Used Crankshaft Turning Lathe for sale (9,845)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Ijdpfx Acjwz Rifspstn Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, functionality: fully functional, L&Z precision lathe, Leinen & Boley model, with lighting, quick-change tool holder Multifix, steady rest, coolant pump, and 125mm chuck. Ijdjzpd T Dspfx Acpstn (A 165mm chuck is also possible), turning length 500mm, various related parts included, with a 50-liter compressor. €1500.00

Condition: like new (used), Year of construction: 2026, TECHNICAL DATA: Turning diameter 2000 mm Max. workpiece height 1200 mm Max. workpiece weight 8000 kg Faceplate diameter 1800 mm Faceplate speed range / 4 automatic stages 0-210 rpm Max. faceplate torque 31500 Nm Main drive power 55 kW EQUIPMENT: - 4-position turret or tailstock with 2 Capto clamping units - Central lubrication system SKF/VOGEL - Commissioning including training Itedof S Hcyopfx Acpon - 12 months warranty - Complete electrical equipment 230/400 V, 50 Hz, Made in Germany, CE standard OPTIONS: - Steel chucks - Tool changing system (10 positions) - Machine enclosure - Chip conveyor - Coolant preparation - Side support - Machine version with tailstock and 2x Capto C6 - ... CONTROL: CNC cycle control Fagor 8037TC/8055TC* or Siemens OTHER: CE Declaration of Conformity Geometrical acceptance test according to DIN 8609-2

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas M70 Itsdpfxey Hl Hij Acpen Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + FMB m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swarf & coolant tank, fire distiguisher. ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) LFV function: no

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW Itjdpfjrcivgox Acpjn SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE-59 BIG lathe with a center distance of 1,000 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Motor 2.2 kW / 3 HP / 400 V - Speed levels: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height 250 mm - Center width 1,000 mm - Hand rest 350 mm - Direction of rotation switch Itsdpfx Acstpnddopjn - Spindle M33 x 3.5 mm with ASR (Euro) run-off safety groove - Spindle and tailstock cone MK3 - Hollow spindle D = 20 mm - Main spindle with 4 bearings - Quill travel 150 mm (with scale) - Total length 1,780 mm - Weight 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, turning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: used, Oma lathe 1200 mm Isdpfszfyzvsx Acpotn Genini 1200 mm lathe grinder Conveyor belts for unloading lathes and loading automatic grinders

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed Iedpfx Aoib D H Recpotn - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: excellent (used), functionality: fully functional, LATHE FOR WORKSHOP USE For sale is a Drechselmeister Twister FU 200 lathe with a center distance of 715 mm. This lathe, which was used in a workshop setting, is in very good condition. Technical data: - Center height 200 mm - Turning diameter 395 mm (with optional external turning attachment, 700 mm) - Center distance approx. 715 mm (optionally extendable) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove* - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 boring quill - Motor 1.5 kW / 2 hp (connection 230 V) - Brake switch, 2-stage - Weight of base model 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, machine tool, woodturning lathe, turning, lathe tool, woodturning, turning, machine Itsdpfjzn Nm Tex Acpsn Reference: Turning at B.

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a like-new Drechselmeister Stratos FU 230 lathe with a center distance of 680 mm and a 2 HP motor. The exhibition machine is in its original condition, so you will receive the full warranty. Technical specifications: - Center height 230 mm - Swing diameter 455 mm (with optional external turning attachment 800 mm!) - Center distance approx. 680 mm (extendable!) - Spindle connection M33 x 3.5 (hardened) with ASR (Euro) drain safety groove* - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor 2 HP (connection 230 V) - Weight 178 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €95.00 incl. VAT Itedpfszwt H Nox Acpjn Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Freight shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: Lathe, turning machine, lathe, wood turning lathe, turning, turning tool, wood turning, turning, machine Reference: R-A0117

Condition: used, SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - Control panel - Automatic loader - Maximum working length 300 mm - Min / max working diameter 8/80 mm - Working stations: * automatic loader Iedpfx Aornq Rijcpjtn * turning with n. 2 gouges (roughing + finishing) * 1° shaped knife * 2° shaped knife * unloading

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a like-new ECO DB2 lathe with a center height of approximately 300 mm. Ijdpfxjzw A Tls Acpjtn The exhibition machine is in its original condition, therefore you receive the full warranty. Technical data: - Center height approx. 300 mm - (or approx. 400 mm with extended bed) - Maximum turning diameter approx. 590 or 794 mm - Center distance approx. 508 mm - (or approx. 1,016 mm with extended bed) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Motor 2.2 kW / 3 HP (230 V connection) with frequency converter - 3 speed stages: 20 – 650, 50 – 1,750, 100 – 3,850 rpm - Clockwise/counterclockwise rotation - Headstock and tailstock taper MK2 / bore 10 mm - Tailstock quill travel 120 mm - Indexing 36-step - Hand rest tenon 25.4 mm - Dimensions (L x H x D approx.) 1,565 (2,073) x 1,286 x 765 mm - Weight approx. 250 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related terms: Lathe, turning machine, lathe machine, wood lathe, turning, lathe tool, wood turning, turning, machine Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2005, operating hours: 91,318 h, functionality: fully functional, machine/vehicle number: 040018, rotational speed (max.): 5,000 rpm, controller model: SIEMENS Sinumerik, working width: 120 mm, working height: 260 mm, working length: 360 mm, TECHNICAL DETAILS Working area, X-axis: 360 mm Working area, Y-axis: 120 mm Working area, Z-axis: 260 mm Handling area X/Z: 490/260 mm Maximum spindle speed: 5,000 rpm Spindle bore: 65 mm Spindle diameter at the front bearing: 110 mm Cylindrical spindle nose: ∅ 140 mm Feed force X/Y: approx. 8,000/10,000 N Feed force Z: 10,000 N Rapid traverse rate X/Z/Y: approx. 80/40/7.5 m/min Acceleration X/Z/Y: 7 m/s² MACHINE DETAILS Control system: SIEMENS Sinumerik Power at 100% duty cycle ED, main spindle: 20 kW Torque at 100% duty cycle ED: 105 Nm Power at 40% duty cycle ED: 27 kW Torque at 40% duty cycle ED: 145 Nm Dimensions & Weight Machine dimensions (L x W x H): 2,430 x 2,000 x 2,850 mm Machine weight: approx. 7,500 kg Itjdpfx Aoy T Im Ejcpon Rated power: 20 kW Apparent power: 25 kVA Rated current: 36 A Voltage: 400 V Frequency: 50/60 Hz Operating hours: 91,318 h EQUIPMENT Sliding door: Sheet thickness 5 mm Note: The machine is sold including a small set of accessories!

