Used Emulsion for sale (241)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, Manufacturer: RUMA Type: MZ 150-B700 Serial No.: 2150.354 Year of manufacture: 2007 Volume flow rates: 1 - 150 l/min Drive power: 4.0 kW (optionally 5.5 kW) Rotor capacity: 15.0 liters Solid matter capacity: 10.0 liters Feed liquid with back pressure (0.7 bar) Tsdpfx Asw R Dmhoaced Possible applications of the centrifuge: In this system, only operate liquids that do not pose a fire or explosion hazard, and in general, only substances according to DIN 6601 (DIN 6601: Resistance of steel tank materials against liquids). Examples:  Emulsions  Oils  Electrolytes  Process water from vibratory finishing  Media with a pH value between 5.5 and 9.5  The solids to be separated must be specifically heavier than the liquid. Operating manual available in German.

Condition: new, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #307 MAN TGS 35.510 8x4-4 BL Kroll K 1,0-18,0 /36PESP, suction cup superstructure Tsdovh H Hbepfx Aacjd * KROLL * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker K 1.0-18.0 /36PESP * 18,000 liter tank size (air volume) * 15,000 liters sludge volume I 3,000 liters emulsion chamber * 1,000 liters rinsing water volume (unpressurized) * Emptying with discharge piston Chassis* MAN TGS 35.510 8x4-4 * 8x4-4 BL * TipMatic * 510PS/375KW * 2600 Nm * EURO 6 * Fuel volume 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning * Cool box Vacuum system* CVS VacuStar W1600 approx. 1,550cmb/h at 400mbar * Approx. 30m suction hose DN80 on the tank lid with announcements High pressure system* Speck P52/100-150 100l/min at 400mbar * Small hydraulic HP hose reel for 60m DN 13 hydraulic * Approx. 60m DN 13 flushing hose Special features* ADR version L4BH type class FL incl. EX/II, EX/III and AT * Suction connection pre-piston chamber DN100 remote-controlled. * Manhole FN500 on the left side * HP gun * Noise protection cladding in front of the pumps left and right * Removable and swiveling halogen work lights * LED ambient lighting * Radio remote control with two batteries * Tiltable scrap box * Rear view camera * Ladder with bracket and anchor points * Advertising panel on the left and right of the container Technical data* GGW 32,000KG * Length 10,700mm * Height 3,800mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty. For further detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Tsdpfx Aod N Dnhjacod Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr Tsdpfx Asw Nq Amjacod - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Todpfsv T Rtijx Aaced Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Todpelzhhcjfx Aaced Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Year of construction: 2018, condition: like new (used), functionality: fully functional, little used round cycle plant with 8 stations TECHNICAL DETAILS diameter machine bed: approx. 5000 mm weight: approx. 42 t Machine color: RAL 7035 light gray / base RAL 7016 anthracite Documentation: according to SEMA standard in German incl. CE marking on CD Hinged belt conveyor / cutter pump: built into base frame with hopper Lifting pump: 550 l/ min make KNOLL Coolant: 2500 I, 500 l/min (4 bar) EQUIPMENT - complete machine base frame - rotary table RTT 1200 NC controlled - rotary feed-through for the hydraulic supply - 8 x triple clamping devices externally mounted: 2 hydraulic three-jaw chucks each with integrated cylinder (clamping force: 40 kN/ 40 bar) - coolant tank system with pump for flushing - 14 lubrication points, piping and valves (lubricant: emulsion) - paper belt filter make KNOLL STATIONS Station 1: Feeding and unloading by robot - The part is clamped on the shaft. Station 2: Turning of the head contour (2-fold) - NC- feed slide SL 45-NC z-direction - 2 x facing unit SEMA PDE (without tools) spindle distance: 300 mm - 2 x facing head LAT-160-2-32 Station 3: Turning station via handling gripper (2-fold) - Part is now clamped at the machined head Station 4: Thread rolling (2-fold) - part is clamped at the head and supported in the hexagon - NC- feed slide SL 45-NC z-direction - 2 x spindle unit SEMA SE 100 (without rolling head and rollers) - 2 x torque support by hexagon socket - counterpart is inserted, turned to stop and disconnected Station 5: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 6: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) Tedpjnfvymefx Aaced - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 7: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 8: Thread deburring with deburring ring - 2 x spindle unit SEMA SE 55 (without tools) - NC- feed slide SL -NC z-direction - complete pneumatics make FESTO incl. piping - complete hydraulics make BOSCH/Rexroth or Parker incl. piping - central lubrication system make SKF incl. piping - swivel control panel with control panel front OP010C/PCU50 and keyboard - Control panel with control make SIEMENS 840 D-S7/ 24 NC axes - NC program for one workpiece - Complete cover with sliding doors (partially transparent) - pedestal

