Used Complete for sale (10,775)

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Lrodpfx Asx Tpzdohzeg

Condition: used, Truck dimensions (pallets): From 1 to 4) 140x110 h.120 Kg. 600 Lrsdpex Tuu Nofx Ahzjg 5) 140x130 h.40 Kg. 100 6) 150x100 h.90 Kg. 300 7) 320x100 h.120 Kg. 800 8) 320x90 h.80 Kg. 300 Inventory of parts: No. 69 pieces of 3 meters (total 207 meters) No. 1 piece of 2.80 meters No. 13 pieces of 3 meters (total 39 meters) No. 6 pieces of 1.80 meters (total 16.8 meters) nr. 2 pieces of 2.40 meters (total 4.8 meters) No. 1 piece of 1.50 meters nr. 2 pieces of 0.70 meters (total 1.4 meters) nr. 2 pieces of 1 meter (total 2 meters) No. 1 piece of 1.50 meters No. 17 curves of 1.20 linear meters (total 20.4 linear meters) with a pitch (diameter) of 1.15 meters No. 6 curves of 0.3 meters (total 1.8 meters) No. 1 trailer with 1.50 meter track

Condition: used, 60-pocket suction filter with 5 bags, complete with 9 kW suction unit and control panel, used. Height when assembled: 3.65 meters Lredpfoxlb Sijx Ahzjg

Condition: like new (used), functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The pellet press has been refurbished in 2024. The production line includes: - Amandus Kahl C35-780 Pellet Press with hydraulic nut - The Pellet Press has a new 110 KW engine Lrodpfx Ahexykzpozjg - Electrical cabinet with emergency stop including complete electrical documentation - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: good (used), Complete Resaw Line from intake to stacker with an Lrodpfx Ahom Uylpezjg AKE TB2B twin rebandsaw

Condition: good (used), machine/vehicle number: 3342, Year of construction: 2021, Carer COMPLETE FRONT-END from Uniktruck Lrsdpfoul D Rhex Ahzeg

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Söderhamn Eriksson Band Sawline 3 quad saw grups included reducers, 120 mm – 500 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 5.5(6.2) m. Feeding speed of the sawing line can be adjusted from 25 m/min to 90 m/min. - Top diameter: 120–500 mm - Maximum log diameter: 550 mm - Cant width in Chipper Canter 1: 75(82)–410 mm - Cant width in Chipper Canter 2: 75(82)–410 mm - Saw kerf: 2.7–3.2 mm - Chip length: 20–30 mm Sawline: 1) Log infeed 2) Butt-end reducer 1200mm 3) Debarker Cambio 850 (six tools) 4) 3D log sacnner (rema logbark) 5) Automatic log turner 6) Customill sawgrup 1 included reducer (4 bands) 7) Bord separator (first sawgrup) 8) Reducer 2 Söderhamn/Kocum 240-12 Lodpfjyag T Njx Ahzjrg 9) Customill sawgrup 2 (4 bands) 10) Bord separator (second sawgrup) 11) Customill sawgrup 3 (4 bands) 12) Edger line 1 Söderhamn Edgar 5200 (up to 35 pcs/min) 13) Edger line 2 Catech/Arivislanda (up to 40 pcs/min) 14) Gunnarssons combisorting line 40 pins (trimming 3 dm stepps) 15) Renholmen stacker W=1,6mH=1,6-1,8mL=5.6m 16) Automatic stick layer system of stick placers (25x50x1630) Waste handling conveyors electric and control system, hydraulic systems included.

