Used Emco Bs 3 for sale (116)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 75 mm, turning length: 325 mm, turning diameter: 180 mm, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, TECHNICAL DETAILS Swinging diameter over bed: 180 mm Swinging diameter over cross slide: 75 mm Nsdpfx Abozb Ekceujlh Turning length: 325 mm Travel in X-axis: 56 mm Travel in Z-axis: 176 mm Spindle speed range: 20 - 6,300 rpm Spindle bearing diameter in the front bearing: 50 mm Feed force in Z-direction max.: 3,000 N Spindle bore: 30 mm MACHINE DETAILS Control system: Fanuc 21T Main spindle power max.: 3.7 kW Voltage: 400 V Frequency: 50-60 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,620 mm Machine weight approx.: 1 t EQUIPMENT Automatic chuck Various accessories Interface for bar feeder

Condition: used, Year of construction: 2000, Technical details: Njdpfx Abox Dcgxsuelh turning diameter: 360 mm turning length: 520 mm total power requirement: 20 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m

Condition: used, Year of construction: 2001, Technical details: turning diameter: 220 mm turning length: 700 / 665 mm total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 Nlsdpfx Ajx Aq Hkjbush slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, number of axes: 3, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s Nledpfx Asyffgrebueh • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,955 h, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, spindle motor power: 3,700 W, total width: 1,700 mm, overall weight: 1,400 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, product length (max.): 1,270 mm, number of axes: 2, Horizontal turning machine manufactured in 2014. This EMCO E25 features a maximum turning diameter of 85 mm and a maximum turning length of 225 mm. It includes a VDI 16 disk turret with 12 tool stations and a rapid traverse speed of 15 m/min in the X-axis. If you are looking to get high-quality turning capabilities, consider the EMCO E25 machine we have for sale. Contact us for further details. • Spindle motor power: 3.7 kW (5.5 kW at 40% duty cycle) • Spindle speed range: 60 - 6300 rpm (infinitely variable) • Feed Force: 3000 N / 3500 N • Rapid Traverse: 15 m/min / 24 m/min • Number of tool slots: 12 • Main electronic connection: 400 V (3/PE) • Power consumption: 6 kVA • Chip conveyor: Included • Swing over bed: 250 mm • Max. Turning Diameter: 85 mm Nsdpfozk Ep Njx Abuelh • Max. Turning Length: 225 mm • Max. Bar Capacity: 25.5 mm • Distance between centers: 405 mm • Spindle Connection: Ø 70 h5 • Max. Chuck Size: Ø 100 mm • Max. Torque: 35 Nm • Turret Type: VDI 16 disk turret with directional logic • Tool Shank Cross-section: 12 x 12 mm • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Optional We can also offer a bar loader from another customer for an extra amount. Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: good (used), Hardness tester, fully functional Upon request, transport and loading can be organized throughout Europe at an additional cost. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your equipment? For further information or contact options, please reach out via the contact form. Nljdpfx Abjzvfd Roueh

Condition: used, Year of construction: 2008, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2008 Control : Siemens 840D - Powerline Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Röhm KZZT-AF 65/6 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, Röhm KFD-HE 210 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Toolmeasurement:Automatic Measuringarm, Marposs Rawmaterialfeed:Barloader, EMCO TOP-Load 10-65 (TOP Automazioni ETL 10-65) Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, Bristol EF David Nljdjz Hh A Ijpfx Abush Toolholder:Misc. static and driven toolholder Further Equipment:Spindlechiller

Condition: used, weight approx.: 450messurements (LxWxH): 1250x1350x1550y-travel: 300z-travel: 200x-travel: 350speed range: 80-2200table diamension: 600x200 Description:  Nljdjrgvbpjpfx Abueh -)coolant equipment -)machine lamp Revs80 – 2200 (8) r.p.m.TaperDIN2078 ISO30 (Anzugsschraube M12)Working area300 x 200 x 350 mmTable600 x 200 mmFeeds stepless X,Y range20 – 200 mm/id traverse X,Y range1200 mm/ll travel45 mmMax. feed force1600 NmSpindle motor1,1/1,4 kWvertical table600 x 200 mmDistance vertical milling spindle - milling table20 – 370 mmDistance horizontal milling spindle - milling table84 – 434 mmFeed in X-axis (stepless)20 – 200 mm/minLength1250 mmWidth1350 mmHeight1550 mmWeight450 kg