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: Tsdpfx Asv Nxbyjacjd - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure Tjdpfx Aajwywciocod - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 4 t/h Tjdpfow Nqu Asx Aacod - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: good (used), Year of construction: 2008, Universal machining center: Moving column Machine type: AXA VHC 2 - 1760 XTS Control: Siemens 840 D ShopMill Year of construction: 2008 TECHNICAL DATA: Travels: X-axis: 1,760 (2 x 630) mm Y-axis: 600 mm Z-axis: 800 horizontal or 770 vertical mm A-axis B-axis: +/- 100°, hydraulically clamped, infinitely variable interpolation Rapid traverse: (X/Y/Z): 40 / 40 / 30 m/min. Number of controlled axes: 5 Tjdpfx Aaov Nhwdscod Speed range: 30 - 6,000 1/min. Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool changer Tool positions: 36 NC rotary table: AXA RTA 4L-520 Faceplate: Ø 520, for vertical & horizontal setup mm Tailstock: manual, center height 280 mm Machine weight: 12,000 kg Space requirement (LxWxH): 5.2 x 3.4 x 3.3 m Equipment features: Internal cooling (IKZ): 30 bar Chip conveyor: Discharging to the left, integrated 200 l coolant tank Coolant system Coolant tank: 400 l Measuring probe: 3 D, Renishaw RMP 60 with RMI receiver (wireless version) Optional use of external cooling with compressed air or emulsion Direct path measuring system: Heidenhain Operating mode: 4 Separating plate for work table for pendulum machining Hardened flat guides Counter guides coated with sliding surface (Turcite) Renewal of the sliding surface of the basic slide X/Y in 2022.

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. Travels: X450mm, Y400mm, Z240mm Spindle / table distance: approx. 315mm - Linear direct drives in all axes - wear-free Tedpfott Argox Aaced Specification: - Tool changer places: 19 - Cooling unit for drives, motors, spindle and cable cabinet - Measuring laser for the fully automatic measuring of milling tools (length / diameter / contour / cone angle) as well as wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimal quantity lubrication - emulsion cooling - Spindle HSK40E with max. 42.000 rpm - Spindle compensation - Zero point clamping system Erowa integrated in the machine table - manual operating of chuck clamping - Automation package for retrofitting the machine with a pallet changer - Handbox The machine is overhauled in our house and is now in almost new condition. The machine can be inspected and tested under power after completion at our site. Please make an appointment with us!

Condition: like new (used), machine/vehicle number: 00399, LT Industries – Quantum 1200 Plus, model 20 channel multiplexer • Real-Time Multi-Constituent Process Analyzers • Multipoint, Fiber Optic Multiplexing Capability • Shock and Vibration Free The LT Industries Quantum 1200 Process Analyzer Series is comprised of the rugged, rapid scanning Quantum 2000 and 1200 Systems which were developed for both Pilot Plant and dedicated stand-alone installations in closed-loop-control of manufacturing processes. Using rugged, proven technology, LT Industries' systems enhance quality control, increase yield and reduce waste by providing real-time analysis. The sampling process is non-destructive and non-extractive, involving none of the sample preparation required by other testing technologies. LT Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. These systems deliver the real-time data output that has made LT Industries a recognized NIR leader in process measurement for control. Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for LT Industries. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder. T Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. Our systems deliver the real-time data out-put that has made LT Industries a recognized NIR leader in process measurement for control. The Quantum 1200 Process Analyzer Series combines analytical power and intelligence with ease of use in an integrated systems package. A pre-dispersed, monochromatic beam of light travels through the patented harmonic drive grating mechanism, where is it separated into discrete wavelengths and sent through a fibre optic link to illuminate the sample. The light transmitted back through the fibre optic link is converted into an electrical signal, which is compared by the microprocessor to the calibrated responses in memory. The data output results of this comparison are then used for process control Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment Tsdpfjg Tdwvjx Aaced Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 610 mm, total width: 625 mm, total length: 800 mm, overall weight: 100 kg, input voltage: 230 V, suction capacity: 1,200 m³/h, The LTA E 120 air filter extraction system is an electrostatic filtration system specifically designed for the separation of oil and emulsion mists in industrial applications. Such systems are characterized by consistently high separation efficiency and contribute to sustainable production. Tedpov S E H Usfx Aacod A key feature of LTA filtration systems is the automatic cleaning in place (CIP) system, which ensures consistently high filtration efficiency and long-term operational reliability. This system automatically cleans the filter elements with the cooling lubricant used in the machine, without the use of chemical additives or diluted solutions.

