Used Crankshaft Turning Lathe for sale (9,154)

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N Bljdpfxsyh Hkzo Aa Nsd - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 6060304, overall weight: 10,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 2,400 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i-S, TRAUB TNL 32/7 CNC Lathe - Operating voltage: 400 V - Rated current: 73 A - Maximum fuse: 63 A - Rated power: 46 kW - Frequency: 50 Hz - Main spindle, motor spindle including hollow clamping system - Max. bar capacity: 32 mm - For clamping device diameter: 49 mm - C-axis max. speed: 8000 rpm - Max. stroke: 305 mm - Upper turret X/Y/Z and H-axis: 10 tool stations with dual drive - Lower turret X/Y/Z and H-axis: 9 tool stations with total drive and separate sub-spindle drive Blsdpfxjyh Hgcj Aa Njd - Sub-spindle including partial hollow clamping - Max. clamping diameter: LW 32 mm: C-axis, speed: max. 8000 rpm - Flushing unit mounted on the lower turret - Part length: max. 350 mm - Diameter: max. 32 mm - Incl. chip conveyor and coolant system from manufacturer RESY as well as a bar feeder from manufacturer FNB, type: TURBO 3-36 - Incl. all tools and tool holders shown in the photos Note: The item must be collected definitively between 01 and 02 April 2026 at an exact date to be agreed. FCA D-79115 Freiburg – loaded onto truck

Condition: excellent (used), Year of construction: 2021, INDEX C200, Mfd. 2021 Control: Siemens Solution Line 3 Turrets 2 Spindles D=90 mm IRCO VDI 30 With tooling prictured Short magazine bar Feed Bjdpfxex Av Dbj Aa Njld Machine located in Europe

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Control: SIEMENS Sinumerik 840D Solution Line Working area: Maximum workpiece height: 200 mm Maximum workpiece diameter: 250 mm Maximum swing diameter: 390 mm Maximum distance spindle stop to turret: 580 mm Minimum distance spindle stop to turret: 240 mm Spindles Maximum spindle speed: 5,500 rpm Spindle power per spindle: 37.7 kW Maximum spindle torque per spindle: 300 Nm Spindle nose with short taper (DIN 55026): A6 Axis travel X-axis travel (within working area with closed covers): 365 mm Bodjx Rwv Dopfx Aa Nold X-axis total travel: 886 mm X-axis travel (over turret center): -20 mm Y-axis travel: +100/-80 mm Z-axis travel: 250 mm 12-position disc turret Capto C5

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,000 h, functionality: fully functional, turning length: 80 mm, spindle speed (max.): 7,000 rpm, bar diameter (max.): 32 mm, controller model: Fanuc Serie 32i-B, TECHNICAL DETAILS Maximum bar diameter: 32 mm Maximum turning length: 80 mm Main spindle speed: 7,000 rpm C-axis (main spindle): 0.001° Maximum counter spindle diameter: 32 mm Counter spindle speed: 7,000 rpm Tool capacity: 23 tools MACHINE DETAILS Control system: Fanuc Series 32i-B Number of axes: 7 Operating hours: 16,000 h EQUIPMENT Coolant pump with increased delivery capacity Parts conveyor belt Bodpjyh Azpsfx Aa Nsld Mayfran chip conveyor Service kit with emulsion package Bar feeder FMB Turbo 3-36/3200 / A Emulsion coolant unit Accessories for short lathe subframe Note: The seller can offer disassembly and loading for €2,000.

Condition: good (used), Well-running Schaublin with attachments as per pictures with Bjdpfx Ajymmn Hsa Neld many shots

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Bsdpfxswz Rife Aa Nold Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Bsdpfxexf Uwxs Aa Njld Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, Max. bar diameter: 20 mm Max. headstock stroke: 205 mm Spindle speed: 500 - 10,000 rpm Max. bar diameter on sub-spindle: 20 mm Max. sub-spindle speed: 8,000 rpm Number of usable tools: 22 Turning tools with multiple tool holders: 6 Driven tools for cross machining: 3-8 Front drilling tools: 4 Rear drilling tools: 4 Driven tool speed: 8,000 rpm Bar feeder FMB turbo 3-26 Bedpfx Aeyb R Awea Njld

Condition: used, Year of construction: 2010, max. bar material dia. 20 mm max. working lenght 210 mm max. drilling capacity diameter 10 mm Bledpfx Ajyiu Tcea Ned control Hanwha Fanuc i Series turning speeds 8.000 U/min Turning Automatic Lathe - swiss lathe | HANWHA - XD 20 equipped with an LNS Express 332 (Bj. 2006) bar feeder. The machine has 26’457h processing time hours. The machine videos from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: XD-20 | XD20

Condition: used, Year of construction: 2010, max. bar material dia. 20 mm max. working lenght 210 mm max. drilling capacity diameter 10 mm control Hanwha Fanuc i Series turning speeds 8.000 U/min Turning Automatic Lathe - swiss lathe | HANWHA - XD 20 equipped with an LNS Express 220 (2007) bar feeder. The machine has 26.457h processing time hours. Blodpsyiu S Sefx Aa Njd A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: XD-20 | XD20

