Used Drill Press Machine for sale (68,324)

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm Gusdpfx Aozcdxnsnljc z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Guedpfx Aszcdwqjnloc Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm Godpsy R N Ilofx Anlouc * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Gusdpfewbvmiox Anlec Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm taper MK 4 table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW Gujdpfxoy T Sdho Anljc weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Gusdpfx Ansqa Txqsljc Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Guedpfeu T Ty Hex Anlsc Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. Gusdjikrtqjpfx Anljc good condition

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine Gjdpfxjgd Ipkj Anleuc make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed Godpjnzt A Hofx Anljuc - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Gedpsfbt Huefx Anlouc Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Gsdpfxshmmfkj Anlsuc Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions Gujdsi Db Ibjpfx Anlsc The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Godperzfh Hofx Anljuc Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Guodpfx Anevvi I Reljc

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Godpfx Anovvi Auelsuc Storage location: Nattheim

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) - Infeed and outfeed: 2900 mm - Glass thickness: 3-30 mm - Overall length: 6000 mm - Width: 2000 mm - Height: 2200 mm Gedpfx Aneyuiwasleuc - Condition: As new - Year of manufacture: 2011

Condition: good (used),

Condition: good (used), Internal article no.: 24035 Column drilling machine Solid TB15 2 speed settings Left-right rotation Spindle holder: MK2 Quill stroke: 100mm (with adjustable depth stop) Speed adjustable via belt. Speed levels unfortunately not visible. (Presumably up to 4000 rpm) Table: 320 x 260mm Dimensions (LxWxH): 60 x 40 x 170cm Godpfxett Ahpo Anleuc Weight: approx. 300Kg

Year of construction: 2022, condition: excellent (used), Machine for producing pressed pâtés, semi-hard and hard Guedpfxoxf I I Do Anlec

Condition: used, Year of construction: 1976, machine/vehicle number: 5591, bore capacity in steel (diameter):13 mm throat:185 mm bore stroke:70 mm taper MK:Bohrfutter 1 - 13 mm turning speed range:400 - 4000 U/min speed steps work spindle:6 table surface area:200 x 250 mm Gusdpfxocxxvbj Anlec distance spindle /table:170 mm column diameter:65 mm total power requirement:0,22 kW weight of the machine ca.:0,08 t dimensions of the machine ca.:0,75 x 0,3 x 0,65 m

Condition: used, bore capacity in steel (diameter):10 mm throat:190 mm Guedpfxoh Ra Nxs Anlsc bore stroke:65 mm total power requirement:0,5 kW weight of the machine ca.:0,05 t dimensions of the machine ca.:0,3 x 0,7 x 0,7 m column diameter:80 mm machined bearing plate::Ja table surface area:300 x 250 mm height adjustment:0 - 280 mm speeds:950 - 2000 U/min

Condition: used, bore capacity in steel (diameter):5 mm throat:100 mm bore stroke:30 mm voltage:220/380 V Gusdpfecxxmlsx Anlec turning speeds:2820 U/min clamping table:170 x 120 mm workpiece height max.:120 mm total power requirement:200 W weight of the machine ca.:35 kg dimensions of the machine ca.:0,25 x 0,43 x 0,5 m

Condition: new, Main Motor Power: 5.5 KW, 380 V Gjdpfx Aey T H S Hsnljuc Operating Type: Hydraulic Operating Type: Geared Coolant Pump Power: 90 W Drilling Capacity: 63 mm Spindle Taper: MK5 Spindle Stroke (Spindle Travel): 400 mm Spindle-Column Distance: 450-2050 mm Spindle-Table Distance: 400-1600 mm Column Diameter: 450 mm Speed: 20-1600 rpm Number of Steps: 16 Table Size: 950x630x500 mm Spindle Feed: 0.04-3.2 mm/rev (16 steps) Machine Size: 2900x1250x2500 mm Dimensions (L x W x H): 3110x1250x3150 mm Net Weight: 6800 kg Gross Weight: 7150 kg

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 21 Total number of tool changer positions: 77 Gedpfsy Nx Ufex Anljuc