Used Extrusion Plastic Line for sale (20,150)

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 Dsdpfxod Sg Hro Adaecp 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Year of construction: 1994, condition: good (used), Max reel diameter 1600mm Die gap 1.25-2.26 Dcodpfx Adep Du A Tjaop Die diameter 350mm Thickness 25-130 micron Speed 250kg/hr

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Material Dryer and loader– M+H Equipment, Germany Dsdpjvztb Sofx Adaecp Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Tube Deposit Unit -500

Year of construction: 2000, condition: refurbished (used), • Manufacturer: SICA • Type : C800 • Year : 2000 • 6 caterpillar • Up to 800mm Dcjdpfx Asix I I Isdajp • Motor power : 8,5kW • Great condition

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Dodou Ttf Nopfx Adaecp Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Dcodow Ahfgspfx Adaop Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. Dcsdpsgbffvefx Adajp More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Dsdpfxew Nhavo Adaocp Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Dcodpfx Adevzqy Seasp

Year of construction: 2018, condition: excellent (used), The line is consisting of different producer : It is 2 layer , PE 100, pressure pipe production : 1. Three extruders (inner, outer layer and stripes) with automatic material loaders. Outer layer: LIANSU LSS 65/35, Main extruder , 350 kg/h,2018 Y Inner layer: LIANSU LSS 45/30, Co –extruder, max 40 kg/h, 2018 Y Stripes: co extruder Dodpsuuah Uefx Adascp 2. Extrusion die head complete with all necessary tools, die adaptors, heaters, for all dimensions 20-125mm. Lamellar calibrators up to Ø90mm, SDR 26, 17, 11, and with combinations can be produced SDR 9 and 7.4. Compete list with all tools (in attachments). 3. Vacuum tank, Periplast, year 2001, 6m length, with water-spey nozzles for cooling. 4. Additional cooling chamber, 6m length, Periplast , year 2001. 5. Unit for permanent and long term readable thermal marking, GNATA FILIPPO, Italy, type MAC 140/CCRC/AT-2. 6. Haul off, Liansu, ISPQ 110, year 2013.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating Dcjdpfx Adsuac Ugeasp - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system - Main engine extruder – 110 kw - Double degassing MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change - Centrifuges - Vibrator - Heated Silo + weight system - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Ekolinia washing line for LDPE, HDPE, PP Line components: 1. Washing/separating tank for flakes 2. Mechanical dryer – for preliminary drying 3. Mechanical dryer – for final drying 4. Discharging suction system Dcodpswwlr Tofx Adaop Capacity: 1000 kg/h Acid-resistant steel tub, length 6000/1800, 7 mixers with 1.5 kW capacity each, 2 vertical waste conveying screws, capacity 3 kW. Conveying screw for transferring material from tub to centrifuge, capacity 2.2 kW Centrifuge WE-200, capacity 75 kW, acid-resistant sieves Centrifuge WE-200, capacity 75 kW, acid-resistant sieves Air slide, capacity 11 kW Operating box The line was completely refurbished in June 2025 for a total cost of approx. €30,000 and is now in perfect condition. Can be tested in working condition.

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Dcedsh Eydmopfx Adasp Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 400 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 300 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Condition: used, Year of construction: 1994, Film width: 1500 mm Thickness range: 25-200 Dosing system: Summit Garvimetric Screw: 90 mm Heating zones: 5 Heating power: 64 kWt approx. Driving system: D.C.11-110 KW Power: 415 Die head: fixed Diameter die head: 350mm Diameter of the gap: 1.25 to 2.25 IBC – yes Air ring type: optifil Die lip gap diameter: 2-50 Calibrating basket: yes with Ultrasonic control Motorized adjusting of calibrating basket in diameter / high: yes Take-off system: Oscillating Number of rolls: 2 Web guiding system: Yes Final roll width: 1650 mm Final roll diameter: 1000 mm Final roll maximum weight: 1 t Rewinder speed: 100 Thickness Control System: Optifil Micro perforator: no Dcedpfx Aowgcw Ssdaep Filter changer: Yes(hydraulic) Electrical requirements: 400 A PLC: Siemens Simatic S5-100 U Trim removal system: Rollers Yes-Extract No