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Itsdpfozb U Epjx Acpon Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: used, Year of construction: 2001, CNC long-turn lathe Isdpozwk Htofx Acpotn Manufacturer: CITIZEN Type: M32 Year of manufacture: 2001 with: Mitsubishi Meldas control system Synchronous spindle Powered tools Backworking capability Turret C-axis High-pressure pump Oil mist extraction system Fire extinguishing system Bar loader magazine IEMCA BOSS 432 R/37

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00446, turning length: 200 mm, spindle speed (max.): 15,000 rpm, controller model: Fanuc Series 31i, counter spindle speed (max.): 10,000 rpm, Equipment: bar feeder, TECHNICAL DETAILS Maximum bar diameter: 16 mm Maximum turning length: 200 mm Main spindle speed: 15,000 rpm Sub-spindle speed: 10,000 rpm Main spindle drive: 2.2 / 3.7 kW Sub-spindle drive: 0.55 / 1.1 kW Number of axes: X1, Y1, Z1, Z2, C1, C2 Itsdpfx Ajywu Ecscpon MACHINE DETAILS Control unit: Fanuc Series 31i Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,610 x 1,050 mm Machine weight: 1,950 kg EQUIPMENT Fully functional C-axis on both spindles Bar feeder: IEMCA Genius 118 Type 37 LL Guide bushings (complete set) Fixed and driven tool holders High-pressure pump: 20 bar / 2 channels Comprehensive set of guide bushings Bushings for IEMCA bar loader in various diameters

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE Itedpfx Ajy N R A Iscpen For sale is a TEKNATOOL Nova Nebula 230 DVR woodturning lathe with a direct drive ranging from 50 to 4,000 rpm. The demonstration machine is in excellent condition. Technical specifications: - Center height: approx. 230 mm - Maximum distance between centers: 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MT2 (Morse Taper 2) - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-position indexing system - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Forwarding delivery: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related keywords: woodturning lathe, lathe, turning machine, woodturner, woodturning, turning tools, wood spinning, turning, machine Reference: R-A0117

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. Itsdpfxoqwlmqo Acpen speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) Itedjku Aaaopfx Acpon There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, For sale is a used button-turning machine from the manufacturer Hempel. The button-turning machine is fully functional. To avoid any possible misunderstandings, an on-site inspection is possible and recommended after arranging an appointment. The sale is made in the current condition. For used machines, all warranty claims are excluded; the principle of "sold as seen" applies. Now, the mandatory statement: The sale is made with the exclusion of any warranty, liability for defects, guarantee, and right of return. The buyer agrees to this and acknowledges it with his purchase. Liability for damages resulting from injury to health, body, or life, as well as for gross negligence and/or intentional breaches of my obligations as a seller, remains unaffected. Isdpfx Aozyfvnocpjtn

Condition: excellent (used), Year of construction: 2008, turning diameter over bed 32 mm Iedsvwgmyopfx Acpstn spindle passage 32 mm turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 clamping diameter 32 mm spindle turning speed range 7000 U/min workpiece length - max. 150 mm feed 0 - 2000 mm/min weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 4,000 mm Turning height: 1,400 mm Iodpfxjz Dif Es Acpjtn Travel range of the rotary table: 850 mm Max. swing diameter, approx.: 4,200 mm Turning diameter - external, max.: 4,000 mm Travel range of the cross slide: 850 mm Ram stroke - max.: 950 mm EQUIPMENT - Hydraulic chuck - Tool holder CAPTO 6 - Electric handwheel - Retrofit in 2007 INCLUDES Chip conveyor 4-position tool turret DESCRIPTION The machine is in very good condition and was used for hard turning of 4m cylindrical roller bearings. In 2007, the machine underwent mechanical refurbishment by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, travel distance X-axis: 535 mm, travel distance Z-axis: 3,845 mm, total height: 1,850 mm, total width: 2,105 mm, type of input current: three-phase, spindle nose: A2-15, Equipment: documentation/manual, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Isdpfxjz S Ncuo Acpotn Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Isdpfjy Avyxox Acpotn Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Röhm chuck 125mm documentations

Condition: used, Year of construction: 2007, functionality: fully functional, HWACHEON HI TECH 200 B FANUC CONTROL MAX TURNING DIA 350 MM MAX TURNING LENGHT 400 250 MM HYD 3 JAW CHUCK TAILSTOCK SLOTTED TURRET Iodpfx Ajz N Dflscpstn YEAR 2007 TOOL SETTER