Used Digital Colour Press for sale (21,506)

Condition: excellent (used), Year of construction: 2004, operating hours: 76 h, machine/vehicle number: HF112305, Size 47 x 66 cm, Console DTC (Sakurai Delivery Top Console) with Touch Screen, Full Remote Control Operation, SIS (Sakurai InterActive System) for make-ready, Plate Running Register system, SAS (Sakurai Auto Set) for paper size and thickness, SPC (Semi-automatic Plate Change), Cocking Register, Automatic Washers: Blanket Cylinders & Inking Rollers, Olivermatic Dampening, Baldwin Refrigeration System & Bal Control, Feeder with Suction-belt feed table, Electronic Double Sheet & Side Lay Detector, Chromed Impression Cylinders, Perfector 4/0 - 2/2 (Fully automatic), Semi-High Pile delivery, Powder Spray. Bwsdjzubgropfx Ab Djt

Condition: ready for operation (used), Year of construction: 1969, Pressing force: 3 t Mandrel diameter: 80 mm Bore: 15 mm Stroke: approx. 550 mm Overhang: 250 mm Bwodpfx Abjzh Ibpe Det Table size: 300 x 370 mm Cutout in the table: 85 mm Footprint: 1000 x 800 x 2000 mm Weight: 260 kg

Condition: excellent (used), functionality: fully functional, Manufacturer: Šmeral Type of machine: Hot forging press Rated pressing force: 1,000 t Ram stroke: 220 mm Stroke rate: 100 strokes/min Table size: 995 × 950 mm Ram adjustment: 10 mm Bodpfx Abozxhzws Dewt Stroke of upper ejector: 35 mm Drive power: 40 kW Weight: approx. 45 t

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250008, functionality: fully functional, operating hours: 500 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included Bedpfjzymb Ssx Ab Dowt 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: used, Maximum pressing force: 3,150 kN Stroke rate: 15-80 strokes/min Ram adjustment: 10 mm Stroke: 200 mm Voltage: 400 V Motor power: 30 kW Connected load (total power): 65 kW Bwodpfx Abszwf Tne Det Weight: approx. 17,000 kg Two-hand safety distance: 198 ms

Condition: used, Second-hand machine Second-hand pneumatic frame press from Maweg MNo.: 7004124588 Bwjdpfjzk Nwkjx Ab Det Pressing area: Length approx. 3500 mm / Height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Availability: by arrangement Location: Röllbach

Condition: like new (used), Year of construction: 2020, Like new press brake from Ermaksan Type: Power-Bend Pro 3100 135 Capacity: 3100 x 135 tons Bedpfszunlhsx Ab Djwt Delem DA56s CNC control Y1, Y2, and X axes CNC controlled Akas Fiessler laser safety system Amada/Euro clamping system Manual crowning Includes a set of tooling

Condition: good (used), Year of construction: 2005, Gebruikte 3-meter CNC-kantbank van Safan Model: H Brake 120 3100 Bouwjaar: 2005 Capaciteit: 3100 x 120 ton CNC-besturing van de Y1, Y2, X, XDelta, R, Z1 en Z2 assen WILA nieuwe standaard gereedschapsklem Geüpgrade ESA grafische controller Bjdpfxjzul Ero Ab Dswt Lazersafe lasersysteem

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Bwsdpfx Aezulx Eob Dst Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: excellent (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. Bwodpfx Ajzlixqob Djt The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Main features Manufacturer: TTK Model: FG-SYS Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication JBUS/MODBUS connection for BMS integration Lockable metal enclosure The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes

Condition: excellent (used), Year of construction: 2017, Uncompromised performance and precision: The G3 digital cutting system is based on the most flexible, adaptable, and easily expandable machine concept on the market. Operating hours 2.700 Tools Camera New PC - touch screen UCT KCT EOT-250 CTT1 Bodpfxezu Av Uo Ab Dowt CTT2 VCT Router 1Kw Diverse Creasing wheels Diverse perforating knives Belt replaced in 2025 Zund Cut Center updated 2026 Vacum pump replaced in 2026 In production, demo possible upon request