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, The face turning lathe PORĘBA TR-100C has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Bodshyg Iyopfx Aa Nold Availability: delivery time 3,5 months, starting from the order Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Please note: Bljdjk Sat Djpfx Aa Njd The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Blsdpfxexxm Hfs Aa Ned Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: excellent (used), Year of construction: 2018, Control Fanuc 32I-B, bar capacity 32mm, Bedpfxjw Rct Hj Aa Neld maximum cutting diameter 32mm, maximum cutting length 310mm, maximum drilling diameter 13mm, maximum tapping capacity M12, milling speed 5,000rpm, spindle speed 7,000rpm, Sub spindle C axis 0.001 degree, FMB Turbo 3-36/3200 barfeed, number of controlled axis Z, ZB, X, XB, C1, C2, Y. swarf conveyor,

Condition: excellent (used), Year of construction: 2018, Maximum workpiece diameter 285mm, Bedpfx Aaewb A Hcs Neld maximum workpiece length 280mm, Bar capacity 38mm, X axis stroke 480mm, Z axis stroke 285mm, spindle speed 6,000 rpm, power 5.5Kw, swarf conveyor.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 32 mm, turning diameter: 320 mm, center height: 160 mm, turning length: 650 mm, three-jaw chuck diameter: 160 mm, For sale here is a lathe from Voest Alpine in good condition! See pictures Manufacturer: Voest Alpine Model: DA-160 Centre height: approx. 160 mm Centre width: approx. 650 mm Turning diameter over bed: approx. 320 mm Turning diameter over cross slide: approx. 190 mm Spindle bore: approx. 32 mm Three-jaw chuck diameter: approx. 160 mm Bsdewq Ehbspfx Aa Nold Tailstock holder: MK3 Accessories included: Four-jaw chuck Ø 160 mm, 6x steel holders, 4x pairs of turning jaws External dimensions of machine: approx. 150x90x180 cm (LxWxH) The machine can be inspected and tested at our premises. Loading option: with stapler or crane Shipping costs on request (by postcode) You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale ex location 42855 Remscheid, free loaded. Errors in technical data and prior sale reserved.

Condition: excellent (used), Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, TRAUB TNL 18 – CNC Swiss-Type & Short-Turn Lathe Ex Works, previously used in medical technology, rejection rate 0.3% Machine Type: TNL 18 Machine Number: 6050338 Year of Manufacture: 2013 Condition: Used, very well maintained, productive in current use Included: High-pressure coolant system (KSS) + bar feeder Spindles & Machining Main spindle: motor spindle Max. bar capacity main spindle: 18 mm (optionally 20 mm) Max. main spindle speed: 12,000 rpm Max. torque: up to 10.5 Nm C-axis resolution: 0.001° Counter spindle: available Max. bar capacity counter spindle: 18 mm Max. counter spindle speed: 12,000 rpm C-axis counter spindle: yes Tooling System Upper turret: 8 stations Axes: X / Y / Z / B / H Lower turret: 7 stations Axes: X / Y / Z / H Rear tooling device: 7 stations Max. simultaneous tools in cut: 3 Tool capacity: Standard: 22 Maximum (with multiple holders): up to 52 tools Axes & Dynamics Number of CNC linear axes: 7 Rapid traverse: up to 40 m/min (Z) Large travel ranges for Swiss-type and short-turn operation Simultaneous machining with main and counter spindle: yes Coolant & High-Pressure Coolant tank: approx. 500 l Standard pressure: 3 / 8 bar High-pressure (option, included): up to 20 bar Flow rate: approx. 28 l/min Filtration fineness: 50 μm Electrical Data Rated voltage: 400 V / 3~ / N / PE Rated current: 56 A Bodpfxsycl Udo Aa Nsld Max. fuse protection: 63 A Rated power: 35 kW Connection load: 24 kVA Frequency: 50 Hz Control voltage: 24 V DC Dimensions & Weight Machine dimensions (L × W × H): approx. 3060 × 1480 × 2420 mm Weight: approx. 4,300 kg Summary (listing short text) TRAUB TNL 18, year 2013 CNC Swiss-type & short-turn lathe Main and counter spindles 2 turrets + rear tooling device High-pressure coolant included Bar feeder included Very rigid production machine Rejection rate only 0.4% Ideal for precision and series production I am selling the following machines: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Cleaning / Ultrasonic cleaning – 2015 Mollart Drillsprint – Gun drilling machine / Deep hole drilling – 1996 Traub TNL 26 – Swiss-type lathe – 2004 Traub TNL 26 – Swiss-type lathe – 2007 Traub TNL 26 – Swiss-type lathe – 2009 Traub TNL 18 – Swiss-type lathe – 2013 Traub TNL 18 – Swiss-type lathe – 2014 Star SV-20R – Swiss-type lathe – 2019 Traub TNL18-9P – Swiss-type lathe – 2015 Traub TNL18 – Swiss-type lathe – 2014 Traub TNL18-9 – Swiss-type lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Grinding bench DP07 – Grinding & polishing (implants) – 1986 Turntable blasting unit Rösler RWT 1000-I – Blasting cabin – 2012 Bending machine C 202 M – Bending – 1990 Schmidt hydro-pneumatic press – Press / hydro-pneumatic press – 2021

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg Bodpfjib D H Rex Aa Neld In good condition

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 Blsdslzm Eqspfx Aa Ned center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm Bsdpfow Uf Hwex Aa Nsld - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Bodpfsydaadsx Aa Neld Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The machine can be inspected at our warehouse until March 3rd after it is commissioned at the factory. Bsdpoyh Itwjfx Aa Njld

Condition: good (used), Year of construction: 2008, For sale is 1 Scherer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in the front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Bljdpfxsydl Dbj Aa Nod Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: good (used), Year of construction: 2004, For sale are 2 pieces of shearer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Bsdpfoydl Awex Aa Nold Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.