Used Combine Harvester for sale (3,450)

Year of construction: 2020, condition: as good as new (ex-display), High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Ljdpsiiywzsfx Ah Uehr Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug with base frame, integrated suction and brake Also other models available from stock! Inquire about the current stock.

Condition: excellent (used), Year of construction: 2022, For sale is a used Hammer circular saw-milling machine B3Winner with a cutting length of 1300 mm. The machine is in very good condition and has been reconditioned and inspected by our professional staff. Technical specifications: - Cutting length: 1300 mm - Cutting width: 800 mm - Cutting height: 103 mm - 4 milling speeds - Direction of rotation switch - Suction connection Ø 120 mm - Height-adjustable and tiltable - 2 motors, each 3 kW - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Lodpfx Aexdxgzjh Ujhr Related terms: circular saw, milling machine, router, combination machine, combi machine Reference: R-Y03O4

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Lodpjxc Ni Refx Ah Ujhr

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Dimensions and Weight Lhjdpfekwhykex Ah Uer Length approx. 1725 mm Width/Depth approx. 880 mm Weight approx. 270 kg Surface planer Max. cutting depth: 4 mm Extraction Connection Extraction port diameter thicknesser: 2 x 120 mm Thickness planer Min. working height: 3 mm Max. working height: 230 mm Max. cutting depth: 4 mm Electrical Data Drive motor power: 4 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterblock Type: TERSA Number of knives: 3 pcs Speed: 5200 rpm Max. planing width: 300 mm Feed Speed: 7 m/min Availability: short-term Stock location: Flörsheim

Condition: excellent (used), combined circular saw / milling machine / slot mortising machine - 30mm spindle Ledpfx Ahjwzyx Ae Uohr

Condition: used, Year of construction: 1988, working width: 510 mm, Panhans surfacing and thicknessing planer, model 445-A, 51 cm planing width. Cutter block with 4 straight knives, 2 feed rates, electric table height adjustment. The motor brake is unfortunately defective!!! Otherwise, the machine is in very good condition for its age. Lsdpfxexd D Nbs Ah Uohr

Condition: ready for operation (used), Technical characteristics 5-operation combination (planer, jointer, router, saw and mortiser) Thicknes planer : Usable width: 310 mm Useful height: 230 mm Surface planer : Usable width: 310 mm Table length 1400 mm Shaft diameter 70 mm, common to the robot and jointer Router : Shaft diameter 30 mm, length 125 mm Table width: 800 mm Saw: Blade diameter 250 mm, tiltable at 45°. Cutting height with 250 mm blade: 80 mm Ljdpfxjt T U E Es Ah Ujhr Table width 800 mm Rip fence length: 635 mm Mortising machine : Wick mortising (0 to 16 mm) Power and Motors Voltage: 220 V Pluging: Singlephased Overall dimensions

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1150 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. Lhodpoxdknwsfx Ah Uor Technical data: - Cutting length: 1250 mm - Cutting width: 900 mm - Cutting height: 103 mm - 4 spindle speeds - Directional switch - 3-knife cutter block - Planing length: 1400 mm - 3 motors, each 3 kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-B18YQ

Condition: used, Year of construction: 2008, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 112713, input frequency: 50 Hz, For sale: 2008 Weinig Variomat four-sided planer. Reliable, precise, and high-performance Weinig Variomat four-sided planer, manufactured in 2008, in excellent condition. Lhedpoxuk R Hjfx Ah Uor Key features: Four-sided planing: bottom, top, right, and left cutterheads Steplessly adjustable feed speed Stable, vibration-free machine frame Easy-to-use control panel

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Lhjdpfsvh I T Nox Ah Uor Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Lsdpfx Aetwqzroh Ujhr

Condition: good (used), Height: max 1,800 mm Lhodpfx Ajqqkx Neh Ujr Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Electrical system: 380 VAC Electrical system: 50 Hz Electrics: 3 PH Clamping force: max 5,500 N Equipment - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 - Control system: S7

Condition: ready for operation (used), Technical characteristics 5-operation combination (planer, jointer, router, saw and mortiser) Thicknes planer : Usable width: 310 mm Useful height: 230 mm Surface planer : Usable width: 310 mm Table length 1400 mm Shaft diameter 70 mm, common to the robot and jointer Router : Shaft diameter 30 mm, length 125 mm Table width: 800 mm Saw: Blade diameter 250 mm, tiltable at 45°. Cutting height with 250 mm blade: 80 mm Table width 800 mm Ledjtn H E Nopfx Ah Uehr Rip fence length: 635 mm Mortising machine : Wick mortising (0 to 16 mm) Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been inspected by our specialist staff and is in mint condition. Technical specifications: - Planing thickness width 410 mm - 3 knife blocks (reversible knives) - Dual folding planing tables - Planer stop pivots 90-45° - Thicknessing height 4-225 mm - 5.5 HP (4 kW) motor / 400 volts - Year of manufacture 2024 - Machine number 52.02.285.24 Lhsdpfxov Scx Us Ah Uor The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planer, planing, thicknessing Reference: R-L0J2U