Condition: excellent (used), Year of construction: 2017, AGFA Anapurna H2050i LED VERSATILITY. PRODUCTIVITY. QUALITY. A powerful 2.05 m hybrid UV LED printer for high-quality graphics production. One printhead needs replacement Only 975 hours printed, aqcuired from show room Under production, demo possible Bwjdpfx Aezu Audjb Djt 2.05 m print width Up to 104 m²/h UV LED curing technology Hybrid: rigid + flexible media Up to 3.2 m rigid-media length Up to 45 mm substrate thickness CMYK + Light Cyan + Light Magenta + White Up to 720 × 1,400 dpi Konica Minolta KM1024i printheads White ink for high-impact applications For further technical details refer to enclosed brochure

Condition: excellent (used), Year of construction: 2018, The Agfa Jeti Tauro H2500 LED is a 2.54 m hybrid flatbed/roll-to-roll UV LED inkjet printer. Colour configuration: CMYK Lc Lm + White + primer (6c W4 P2). Bodpfxjzuzm Sj Ab Dowt Under Premium care service contract. Perfect working conditions. Only 3.500 hours of print. The high-performance UV LED printer for demanding large-format production. 2.54 m print width Up to 275 m²/h UV LED technology Hybrid flatbed + roll-to-roll Up to 1,200 dpi CMYK + Light Cyan + Light Magenta Optional White & Primer Print on rigid and flexible media Designed for high-volume, industrial production One machine. Endless possibilities. From signage and displays to POS, retail graphics, décor and banners, the Jeti Tauro H2500 LED delivers high-quality results with exceptional productivity. For further technical specifications please refer to attached brochure.

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow Bsdpjgvkmrefx Ab Djwt adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: used, The scope of delivery includes: 01x shelf grate, used Material color: hot-dip galvanized Total depth: approx. 2,520 mm (support bar direction) for double shelf rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Total width: approx. 1,120 mm (cross bar direction) Support bar dimensions: 30|1.50 mm Frame height: approx. 30 mm Mesh width: approx. 68 x 45 mm Weight | piece: approx. 30.83 kg Internal designation: GR-114 Note: The grate may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Bwedpfxovvhglo Ab Dot General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm Bwodpfx Abjyzd I Uj Det -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: as good as new (ex-display), Year of construction: 2024, pressing force: 80 t, Equipment: documentation/manual, YAWEI SKE1-80 Precision Servo Press – 800 kN / 80 t - Stock Machine - Demo Machine - Available immediately For sale is a YAWEI SKE1-80 precision servo press from the manufacturer Jiangsu Yawei Machine Tool. This servo press is suitable for precise punching, forming, and pressing operations and, thanks to the servo drive, allows for freely adjustable motion and pressing curves. Speed, position, and the pressing process can be controlled precisely. Manufacturer: YAWEI / Jiangsu Yawei Machine Tool Model: SKE1-80 Pressing force: 800 kN / approx. 80 t Bwjdpfxozyamzo Ab Dot Ram stroke: 150 mm Idle stroke rate: max. 65 strokes/min Working stroke: 6 mm Max. tool installation height: 330 mm Ram adjustment: 80 mm Ram area: 560 × 460 mm Table area: 1,000 × 600 mm Table thickness: 120 mm Operating pressure: 0.55 MPa Peak torque: 4,000 Nm Drive: Servo motor / Gear drive

Condition: new, Year of construction: 2026, pressing force: 220 t, Equipment: documentation/manual, safety light barrier, New, immediately available, top-spec CNC press brake YAWEI PBH220/3100-7C - Pressing force: 2200 kN - Max. bending length: 3100 mm - Year of manufacture: 2026 - CNC-controlled hydraulic crowning - Cybelec DELEM DA66 control system Bsdpfx Abezyafko Dowt - WILA upper tool clamping - Controlled axes: X, R, Y1/Y2, Z1/Z2, Delta X - Servo bending aid (up to 200 kg) - 60 mm table with 13.5 mm x 22 mm slot for insert dies - 2 front support arms, adjustable on linear guides - CE compliant with Fiessler AKAS IIF (automatic height adjustment) - 24-month warranty - Commissioning and training included