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder Todpfx Aev Drigeaced C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: new, Extraction capacity of filter unit at spigot*: 2050 m³/h Total power consumption*: 1.04 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 69 db(A) Dimensions L/W/H in mm: L 1290 / W 588 /H 595 Colour: RAL 7035 Weight: 113 kg Manufacturer: ISI Industrieprodukte GmbH Tedpjh Rfbxsfx Aacjd *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Year of construction: 1995, condition: used, CNC control - 11 axes Wenzler: Loading and unloading gantry CNC control: Sinumerik 810 linked with CNC control via PLC BAZ with 8 power chucks, vertically arranged on clamping drum: The MTA 8 is currently used to completely machine shaft-like workpieces with a length of approx. 200 mm and a diameter of approx. 20 mm: Tjdpfx Aajcqyfmocjd Machining:: Face turning - Longitudinal turning - Drilling - Thread forming - Internal hexagon whirling - External thread chased 6 machining stations with: ARTIS - tool control 4 machining stations with: internal tool cooling space requirement: approx. 40 m² ARTIS cutting force monitoring complete hydraulic system and electric control cabinets complete coolant system Cleaning plant for emulsion 2 pieces platform Spaeenfoerderer Oil pans Palletizing system Fa. Metabo Suction system various tool holders, clamping devices very good NP of the plant 1,35 Mio Machine no. 306 Weight: 17 t

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options Tsdpfxowwt Tle Aacjd

Condition: repair required (used), Year of construction: 2005, operating hours: 44,050 h, functionality: not functional, machine/vehicle number: 2731660/C 0000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Todporl Rwxjfx Aacsd Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale

Condition: like new (used), Year of construction: 2006, GLASS VAS 40 ID.NO. 2853 GLASS VAS 40 process machine for mixing & emulsions. Year mod 2006 built-in steam generator to be able to process the products under heat and pressure. Very nice machine that has previously been at a charcuterie school. Dimensions 260 x 160 cm Height 215 cm. Tedpfx Aasu Ivaujced

Condition: good (used), Year of construction: 2015, Control Heidenhain Siemens 840 D SL Working area: 700 mm x 420 mm x 380 mm (x/y/z) Table size 840 x 420 mm BBT 30 Max. speed 10,000 rpm Direct position measuring system X,Y,Z External blown air Handwheel Nano package (increase in temperature stability) Renishaw measuring probe OMP 40-2 Automation interface incl. automation door on the left and preparation for hydraulic interface Chip conveyor (increased discharge height 1050 mm) IKZ 40 bar Additional coolant tank 400 l Coolant-blown air switchover Additional nozzles on the headstock and in the magazine Flushing in the work area via additional nozzles Flushing gun Oil and emulsion mist separator PROGRESSline Tropical package (active cooling unit for Control cabinet, spindle and spindle motor) Tjdpfx Asvzahxsacjd 2-circuit clamping hydraulics with control panel Control cabinet lighting PLC project file Single load detection E1 closure BDE interface Electronic key system Max. table load 300 kg Tool changer: Number of tool positions 15 pos. Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Change time chip - chip 1.5 sec Feeds: Feed speed 1 - 60,000 mm/min. Rapid traverse 60 / 60 / 60 m/min Max. feed force 5,000 N Total power requirement 25 kVA Machine weight approx. 4.1 t Space requirement approx. 3.0 x 3.0 x 2.8 m

Condition: used, Year of construction: 2010, functionality: unexamined, Offered is an emulsion coolant system with a belt filter. Year of manufacture: 2010, flow rate: 500 l/min, power consumption: 21.2 kW. Further specifications can be found on the nameplate. Todpov N U Ezsfx Aacsd