Year of construction: 1966, condition: used, machine/vehicle number: 12558, Saw motor 2,2 kW 40ger spindle Lodpfx Aoigab Roh Ushr sliding carriage with short Festo-Superfix Milling fence with fine adjustment, without suction hood suction slotted hood 140 mm Cable + plug 16 A

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Model: FS 51 Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Infeed and outfeed tables can be tilted - complete Slotted table lips Low-noise table lips Motorized automatic brake Number of knives: 4 pcs Safety cutter block Table roller: 1 Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Extraction port diameter: 140 mm Space requirement approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in its current condition as inspected, without warranty or guarantee Lhsdpew U Emdsfx Ah Uer

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm max. module 8 min. module total power requirement 7,5 - 22 kW weight of the machine ca. t Ljdpfxjt Hwxzj Ah Ujhr dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Lhsdpfx Ajh Axryjh Ujr On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2024, functionality: unexamined, power: 265 kW (360.30 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA 6-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 90°C / RL 75°C, with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /BHKW - NATURAL GAS/BIOMETHANE Electrical output at cos φ=1: 265 kWel Electrical efficiency: 41.9 % Thermal efficiency: 44.1 % Total efficiency: 86.0 % Thermal output motor: 150 kWth Thermal output at 120°C exhaust gas temperature: 129 kWth Total thermal output: 279 kWth Electricity coefficient el/th. : 0,95 LEAN TURBO NATURAL GAS / BIOMETHANE ENGINE Engine type 6R Displacement: 12,7Ltr Combustion heat output - 100% load: 632kWel Gas consumption: 63,2Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. Lodot E N I Sspfx Ah Uohr The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container.

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Lhsdpfxjwi Ufte Ah Ujr Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Year of construction: 1978, condition: not inspected (used), machine/vehicle number: 1177, Connected load approx. 18 kW working width 140 mm Feed below consists of: conveyor belt 8800 x 60 mm bottom conveyor belt 8800 x 40 mm for stem Top feed consists of: Conveyor belt 7140 x 40 mm top Aggregates: pos. 1 - scoring unit 2,2 kW 3000 rpm. Lodpfjiw D T Ijx Ah Ujhr pos. 2 - milling unit 3 kW 6000 rpm. pos. 3 - milling unit 5,5 kW 6000 rpm. pos. 5 - belt grinding unit 2,2 kW 120 x 2060 pos. 8 - belt grinding unit 2,2 kW 120 x 2060 / frame grinding belt pos. 4, 6, 7, 9 - profile and edge breaking units Suction connection pieces 5x100 mm, 1x120 mm

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Ljdpfxovwd U Ij Ah Ushr

Condition: new, Year of construction: 2024, functionality: fully functional, power: 350 kW (475.87 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA V 8-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains/parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 85°C / RL 70°C, OPTIONAL: with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /CHP - Biogas 50% CH4 Electrical output at cos φ=1: 350 kWel Electrical efficiency: 41.4 % Thermal output motor at 180^exhaust gas temperature: 334 kWth Electricity coefficient el/th. : 1,05 Engine type V8 Displacement: 16 Ltr Combustion thermal output - 100% load: 845kWel Gas consumption at50%CH4: 169.1Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 Weight unfilled 4500kg The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. To ensure that the motors are kept warm, the installed heat pumps are programmed to start up in a set cycle, that they start up in a set cycle and thus enable the desired temperature to be maintained. An automatic gas shut-off valve for installation outside the CHP installation room is not included in the scope of delivery. Lhodet Uu Ezspfx Ah Uer The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container. The entire unit is also available as a natural gas version.

Condition: reconditioned (used), functionality: fully functional, Connected load 380V 3 x 3kW, weight approx. 550 kg, external dimensions 2700 x 1500 x 850 mm, turntable, jointer-thickness planer width 300 mm with three-knife shaft, table dimensions 310 x 1500 mm, clearance height 230 mm, circular saw 0-45° tiltable, max. cutting height 100 mm, saw table dimensions 350 x 950 mm, travel 1200 mm, saw blade diam. max. 300 mm, router with two speeds 3100 / 6200 rpm, router with two speeds 3100 / 6200 rpm, max. Cutting height 100 mm, saw table dimensions 350 x 950 mm, travel 1200 mm, saw blade diam. max. 300 mm, router with two speeds 3100 / 6200 rpm, router arbor 30 mm, height adjustment max. 110 mm, slot drilling device speed 4500 rpm, table size 180 x 470 mm, two-jaw chuck 0-165 mm, suction nozzle 3x100 mm Ledpfotqva Djx Ah Uehr

Condition: new, Year of construction: 2023, Basic equipment Diameter planing shaft 70mm, 3 knives of 410 mm Anodized planing fence 90°- 45° Lhjdpfx Aomft Nkeh Usr Total length 1800 mm Dressing fence 1500 x 150 mm Maximum chip removal 4 mm Passage thick planer 410 mm x 230 mm weight: 325 kg incl. special accessories: TERSA cutter block