 700 mm Centre height ----- 140 mm Swing over bed ----- 280 mm Swing over cross slide ----- 165 mm Spindle bore ----- 38 mm Spindle taper ----- MT5 Lathe speed range ----- 70-1800 stepless rpm Tailstock taper ----- MT3 Motor power ----- 1.5 kW Weight ----- 230 KG MILLING UNIT Milling head outreach ----- 185 mm Milling speed range ----- 50-2250 stepless rpm Milling spindle taper ----- MT2 Milling head swiveling ----- +/- 90° Quill stroke ----- 50 mm Motor power ----- 750W Weight ----- 75 KG

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,900 kg, empty load weight: 2,100 kg, loading space volume: 12 m³, loading space width: 2,420 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering brand new, factory-new roll-off platforms with steel side walls for sale, manufactured in our own production facility. The platform features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50 mm diameter - Hook height 1570 mm - Platform dimensions: 6,000 mm x 2,420 mm x 800 mm - 2x galvanized ladder rungs - 5 mm S-235 floor plate - Sheets and profiles continuously welded - Laterally spring-relieved steel side walls with 3 mm S-235 steel thickness - 7x side wall hinges per side for increased performance - Drive-over & spring-relieved rear gate (4.5 t point load!) - Side walls, gate, and rear supports can be completely disassembled quickly and easily if required Prodpfx Aeyrpkzslcja - Outer rollers are lubricatable and replaceable - 5 pairs of recessed lashing eyes with a tensile force of 2.5 t each, variably positionable in multilock strips - Front: 2x lashing rings, each with a tensile force of 7 t - All steel parts automatically sandblasted before processing! - Only steel from Thyssen Krupp used, including certificate - Primer: Premium 2K zinc phosphate primer - Paint: High-quality 2K paint in RAL 7016 - Warning marking according to §32 (1) StVO & DIN 67520 - Includes type plate & container inspection according to DGUV rule 114-010 (formerly BGR 186) - Immediately available - Unit price: €7,150.00 plus VAT - Also available in other platform lengths (4.5m / 5m / 5.5m / 6.5m) Nationwide delivery possible for an additional charge! If you are interested in other roll-off container products, we would be happy to receive your inquiry!

Condition: ready for operation (used), Year of construction: 2012, Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible. Predpezk I U Uofx Alcsa

Condition: ready for operation (used), Year of construction: 2006, Max. discharge volume: 4000cm³, net hopper volume: 1500cm³, stainless steel construction, corrosion protected, version with memory storage hoppers, circular multihead weighing system operating according to the partial quantity combination principle. Design features: chassis, frame, modules and product contact parts made of V2A, easy cleaning through enclosed design with load cells and vibratory drives integrated into the housing, electrical components integrated into the scale frame. Equipment: central product distributor with vibratory drive, inclination angle 20°, vibratory feed chutes with quick-release fasteners, dosing hoppers with motor-operated opening flaps, each driven by a separate motor, weighing hoppers with double-flap design and motor-operated opening flaps, each driven by a separate motor, all hoppers without flap return springs, storage hoppers arranged below the weighing hoppers to increase performance, line modules consisting of precision strain gauge load cells, hopper actuation system, electronic module for weight signal evaluation, control of the vibratory feed chutes, discharge chutes 55°. Electronics: control system with 32-bit multiprocessor module technology, MultiWeigh touch screen color display, with documentation. An on-site inspection is possible. Podezfp Hbspfx Alcera

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Pjdpfxsxc Ni Rs Alcsra

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Prsdpfjzkvl Iex Alcsa

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Prodjtwqzrjpfx Alcja

Condition: new, functionality: unexamined, machine/vehicle number: 0035719, Professional combination soft serve ice cream machine, Frigomat Twin 35, new and in original packaging. This machine combines a pasteurizer and a freezing cylinder and is suitable for ice cream parlors, the food service industry, and food production. Features and equipment: - Combination of pasteurizer and batch freezer - Automatic and semi-automatic programs - Suitable for granita, soft serve ice cream, and desserts - Electronic consistency control IES - Stainless steel container and robust agitator Technical data: - Production capacity: approx. 35 kg/h - Batch size: 2–6 kg - Power: 9 kW Psdpfx Aozrn Azolcsra - Connection: 400 V, 3-phase - Weight: approx. 323 kg - Dimensions: approx. 550 x 960 x 1,380 mm - Pasteurization up to 105 °C Documentation as well as warranty and CE certificates are available. Location: 65618 Selters (Taunus), Germany.

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Podpfjl Dpc Eox Alcora Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: good (used), Height: max 1,800 mm Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Electrical system: 380 VAC Electrical system: 50 Hz Electrics: 3 PH Clamping force: max 5,500 N Prjdpfx Alsqqkx Nocsa Equipment - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 - Control system: S7

Year of construction: 1998, condition: used, Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: Prsdpfjdmdtbox Alcsa • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife delivery: • belt delivery

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers Prododmdt Uepfx Alcsa • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: Predpfjd N D Niex Alcea • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Size with continuous feeder max 660 x 1.280 mm Size cross fold min 150 x 200 mm Size threefold min 200 x 300 mm Speed max 180 m/min Length with continuous feeder 5.890 mm Width 2.340 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • cross-fold knife • noise prevention 3rd folding unit: Prjdpfxjd E Nbqj Alcea • third-fold knife • Lärmschutzeinrichtung peripheral units and deliveries • stream delivery with pressing station -- optionales Equipment:--not included— • gate fold buckle plate

Condition: new, functionality: fully functional, spindle bore: 26 mm, turning diameter: 250 mm, turning diameter over top slide: 145 mm, center height: 125 mm, turning length: 750 mm, total length: 1,520 mm, total width: 670 mm, total height: 1,650 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, bed width: 135 mm, type of input current: DC, overall weight: 195 kg, three-jaw chuck diameter: 125 mm, spindle mount: MK 4, Turning and milling combination WMP250BVx750 with brushless motors including a luxury base cabinet LATHE Podpfx Aega T Emelcera Center distance ----- 750 mm Center height ----- 125 mm Diameter over bed ----- 250 mm Headstock bore ----- 26 mm Headstock spindle mount ----- MK4 Lathe speed ----- 50-2000 continuously variable rpm Motor power ----- 1.1 kW Weight ----- 135 KG MILLING UNIT Overhang of milling attachment ----- 170 mm Milling machine speed ----- 50-2250 continuously variable rpm Milling machine spindle mount ----- MK2 Milling head rotatable ----- +/- 90 degrees Travel of milling spindle quill ----- 50 mm Motor power ----- 600W Weight ----- 75 KG

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Psdpfx Aleztducocora

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Prsdpfx Ajih Dxdslcea Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Drive power Main motor 7 kW Installation Information Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Location: In stock at 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Jointer Standard equipped with TERSA quick-change system for planer blades. Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Prjdpsdqy Uqefx Alcja Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Min./max. working height: 3/200 mm Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Weight: 140 kg

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Psdjcnxayepfx Alcora The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment Pedpfx Alscnxa Secsra stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2025, Dimensions and Weights Prjdshkz E Topfx Alcoa Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Podscnwydopfx Alcera Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result Prjdpfecnxa Nox Alcsa