Condition: good (used), Year of construction: 2018, operating hours: 6,310 h, functionality: fully functional, machine/vehicle number: 112029, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 305 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate Z-axis: 20 m/min, controller model: Brother C-00, table width: 800 mm, table length: 400 mm, table load: 200 kg, spindle speed (max.): 10,000 rpm, coolant supply: 30 bar, distance table to spindle center: 555 mm, distance table center to spindle nose: 625 mm, tool length: 200 mm, tool diameter: 80 mm, power: 26 kW (35.35 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BROTHER Speedio R650X1 HT machining center, first commissioning 2019 22 tools Tsdpfx Aaoq Hdzbocod 26KW spindle drive High Torque Spindle holder BBT-30 10,000 revolutions Rotary shuttle table low version 2 pallets 30 bar internal cooling Twin chip disposal system - 2 chip conveyors in one system Emulsion mist extraction for cooling lubricant

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, As an OPTION we can offer a workpiece storage Eco-Tower 60 and a handling system LANG Technik GmbH. Control: 3D path control including 15" TFT screen Siemens 840 D solutionline with ShopMill Open user interface TECHNICAL DATA Travel range. X-axis (longitudinal) 500 mm Y-axis (transverse) 450 mm Z-axis (vertical) 400 mm Drive power (40/100% ED) 35/25 kW Speed range 20 - 18000 1/min Tool holder SK 40 NC swivel rotary table Clamping surface ø 500 x 380 mm B-axis swivel range 0/+ 108° C-axis swivel range 300° Tool changer (chain magazine) Number of tool positions 60 EQUIPMENT/ACCESSORIES  NC swivel rotary table with B and C axes and absolute measuring system including drive cooling of the B and C axes Todpsvtaxusfx Aacsd  Chain magazine with 60 tool positions with double gripper  Infrared measuring probe Heidenhain TS 649  Laser tool measurement for measuring tool length and diameter Calibration mandrel with tool holder  Internal coolant supply, 40/80 bar switchable; Delivery rate 23 l/min/11 l/min, container size 980 l Paper belt filter  IKZ = internal coolant supply 40/80 bar  Rotating viewing window  Sealing air for linear measuring system  Coolant unit for spindle and drives  Active control cabinet cooling  Oil emulsion mist separator with electrostatic filter  Flushing gun for chip flushing  Blowing air through the center of the spindle, selectable via M function  Chip conveyor, designed for 60 magazine positions  Operating mode 4; Process monitoring in production  Absolute position measuring systems in all axes (X, Y, Z, B + C)  Preparation for automatic handling system (loading through side window)  Installation elements  Documentation

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, As an OPTION we can offer a workpiece storage Eco-Tower 60 and a handling system LANG Technik GmbH. Control: 3D path control including 15" TFT screen Siemens 840 D solutionline with ShopMill Open user interface TECHNICAL DATA Travel range. X-axis (longitudinal) 750 mm Y-axis (transverse) 600 mm Z-axis (vertical) 520 mm Drive power (40/100% ED) 35/25 kW Speed range 20 - 18000 1/min Tool holder SK 40 NC swivel rotary table Clamping surface ø 700 x 500 mm B-axis swivel range 0/+ 102° Todpfx Aaevtar Isced C-axis swivel range 300° Tool changer (chain magazine) Number of tool positions 120 EQUIPMENT/ACCESSORIES  NC swivel rotary table with B and C axes and absolute measuring system including drive cooling of the B and C axes  Chain magazine with 120 tool positions with double gripper  Infrared measuring probe Heidenhain TS 649  Laser tool measurement for measuring tool length and diameter Calibration mandrel with tool holder  Internal coolant supply, 40/80 bar switchable; Delivery rate 23 l/min/11 l/min, container size 980 l Paper belt filter  IKZ = internal coolant supply 40/80 bar  Rotating viewing window  Sealing air for linear measuring system  Coolant unit for spindle and drives  Active control cabinet cooling  Oil emulsion mist separator with electrostatic filter  Flushing gun for chip flushing  Blowing air through the center of the spindle, selectable via M function  Chip conveyor, designed for 120 magazine positions  Operating mode 4; Process monitoring in production  Absolute position measuring systems in all axes (X, Y, Z, B + C)  Preparation for automatic handling system (loading through side window)  Installation elements  Documentation