Condition: used, Complete Corrugator width 2500: 3 single facer MITSUBISHI 50C (onda C,B,E) Lodpsycgazefx Ahzerg 7 Mill Roll Stand liner Martin 7 Splicer Liner Marquip 1 Mill Roll Stand liner Agnati year 2004 Gluer Peters year 1994 HOT PLATES Martin HI-Trac II Rotary Shear Agnati HRS 90 year 2003 Slitter Scorer Agnati Power Set year 2003 Cutt off Agnati TR/EL 90 year 2003 Stacker New Enginering

Condition: refurbished (used), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 400 mm, warranty duration: 12 months, total height: 2,300 mm, type of input current: AC, total width: 1,120 mm, total length: 1,540 mm, overall weight: 1,350 kg, input voltage: 230 V, table load: 30 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-reconditioned Mahr Multiscope 664 (Including certified factory acceptance before delivery) Factory-reconditioned premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Online or optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: - Delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements! Multisensor measuring device equipped with camera system and Renishaw touch system. Measuring range of all sensors: 600x600x400mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base frame) Max. load weight: glass plate 40kg Accuracy: U1=2.2 + L/150; U2=3.0 + L/125; U3=3.2 + L/100 (L= measuring length in mm) Lodeu Dw S Rjpfx Ahzerg max. travel speed: 250mm/s incl. camera with 2-stage zoom incl. laser incl. LED ring light incl. Renishaw TP200 touch probe system incl. frame grabber (Eagle) incl. Windows 10 incl. new Optichek 3D 5.0 ​​evaluation software Incl. Renishaw TP200 touch probe system The measuring device can be programmed for customer-specific parts during optional commissioning and calibration so that you are immediately able to run your measuring programs before any training that may be necessary.

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Ljdpfx Ahex H Tilszjrg Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE SAWING LINE - VTZ 1400 PLUS log band saw with BM 900 chipper canter, including all necessary conveyors - FRC chipping edger with 3D scanning and optimisation, including all necessary conveyors - Automated stacking machine - Waste conveyors Lredpfx Ahsxlym Eszog

Condition: used, Complete Factory Package for Processing PVC and Aluminium Profiles – Block Sale Includes the following machinery: 1️⃣ Welding and Cleaning Line – ProfteQ QUADOS Including: 4-head welding machine QUAD OS12 + transfer/cooling table + CNC corner cleaning machine FRT9 + automatic loading table Lrjdpfxev Ig Hhe Ahzsg 2️⃣ Machining Center – Mecal MC 304 Atlas 4-axis machine equipped with a head for frontal machining, specifically designed for aluminum processing. 3️⃣ Double-head cutting-off machine – FOM ALVA 500A – year 2005 Blade: Ø 500 mm – Blade inclination: external 4️⃣ Cold Saw – ALTECH GOTHA (complete with roller conveyors) Single-head ascending blade saw Ø 600 mm, blade tilting -45° / +45°, blade rotation with digital angle display. 5️⃣ Glazing Bead Cutting Machine – RobTech MAESTRO Designed for cutting aluminium and PVC glazing bead profiles with four blades positioned at 45°. 6️⃣ Single-head cutting-off machine – MG TLG 350 Blade Ø 350 mm – Table rotation: 45° - 0° - 90° 7️⃣ Two-Head Drilling Machine – FOM 8️⃣ Vertical Assembly Bench for Glass and Glazing Beads – ProfteQ BV7 + Bench – Rotox VPAH 3023 9️⃣ Assembly Table – FOM 🔟 Double-Sided Cantilever Rack – 1 Block (9 Shelves per Side) (Multiple units available). 11️⃣ Electric Forklift – Career R30N S (4 wheels) Capacity: 3,000 kg, complete with side-shift. 12️⃣ Electric Order Picker – OM XOp Capacity 1,200 kg, lifting height 6,725 mm, fork length 800 mm.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. Lrodpfoxz Eg Nex Ahzog The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.

Condition: like new (used), Year of construction: 2017, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 17002, cutting length (max.): 6,000 mm, power: 45 kW (61.18 HP), Kara F2000, little used, year of construction 2017, motor power 45kW, with feed and discharge system, dimensioning computer-controlled, incl. crosscut saw, incl. 6 saw blades, built-up grinder, incl. integrated extractor. Lredorg E Exjpfx Ahzeg

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Ledpfexrc Acjx Ahzorg

Year of construction: 2025, condition: used, New: Yes Lodpfxexwlqaj Ahzerg Power: 4 kW (5 HP)