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20 h, functionality: fully functional, 2010 RYOBI 752P (Wide) Two-Color Reversible Printing Press Reversible Printing: 1+1 / 2+0 Maximum Sheet Size: 600 x 788 mm Maximum Speed: 15,000 Sheets Per Hour Paper Thickness: 0.04 – 0.6 mm Only 20 Million Impressions! Year: 2010 Equipped with: PCS-G Printing Control System Ryobimatic Dampening System Technotrans Alpha.d Refrigeration Unit IVS Ink Volume Setter Suction-Tape Feeder Table Semi-Automatic Plate Changer Automatic Roller Washer Automatic Blanket Washer Automatic Impression Cylinder Washer Automated Reversible Printing Unit Changeover Sheet De-Curler Steel Plate in Feeder and Delivery Grafix Digital 3000 Powder Spray Device Bodszxp Sqepfx Ab Dewt High-Pile Delivery Cylinders are Damage-Free Rubber Rollers in Very Good Condition Spare Parts List & Manual Machine Tools

Condition: used, Year of construction: 2008, functionality: fully functional, 1 x used 72/80-page web offset printing press Manufacturer: manroland Model: Lithoman IV Year of construction: 2008 Web width: 2060mm Section length: 620mm Cylinder circumference: 1240mm Max. speed: 42,500 cph Running direction: left-to-right Description: 1 x web winder MEGTEC DLC 3200 with web feed AUROLOAD 4 x printing units manroland with PPL and Baldwin Impact Fusion blanket washing system 1 x dampening system technotrans delta.d 400W 1 x hot air dryer Contiweb Ecoset/T 15.3m with integrated afterburner (retrofitted in 2020) 1 x ink density control system GMI ColorQuick 1 x cut register control manroland CutCon 1 x color register control manroland Bwjdpfx Aozvyxceb Dst 1 x superstructure with 5 lay units 1 x 2nd feeder (baby feeder) 1 x folding unit PFI 5S, 2:5:5 with positive feeder and magnetic brake (MT folding) 1 x saddle stitcher Tolerans 1 x cooling unit Axima i-Cool 1 x control system PECOM-X optional: 1 x disposal line RIMA System with cutting modules RS840, cross-lay unit RS36S and RS400 robot/palletizing system

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 10, number of print heads: 2, EPSON SureColor S80600 10,000 m² Caldera RIP Bjdjym A Uvspfx Ab Djwt 2 new print heads, less than 10 months old. In very good condition. We can prepare it for transport and crate it on request. Price available upon request.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 100 t, stroke length: 200 mm, Equipment: CE marking, safety light barrier, For Sale: Bystronic Xact 100 CNC Press Brake (3.1m x 100T) Bedpezta A Aofx Ab Djwt Available immediately: A exceptionally clean, well-maintained Bystronic Xact 100 CNC Press Brake (2012 Model). This free-standing, down-stroking machine offers precision 4-axis bending with automated crowning, making it an excellent addition to any precision fabrication facility. Detailed technical specifications and machine configurations can be verified through the Bystronic Official Group Website. Machine Overview & Configuration Control system: Equipped with a Cybelec DNC 880S Control unit. Axis configuration: 4-Axis control plus crowning (Y1, Y2, X, R + Manual Z). Safety systems: Integrated Fiessler Laser Guards for optimal operator protection. Guarding package: Features full rear sliding screen guards and side guards. Wandering foot pedal/pedestal controls. Technical Specifications Parameter Measurement Bending Capacity1000 kN (100 Tonne) Working Length3100 mm Distance Between Frames2550 mm Throat Depth400 mm Maximum Stroke200 mm Rapid Approach Speed100 mm/s Working Speed1 – 10 mm/s Return Speed95 mm/s Overall Weight9000 kg Machine Identity Manufacturer: Bystronic Model: Xact 100Year of Manufacture: 2012 (Model Year 2012)

Condition: new, Year of construction: 2024, Advantages Bjdpjbpg E Ejfx Ab Dewt - Compact design, space-saving - Powerful, high extraction capacity, low operating costs - Easy to maintain, long filter life - Universally applicable, variable accessories - High flexibility - Mobile design - Extraction technology with front plate system Technical data: Motor rated power: 0.75 kW / 2.1 kW Motor speed: 960 / 1430 rpm Airflow: 6,800 m³/h Filter area: 2 m² (2 x 1 m) Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248 kg

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Bwedotnz Hbopfx Ab Det Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Bwjdpfxoxgvwpj Ab Det Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -