Used Emulsion for sale (284)

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers Bwedpfjchqxxox Aihep + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: reconditioned (used), Year of construction: 2023, All wear parts are new. Only 704 operating hours. Special price for a lightly used demonstration unit. Base machine: €29,990 net. Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable, cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality during continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Bjdpfod N Dnhex Aihowp Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compaction via sliding plate. Main press cylinder. Vertical cylinder. . Level sensor: yes. . Requirements for the raw material: - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg. - The feed material must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: used, Year of construction: 2010, functionality: unexamined, Offered is an emulsion coolant system with a belt filter. Bsdpfx Aev N U Ezsihswp Year of manufacture: 2010, flow rate: 500 l/min, power consumption: 21.2 kW. Further specifications can be found on the nameplate.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MULTIMILL 1000 by EDEL Werkzeugmaschinen GmbH New-machine quality at a price that takes the pressure off your costing. The MULTIMILL 1000 is a 5-axis all-rounder with turning capability, mastering milling and turning in a single setup. Proven EDEL technology, combined with our complete factory refit procedure: every assembly overhauled, all wear parts renewed, fully measured and backed by factory warranty. Technical specifications: 1 5-axis milling machine EDEL MM1000 X/Y/Z: 1,000/800/700 mm 1 NC universal milling head M21 B-axis, (-)10° to (+)187°, 900/1,680/4,000 Nm, 330°/s, (55 rpm) 1 Milling spindle CS-21-180-A Bwsdepiqzkjpfx Aihep 21/32 kW, 100/130 Nm, 18,000 rpm, HSK-A63 1 NC rotary table CRT/1000/H/HT 960/2,048/4,000 Nm, 570°/s, (95 rpm), 20,000 N (centric) Face plate diameter: 900 mm 1 Heidenhain TNC 640 5-axis contouring control electronic handwheel HR 510 DXF converter CAD viewer KinematicsOPT enhanced energy efficiency 1 Remote service 1 Extraction unit for oil and emulsion mist filter systems, capacity approx. 2,000 m³/h cascaded filtration 1 Coolant/lubricant system 950 litre tank capacity External coolant supply: 30 l/min / 20 bar Through-spindle coolant: 20 l/min / 50 bar Wash-down gun: 40 l/min / 2 bar 1 Workpiece measuring system Touch probe BLUM TC 60 BRC radio technology 1 Tool changer HSK-A63 / 52 pockets Tool diameter 75/130 mm Tool length 300 mm Tool weight 8 kg 1 Chip conveyor Hinge belt / scraper belt conveyor 1 Switchable external air cooling (coolant / air) Coolant: 20 bar / Air: 6 bar 1 Turning technology package Machine control Heidenhain TNC 640 Rotary table CRT/1000/H/HS Tool interface HSK-A 63 Spindle clamping device Tool measuring system for turning tools 1 Switchable internal through-spindle cooling (coolant / air) Coolant: 50 bar / Air: 6 bar 1 Tool changer HSK-A63 / 80 pockets INSPECTION AND DEMONSTRATION AVAILABLE AT ANY TIME Arrange an appointment at our plant, and we will show you the machine in live cutting operation.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Röders RXP600DSH - HSK63F spindle max. 30,000 rpm - 24-position tool changer - Emulsion cooling with 40 bar internal coolant supply (IKZ) - Extraction system - Laser tool measurement - 3D probe - Thermal package - Prepared for automation Bwsdpox I A Imjfx Aihjp The machine is already at our facility in Soltau. We will upload pictures shortly.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0118703/99-1, functionality: fully functional, power: 55 kW (74.78 HP), input voltage: 400 V, type of input current: DC, volume flow: 1,200 m³/h, intake manifold diameter: 150 mm, filter area: 8 m², For sale is a Bristol 'TF' B 250 extraction unit. The item is in good condition and is ready for immediate use. Device type: Extraction unit Model: BRISTOL 'TF' B 250 Motor power: 0.55 kW Airflow: 1,200 - 1,500 m³/h Connection voltage: 400V / 50Hz Extraction spigot diameter: 150 - 200 mm Application areas: Oil mist, emulsion mist, dust Year of manufacture / Serial number: 1999 / 0118703/99-1 Bsdpfxey R Ax Rs Aihewp Transport and loading can be organized throughout Europe at an additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-Axis: 2,032 mm Travel Y-Axis: 750 mm Travel Z-Axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Increased spindle power: 26 kW Increased torque: 1,067 Nm MACHINE DETAILS Control system: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h EQUIPMENT Measuring probe (manufacturer: Renishaw) Chip cart 47 SK50 tool holders, including approximately 25 Weldon holders Bsdpfx Aoy Hkhrjihjwp Emulsion cleaning unit

Condition: used, Stephan MC12 Microcutter is a compact and efficient machine designed for fine grinding, emulsifying, and homogenizing a wide range of food products. Thanks to its Microcut technology, it delivers highly precise processing and a uniform product structure. Manufactured from high-quality stainless steel, it ensures excellent hygiene standards, easy cleaning, and long-term reliability. Its compact footprint makes it an ideal solution for small and medium-sized production facilities where space optimization is important. The machine is suitable for producing emulsions, pâtés, sausage mixtures, spreads, and other food products that require fine and consistent processing. Technical Specifications Manufacturer: Stephan Model: MC12 Capacity: 40 l Power: 9 kW Power Supply: 400 V / 50 Hz / 3N Processing Capacity: up to 1200 kg/h Cutting Speed: 2900 cuts/min Dimensions (L x W x H): 700 x 630 x 1000 mm Bjdpfx Aijzgpbzshswp Weight: 120 kg

Condition: used, Rex Hydro Cutter 65 is a professional bowl cutter designed for meat processing and the production of emulsions, sausages, pâtés, and other food products. Equipped with a 65-liter bowl and a six-knife cutting system, it delivers fast, precise, and consistent chopping and mixing performance. The machine is manufactured from high-quality stainless steel, ensuring durability, easy cleaning, and excellent hygiene standards. It features two knife speeds and two bowl speeds, allowing operators to adapt the process to different products and production requirements. A stainless steel cover and additional noise-reducing protection contribute to safe and comfortable operation. Powered by an 18 kW motor, the Rex Hydro Cutter 65 provides reliable performance and high productivity for small and medium-sized meat processing facilities. Bwedpfx Aijzgn Tvjhep Technical Specifications Manufacturer: Rex Model: Hydro Cutter 65 Bowl Capacity: 65 L Number of Knives: 6 Knife Speeds: 2 Bowl Speeds: 2 Motor Power: 18 kW Power Supply: 400 V / 50 Hz Dimensions: 1350 × 900 × 1300 mm Construction: Stainless Steel

Condition: new, functionality: fully functional, power: 10.4 kW (14.14 HP), gearing type: other, fuel type: diesel, color: green, axle configuration: 1 axle, emission class: none, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB BM Combo – Two Machines in One. Maximum Efficiency on Every Road Project. The TICAB BM Combo is a powerful dual-function bitumen machine engineered for professional road construction and maintenance. It combines a 750 L bitumen emulsion sprayer and a 120 L crack sealing unit in one compact, trailer-mounted solution — giving contractors and municipalities everything they need to work faster, smarter, and more profitably. 🚀 Why TICAB BM Combo Increases Your Profitability ✔ 2-in-1 System – Save money by replacing two separate machines with one high-performance unit ✔ Faster Job Completion – Spray and seal with maximum efficiency ✔ Precise Application – Uniform coverage ensures professional results ✔ Reduced Operating Costs – Diesel engine with hydraulic system for reliable, energy-efficient operation ✔ Built for Heavy-Duty Work – Designed for demanding municipal and industrial projects Key Advantages 750 L bitumen emulsion sprayer + 120 L crack sealing unit Diesel-powered engine with integrated hydraulic pump & heating system Automatic temperature control for optimal material performance Hand wand and wide spray bar for flexible application Bwsdpfx Aox U Am Nsihsp Flushing system for easy cleaning and maintenance Fully mobile, trailer-mounted design for quick transport between sites Rugged construction for long-term, intensive use Ideal For: Road and highway construction Asphalt paving preparation & tack coat application Pothole repair and crack sealing Surface dressing & waterproofing Municipal roads, parking lots, industrial zones, airports, bike paths, and more Why Choose TICAB? Manufactured by TICAB – a trusted European road equipment brand, the BM Combo is engineered for professionals who demand reliability, efficiency, and long-term performance. With one machine, you reduce equipment costs, minimize downtime, and maximize productivity — all while delivering flawless asphalt and bitumen application. 📞 Get Started Today Contact us now for pricing, availability, delivery options, and full technical specifications.

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), fuel type: diesel, color: green, empty load weight: 2,300 kg, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: hydraulics, CAB RA 800 | Mini Asphalt Plant & Asphalt Recycler for On-Site Hot Mix Production Process RAP (Reclaimed Asphalt Pavement), heat materials evenly with a diesel-fired system, and deliver consistent hot mix wherever the job requires — from municipal streets to highways and industrial sites. Bedjx Uqfyopfx Aihowp Designed for pothole repair, asphalt patching, crack filling, and road resurfacing, it is the ideal solution for fast, cost-effective pavement maintenance. The TICAB RA 800 combines the power of a mini asphalt plant with the efficiency of an asphalt recycler, allowing you to produce high-quality hot mix asphalt directly on site. 🔧 Key Features On-site RAP recycling and hot mix asphalt production Output up to 800 kg/h for medium-scale repair works Diesel-fired heating system with precise temperature control Compact, mobile design for easy transport and field operation Supports bitumen emulsion, tack coat, and recycled asphalt pavement Durable construction for long-term, heavy-duty use ✅ Applications Asphalt recycling and RAP processing Pothole repair, patching, crack filling, and resurfacing Municipal roads, highways, parking lots, driveways, bike paths, and industrial pavements On-site hot mix production without the need for a stationary plant 🚀 Why Choose the RA 800? The RA 800 reduces material costs, eliminates transport delays, and enables crews to work efficiently with fresh hot mix asphalt anytime, anywhere. It’s a versatile, reliable solution for contractors, paving companies, municipalities, and civil engineering teams focused on productivity and pavement durability. 📩 Contact us for pricing, delivery options, and full technical specifications.

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Bsdpfsy U N Hiex Aihjwp Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: excellent (used), Year of construction: 2015, operating hours: 16,927 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, Manufacturer: DMG MORI Type: DMF 260-11 linear Year of manufacture: 2015 Control system: Heidenhain 530 Main spindle renewed in 2026 Bwjdpfx Aiezfzbkshsp Technical data: Travel distances: - x-axis: 2,600 mm - y-axis: 1,100 mm - z-axis: 900 mm - b-axis: +/-100 degrees - c-axis: nx 360 degrees Main spindle: - Speed range: 20 - 10,000 rpm - Drive power (40/100%): 44 / 32 kW - Torque (40/100%): 303 / 275 Nm - Tool holder: SK 50 Work table: - Fixed table with integrated rotary table - Table clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool positions: 60 - Chip-to-chip change time: 7.5 s - Operating hours: approx. 16,927 h Technical features: - Internal cooling system 40 bar - Spray gun for chip extraction - Rotating viewing window Accessories: - Paper band filter 600 l - Chip conveyor - 2x oil and emulsion mist separators - Electronic handwheel

Condition: excellent (used), Professional industrial vacuum cleaner KÄRCHER IVR-L 40/12-1 designed for use in production facilities, workshops, and metalworking applications. This unit is ideal for collecting liquids (such as coolant and oil) as well as metal chips. Its robust construction, large tank, and mobile base make this machine highly practical for daily industrial operations. ⸻ ⚙️ Applications: • CNC machines • Metalworking (chips + emulsions) • Workshops and manufacturing • Industrial liquid collection ⸻ 🔧 Technical specifications (typical for this model): • Model: IVR-L 40/12-1 • Series: Kärcher Professional • Power supply: 230V • Tank capacity: approx. 40L • Intended use: liquids + chips • Mobile design on wheels ⸻ 🛠️ Condition: • Used machine • Fully operational, tested • Very good visual condition • Normal signs of use (visible in photos) Bedpfjyxwhiex Aihswp ⸻ 📦 Included: • Kärcher IVR-L 40/12-1 vacuum cleaner • Suction hose • Power cable ⸻ ⭐ Advantages: ✔ Industrial-grade Kärcher Professional quality ✔ For liquids and solid contaminants ✔ Perfect for workshops and production ✔ Mobile, stable on wheels ✔ High durability and reliability ⸻ 🚚 Shipping: Shipping by courier or on a pallet possible. Personal collection available.

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN Bwsdpjvxwxvjfx Aihop feed B-axis 1 - 14.400 °/min feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Machine ON hours: 81,189 h • Overall dimensions: 4500 × 2250 × 2700 mm • Voltage: 400 V • Frequency: 50 Hz • Total power requirement: 45 kVA • Full load current: 65 A • External fuse: 80 A • Tool changer: Plate-type tool changer • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) • Safety/enclosure: Maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis • Internal coolant supply (IKZ) • Chip conveyor • Emulsion (coolant) system • Recooling unit (chiller) Bwjdpfx Aioy Edv Hehjp

Condition: used, Year of construction: 2001, type of input current: three-phase, filter area: 20.4 m², suction capacity: 3,200 m³/h, overall weight: 350 kg, Oil mist extractor for CNC machines, filter separator by Donaldson Torit. The device is designed for the filtration of oil mist (both emulsions and pure oil), vapors, and fumes originating from various metalworking processes. Filtration efficiency reaches 99.97%. Model: DMC-D1 2.2 kW three-phase fan Inlet diameter: 250 mm Capacity: 3200 m³/h Filtration area – 20.4 m² Year of manufacture – 2001 Bodpoymk Udsfx Aihewp Dimensions: Height – 2.90 m Width – 0.93 m x 0.75 m Weight – 350 kg Stock number – 1111

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 2,200 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 3,000 rpm, table load: 16,000 kg, number of axes: 5, This 5-axis TOS WHQ 13 CNC boring machine was manufactured in 2013. It features a working spindle diameter of 130 mm, a transverse table travel of 5000 mm, and a table load capacity of 16,000 kg. The machine is equipped with a HEIDENHAIN iTNC530 control system and includes an automatic tool change system. If you are looking to get high-quality boring capabilities, consider the TOS WHQ 13 CNC machine we have for sale. Contact us for further details. • Working spindle diameter: 130 mm • Clamping: ISO 50 • Spindle extension (W): 800 mm Bwedpfx Aioy D R D Iohep • Table clamping surface: 2500 x 3000 mm • Control: HEIDENHAIN iTNC530 + handwheel • Motors and drives: SIEMENS • Scope of repair 2026: • Cleaning the machine • Checking and adjusting machine geometry • Checking machine functionality • Revision of electrical equipment • Revision of hydraulics and lubrication • Adjustment of clearances and optimization of drives • Replacement of guide surface wipers • Repair of telescopic machine cover • Replacement of balancing ropes • Repair of the platform • Revision of CHOV-K 20 bar cooling • Revision of automatic tool changer AVN60 • Machine with guarantee – please contact us for more information Additional equipment • CNC table – fully controlled B axis • CHOV-K 20 bar spindle axis cooling (emulsion / through-spindle coolant) • AVN60 automatic tool changer • CE platform and fence (guarding) • Chip conveyor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Tool magazine (optional): 60 tools SK40 / HSK-A63 • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) Bwjdey D Ilcepfx Aihep • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h • Electronic handwheel • Coolant flushing gun (included) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window • Electronic handwheel • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Bwodpfxey D Hvaj Aihjp Technical Specification Taper Size SK 40

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Bwsdpfx Ajfg E H Soihjp Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: used, mobile finest oil filtering technology, new The mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities. The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better technical data M 130 flow oil: bis 1.050, 1.500, o. 2.100 liter/hour Bodpfsgrz Hbox Aihowp dimensions: height: ca. 1.175 mm, width: 585 mm, depth: 811 mm weight: ca. 93 kg Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Bwsdofg E H Uepfx Aihep Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: refurbished (used), functionality: fully functional, pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 60 l, Equipment: type plate available, The Symex CML 500 is a high-performance vacuum homogenizer mixer designed for producing demanding products in the pharmaceutical and cosmetics industries. This system combines mixing, dispersing, homogenizing, heating, cooling, and vacuum processing in a closed unit, enabling precise and reproducible production—from pilot scale to industrial applications. Such systems are specifically engineered for complex processes with stringent quality requirements. Technical Highlights of the Symex CML 500: Tank - Usable volume: approx. 500 liters - Total volume: approx. 780 liters - Minimum volume: approx. 125–160 liters - Product space pressure range: -1 / +2 bar - Product temperature: up to approx. 133 °C - Heating jacket: up to +4 bar / 151 °C - Design in accordance with AD 2000 - The tank is fully pressure and vacuum-resistant, ensuring safe operations under demanding conditions. Agitator - Anchor agitator with flow breakers - Speed range: approx. 11–66 rpm - Power: approx. 7.5 kW - Frequency-controlled - Designed for highly viscous products - The agitator provides uniform mixing and optimal heat transfer. Homogenizer - Power: approx. 16–20 kW - Speed: up to approx. 3,000 rpm - High shear performance for fine dispersion - Rotor/stator system - The homogenizer ensures stable emulsions and reproducible product quality. Vacuum System - Operation under vacuum possible - Liquid ring vacuum pump (external) - Pressure and vacuum monitoring - Vacuum operation significantly reduces air entrainment and improves product quality. Heating & Cooling - Double-walled vessel (2-zone heating) - Precise temperature control - Even heat distribution - CIP system Multiple CIP Connections - Rotating spray heads (360°) - Cleaning of the entire process chamber, including pipelines Material Feed - Direct suction of liquids and powders - Feed into the homogenizer area - Fast and low-loss processing - These integrated feeding and circulation systems enable highly efficient process management. Additional Equipment - Hydraulic lid lifting device - Multi-nozzle with several connection options - Sight glass with double wiper - Vessel lighting - Dosing vessel (approx. 8 liters) - Sampling valve - Membrane and disc valves - Circulation piping for homogenization and CIP Control & Operation The system features a modern operation concept: - Touch panel control - Adjustable speed and cycle times Bwjdpfx Asy Hq I Soihep - Process monitoring (pressure, temperature, speed) - Automatic and manual operating modes - Alarm and safety functions Advantages of the Symex CML 500 - Combination of all process steps in one unit - High process reliability through enclosed design - Reproducible and stable product quality - Suitable for highly viscous and sensitive products - Hygienic design (GMP-compliant) - Flexible application for different batch sizes Delivery & Handling - Delivery ex works - Turn-key project available (incl. commissioning) - International shipping possible

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 weight of the machine ca.: 15 t table turning speeds: 100 U/min table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion Bwedpfxeyz Sd Rs Aihep *