Condition: used, Complete factory for the production of furniture cabinets, composed by: Lrsdpecr U Ursfx Ahzog SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Lredpsh T Dvtefx Ahzsg Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: Lrsdpshmkxqofx Ahzsg J10039A) Gantry-portal Loader (Double pick-up station) "MAHROS" Mod. Brush J10039B) 1st Double-side Sizing & Edge Bander "IDM" Mod. Activa SB 1/9900 J10039C) In-feeding Rollerway "MAHROS" Mod._____ with 90° Turning device (from lengthwise to crosswise) with double cone system J10039D) 2nd Double-side Sizing & Edge Bander "STEFANI". Mod. Performance SB2 J10039E) 90° Converyor Translator "MAHROS", complete with motorised roller conveyor and 90° motorised belts to translate the panels to the MAHROS Unloader J10039F) Brush-cleaning machine "WANDRES" Mod. BI46/1/1300 J10039G) Gantry-portal Stacker (Double station) "MAHROS" Mod. Brush

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, composed of the following machines: OZ2050A) Loader (Double-cage, double pick-up) "MEINERT" Mod. P 415 D/B - L with central motorized rollers table. With two external roller ways to in-feed the piles (stacks) of panels to loader. OZ2050B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 440 / A / R3 OZ2050C) Connecting Roller Table "IMA" Mod. IDK L/Q with turning device Lrsdpfxexftt Es Ahzjg (from lengthwise to crosswise) with double cone system. OZ2050D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 590 / B / R3 OZ2050E) Connecting Roller Table "IMA" Mod. IDK Q/L with Turning device (from crosswise to lengthwise) with double cone system. OZ2050F) Unloader (Double-Cage, double storage) "MEINERT" Mod. P 415 D/S - L With central motorized rollers table. With 2 on-ground motorized roller ways to out-feed the piles (stacks) of panels from the Unloader.

Condition: new, Ball bearings, 12,500 kg, various manufacturers, new, price per kilo! Only available for complete lot purchase! Lrjdsxytmnspfx Ahzsg

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Complete polishing line for granite slabs still active and fully functional, viewable and equipped with: Lrjdpfx Aexdnbbehzsg - automatic loading unit - motorized roller conveyors for automatic slab feeding - combined calibrating/polishing machine with high removal rate polishing spindles equipped with mechatronics for material calibration - equipment for drying by means of ventilation on both surfaces of the slabs - automatic waxing machine - automatic protective film applicator Available from next March 2026 .