Condition: good (used), Year of construction: 2011, operating hours: 18,000 h, functionality: fully functional, turning length: 740 mm, turning diameter: 430 mm, spindle bore: 65 mm, travel distance X-axis: 280 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, bar passage: 65 mm, overall weight: 8,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Turn-milling center EMCO HYPERTURN 665 MC Plus Year of manufacture: 2011 Control system: Sinumerik 840D Operating hours: 18,300h (according to hour meter) Technical data: Main spindle speed: 0 - 5,000 rpm Drive power: 21/29 kW (100/40%) Torque: 250 Nm Spindle mounting: KK6 Bar diameter: 65 mm Counter spindle speed: 0 - 7,000 rpm Drive power: 17/21 kW (40/100%) Torque: 130 Nm Spindle mounting: KK6 Milling spindle speed: Mounting: Capto C4 Number of magazine positions: 23 Travel ranges: X1/Z1: 280/750 mm X”/Z2: 205/750 mm Y-axis: +/- 50 mm Nsdpfx Absz Tc Umouelh Lower turret: Mounting: VDI 30 Number of positions: 12 Number of powered tools: 12 Accessories: - Emco short magazine LM 1200 - Chip conveyor - High-pressure coolant system - Parts catcher - Extensive equipment with tool holders

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. Nodpfjwag Stex Abuslh

Condition: used, Year of construction: 1998, • CNC machining centre Emco, Type VMC 600, year of manufacture 1998 • incl. handwheel + 3 vices with clamping devices Nledpfoyucbfex Abuoh

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,848 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details. • Axes: 4 (standard) + optional 5th axis • Spindle: Kessler • Operating hours: Control ON 36,839 h; Machine ON 21,370 h; Program run 11,122 h; Spindle ON 9,848 h • Electrical: 400 V, 3 phases, 50 Hz, nominal current 50 A, largest load current 30 A, breaking capacity 16 kA • Protection grade: IP54 • Electrical cabinet weight: 220 kg • Cooling: Coolant system with belt filter (MicroMag filtration unit visible) Additional equipment • Chip conveyor • Wired electronic handwheel Nsdpfx Asywyq Debujlh • Lehmann rotary axis with rocker and counter bearing • Zeroclamp zero-point clamping system • Retrofitted electrical cabinet cooling unit (Rittal) • Nikken rotary table Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Njdpfx Aswkpzlebujlh Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Nsdpfx Aboxp Hudjuslh

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Nsdpfx Abjyxxhqeuelh

Year of construction: 1998, condition: new, New trapezoidal screw and nut for the X-axis, for FN20, FN32, FN40. Nedpfx Absk Nk Iwjuslh

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,000 rpm, total length: 1,000 mm, total width: 800 mm, spindle mount: MK 2, type of input current: three-phase, The three-phase 380-volt motor is running smoothly. Geared headstock, with gears running in oil. Six spindle speeds are adjustable from 120 to 2000 RPM. Head height and angle are adjustable. MT2 spindle taper. Power table feed with three adjustable feed rates: 33-65-170 mm/min. Maximum distance between table and spindle: 375 mm. Cross table dimensions: 630x150 mm. Adjustable LED machine light. Emergency stop switches. Overall in good condition. Nsdpfx Ajzycprjbuolh Made in Austria. Dimensions: 80x100x185 cm. Includes all accessories as shown in the pictures, located on the floor next to the machine. Contact us for shipping options! €2,650.00

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 77 mm, turning diameter: 520 mm, center height: 260 mm, turning length: 1,500 mm, feed length X-axis: 310 mm, feed length Z-axis: 1,500 mm, spindle speed (max.): 2,500 rpm, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 4 m/min, spindle mount: MK 6, EMCO LABOR E-260 SELF-LEARNING LATHE WITH FAGOR 8055 CNC, COMPLETE MACHINE WITH ACCESSORIES, MANUALS, AND CE DECLARATION CENTER HEIGHT: 260 mm DISTANCE BETWEEN CENTERS: 1500 mm Nljdpfx Ae Aa Nicebuoh MAXIMUM DIAMETER OVER BED: 520 mm MAXIMUM DIAMETER OVER CARRIAGE: 300 mm SPINDLE NOSE, CAM LOCK TYPE: 6" SPINDLE BORE DIAMETER: 77 mm SPINDLE POWER: 16.5 KW SPINDLE SPEED: 2500 RPM (2 RANGES) CNC: FAGOR 8055 MOTORS AND DRIVES: SIEMENS

Year of construction: 1992, condition: new, New ISO40 collet for FN 20/32/40 milling machines. Nlsdpfxjk Nk I No Abueh

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Additional options & accessories: - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). Nlodpszcplyofx Abush - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered).