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 36 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ Free shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ LIST PRICE 36.435 € ►34.750 € EXCL. VAT INCL. SHIPPING◄ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► Lodpfxoipv Nye Ahzerg ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder oven with electric heating - ELECLINE 12-1519 ✔️ Internal dimensions: 1500 mm L * 1200 mm W * 1570 mm H ✔️ Volume: 2.9m³ ✔️ Electrical heating power: 18 Kw/h ✔️ Circulating air flow rate (fan) : 3,300 [M³/H] ✔️ Power of the circulating air fan: 0.75 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ⭐ Powder booth – BOOTHLINE1200 - FL ✔️ Internal dimensions: 1130 mm L * 1250 mm W * 1450 mm H ✔️ 2 Flanged polyester filter ✔️ Ø325*1000mm filter dimensions. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder coating collection drawer ✔️ 360 degree rotatable and movable hanging device. ✔️ 1 PC 2.2 KW suction fan - 4500 m3/h ⭐ Powder Coating Gun - Strong Smart Multicolor Coat effortlessly with all powder colors, coat complex geometries with outstanding efficiency and quality, and do it in the most challenging environments. This paint gun set has a body with a stronger and more stable structure. ⭐ PAINT REMOVAL BASIN – BSK-1200-700*700 ✔️ Working dimensions (L/W/H): 1200 x 700 x 700 mm ✔️ External dimensions (L/W/H): 1450 x 950 x 1250 mm ✔️ Inside the tank is V4A stainless steel ✔️ Outside the tank: stainless steel. ✔️ Adjustable feet ✔️ Capacity: 832 liters ✔️ Electrical heating power: 22 Kw/h - 2 levels - Fast heating ✔️CE - certified ✔️ High-quality V4A stainless steel tubular heaters ✔️ Industrial damper for easy lid opening and closing ✔️ Exit/outlet via ball valve ✔️ Digital control with temperature limiter and timer ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: used, operating hours: 34,000 h, Technical Specifications & Performance Data This used complete bottling line is configured for aseptic carton packaging in the Tetra Pak Prisma 0.33L format. Engineered around proven Tetra Pak components, it provides a compact, reliable solution for high-quality industrial packaging and beverage production. The line configuration integrates filling, capping, and packing functions with smooth container handling for stable operation and consistent output. Production speed: 7500 pieces/hour Format: 0.33L Prisma (square) Container type: Carton (Tetra Pak Prisma) Line configuration: TBA19 (Filler) + TCA45 (Capper) + TCBP70 (Packer) Filler model: TBA19 Capper model: TCA45 Packer model: TCBP70 Operating mode: Aseptic packaging line for shelf-stable beverages Manufacturer: Tetra Pak Advanced Automation & Control Systems The line benefits from Tetra Pak engineering with integrated automation that supports stable aseptic operation. Centralized controls coordinate filler, capper, and packer modules for synchronized throughput, precise timing, and reduced downtimes. Recipe-based settings enable consistent setup for the Prisma 0.33L format, and operator-friendly HMI interfaces facilitate monitoring, diagnostics, and quick adjustments during production. Lrjdpfx Ahox E U Akezog Production Line Integration Capabilities Designed for seamless integration into a complete production environment, this used bottling line supports upstream and downstream connections such as infeed handling, carton supply, and end-of-line palletizing. The Prisma 0.33L format is standard in the configuration, ensuring reliable format handling and efficient changeover within the same format family. The conveyor logic and module interfaces help maintain continuous flow and balanced line performance in second hand industrial packaging applications. Machine Condition & Maintenance History This second hand line is offered in working condition and ready for operation, with original model identification on the equipment. Tetra Pak’s serviceable design supports routine maintenance, with wear components and aseptic-critical parts accessible for inspection and replacement following standard preventive maintenance practices. The line is suitable for facilities aiming to expand or standardize aseptic beverage production without significant commissioning delays. Operational Performance & Versatility Optimized for aseptic processing, the system provides controlled handling from filling to cap application and packing. The TBA19 ensures accurate fill under aseptic conditions; the TCA45 applies compatible closures for Prisma cartons; and the TCBP70 organizes secondary packaging for efficient logistics. The result is a robust solution for industrial packaging where product protection, shelf life, and consistent presentation are essential. Installation Requirements & Site Preparation The line is intended for installation in a hygienic production area with controlled environmental conditions suitable for aseptic operations.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Spaner Circular Saw Line EWD - Springer - Nicholson.... For sale is a complete, well-maintained used sawmill plant with an EWD saw line, comprised of modern components for round timber processing, sorting, and waste handling. Lredsx Rvdyspfx Ahzeg The plant has been regularly serviced and is in excellent condition. A part of the line is still in operation and can be viewed by appointment. Available from approximately June 2026. Overview of plant components: Log Yard: Sorting, measuring, and debarking system by SPRINGER, year 2017 Nicholson debarker, year 1992 Microtec measurement system, year 2015 30 sorting bins Crosscut system, year 2017 Saw Line – EWD: Twin-shaft circular saw DWK 700, year 1999 Profiling chipper PF 19-3SP/V, year 2003 Secondary edger BNK 225/6, year 2003 Complete mechanization and control system Edger EWD Optimes BK-100B Lumber Sorting and Auxiliary Equipment: 7 sorting bins with package handling Complete chip and residual wood removal system Drying kilns and heating system This facility provides a fully integrated production line for efficient round timber breakdown and industrial-level lumber processing. Ideal for companies seeking a compact, high-performance, and immediately operational solution. Year of main components: 1992 – 2017 Condition: very good Availability: from June 2026 Inspection: possible during operation by appointment