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: R6L211501, EMCO Turn S65 TM – 2-axis CNC lathe with EMCO SL1200 short bar loader - 2-axis CNC lathe without tailstock, featuring driven tools and C-axis - 18 kW drive power - 0–4,200 rpm spindle speed - Linear guideway system - Digital drive technology - Direct spindle encoder - Sinumerik 828D with ShopTurn conversational programming Equipment - 12-position VDI 30 axial tool turret with direction logic for up to 12 live tooling stations (5 kW, 20 Nm, 0–5,000 rpm) - C-axis for main spindle - Mechanical spindle brake (minimum increment 0.01°) Nledpoyzn H Uofx Abujh - Size 65 headstock with KK6 spindle nose (DIN 55026) - Hollow clamping cylinder incl. draw tube - Machine lamp - Coolant system - Hydraulic power unit - Interface for chip conveyor - Documentation Other features - EMCO SL1200 short bar loader ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing solutions adapted to your needs. Whether down payment, installment plans, or individual financing models – together we will find a solution that fits. If you wish, we can also handle the complete logistics and transportation. From planning to punctual delivery, we ensure a smooth and reliable process, so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide personal and professional advice. ----- Subject to prior sale, errors, and changes.

Year of construction: 2007, condition: used, X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible. Nlsdpfx Aoz Sr Nwebuoh

Condition: excellent (used), Year of construction: 2010, MaXXturn 65 SMY (Siemens) CNC TURNING CENTER FOR COMPLETE MACHINING WITH POWERED TOOLS, C-AXIS, AND Y-AXIS Linear guide system, digital drive system. Spindle motor (ISM) on the main and counter spindle with thermal compensation system (liquid-cooled). State-of-the-art control technology SINUMERIK 840D with ShopTurn dialog programming. Main spindle: A2-6" connection (DIN 55026) * Drive power: 29 kW * Speed range: 0-5000 rpm Counter spindle: A2-6" connection (DIN 55026) * Drive power: 22 kW * Speed range: 0-7000 rpm Tool system: * 12-position tool turret VDI 30 radial, with direction logic for up to 12 powered tools * Power: max. 6.7 kW * Torque: max. 25 Nm * Speed range: 0-5000 rpm * C-axis on the main and counter spindle Y-axis: * Travel range: +/- 40 mm * Rapid traverse speed: 12 m/min Includes: * Coolant unit for spindle head * Hollow chuck incl. draw rod * Sinumerika 840D/PCU20 control * SHOPTURN dialog programming * RS 232 interface * Machine light * Coolant system incl. coolant pump 3.5 bar * Chuck flushing (additional pump (3.5 bar)) * Part ejector and flushing through the counter spindle * Control cabinet air conditioning * Hydraulic unit Nlsdpfjz Sq Sdsx Abuoh * Interface for chip conveyor * Documentation * CE certificate Machine no. S6AY1202 Year of manufacture: 2010

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,215 mm, overall weight: 620 kg, controller manufacturer: SIEMENS, controller model: Sinumerik ONE, number of slots in tool magazine: 40, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump Nledpfxsx D E Hbs Abueh • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Tool Milling Machine Emco C40 Linear with Digital Display and Path Control – Excellent Condition, Tool Holders, CE-Compliant! Technical Data: >> Year of manufacture: 2009 Machine No.: BA1GX1201 >> Milling table clamping area: 800 x 400 mm Number of T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 taper >> Manual drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main drive motor: 7 kW Nodpfx Aboyliffsuelh >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Folding machine enclosure >> Coolant system >> Machine lamp >> Tool trolley with tool holders About the machine: Offered is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in an almost mint condition. It comes from a government facility where it was only used minimally. The control system is very user-friendly. Switching from vertical to horizontal operation is very easy by simply swivelling away the vertical head. The Emco has been mechanically and electrically tested by us. Take the opportunity to view and test the machine under power at our facility.