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 400 x 4000 mm incl. strand guiding rollers Strand blower Dcedpjiyy I Nofx Adasp Strand pelletizer SG 300 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Year of construction: 2025, condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Dodpfx Adowg R Rteajcp

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, total width: 2,350 mm, throat depth: 500 mm, empty load weight: 1,800 kg, Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering Dedexbui Tspfx Adascp werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm herhaalde materiaaltoevoerlengte: 0-9999 mm maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4200 x 34 x 1.1 mm

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, LINE GICAMILL S24/6000 gantry milling machine from 1990. CNC NUM 760F. X 6000, Y 2600, Z 1000. Table size 6000 x 2000 mm. Distance between columns 2445 mm. Clearance under crossbeam 1335 mm. Spindle 35 kW, 1620 rpm. Siemens motors. Djdpfx Adoxu U Rweaecp

Condition: excellent (used), Year of construction: 2014, 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Hersteller: MORETTO Typ: XD 23A Baujahr: 2020 Inhalt Trichter: 380 Liter Trockenlufttemperatur: max. 200° C Djdexk Ux Tjpfx Adaocp

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings Dedpfx Adexbta Dsaocp The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Condition: excellent (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, overall weight: 25 kg, type of input current: DC, input voltage: 220 V, power: 220 kW (299.12 HP), volume flow: 4.6 m³/h, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Dcodpforl Rv Tjx Adajp Supplied without hopper 1/38 brushless geared motor - 220 W - 3000 rpm Power supply 220 V mono 50 Hz Weight : 25 kg

Condition: new, Part Number M0297 – For custom furniture manufacturing – Drilling horizontally, vertically, and at an angle in wood-based panels and solid wood – 1500mm fence frame – Complete set of spacers included – Brand new machine TECHNICAL DATA - Number of spindles: 23 - Distance between spindles: 32mm - Total center-to-center distance: 704mm - Maximum tool diameter: 40mm - Maximum drilling depth: 65mm - Max. workpiece size: 740 x 3000 x 200mm - Height of worktable: 860mm - Worktable dimensions: 949 x 350mm - Drilling head tilt: 0-90° - 2 independent pneumatic cylinders - Spindle speed: 2800 rpm - Motor power: 1.5 kW - Operating pressure: 6/8 bar - Dust extraction port diameter: 80mm - Machine package dimensions: 1115 x 950 x 1050mm - Frame package dimensions: 1500 x 120 x 60mm - Net/gross weight: 271kg/301kg Dcsdpfxjxbzkwo Adajp Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices are subject to change with significant exchange rate fluctuations) PRODUCT FEATURES The Maggi Ms704 is a multi-spindle drilling machine designed for rapid production of custom furniture. The MS 704 is a compact machine capable of managing the production process from start to finish, including drilling carcasses, hinge fronts, and any type of system drawers from any brand. The drill allows comprehensive machining of all hole types, in all common technologies: for confirmats, dowels, connectors, mounting holes for runners, shelf pins, hinge cups, and mounting holes for guides and actuators. The worktable width, without removing side stops, is 740mm, so you can drill components with greater-than-standard depths without limitations. The machine is equipped with a patented 1500mm fence frame, allowing processing of workpieces up to 3000mm long, independent of the 32mm system. A new concept for furniture element drilling allows for fast material processing without needing to retool the machine. The fence frame is a fixed part of the device. Unlike conventional drilling machines, the main operational axis is perpendicular to the drilling head, not parallel. The MS 704 is also equipped with adjustable pressure beam height, making it possible to work with materials up to 200mm thick. The clamps are powered by independent circuits and are equipped with valves for safe operation, allowing one clamp to be switched off when machining smaller components. The MS 704 comes as standard with a drill bit magazine and a complete set of spacers for positioning elements along the axis parallel to the spindle head.

Condition: ready for operation (used), total height: 1,900 mm, total length: 1,250 mm, total width: 2,200 mm, empty load weight: 1,000 kg, nominal power: 3 kW (4.08 HP), Semi-automatische lintzaag Hydraulisch klemmen Normaal koelsysteem + verstuiveroptie Digitale uitlezing voor snijhoek Rollenbanen inbegrepen Depth of throat: 500 Max height of workpiece: 335 mm Sawspeed: 15 - 150 m/min Dsdpfexcqixex Adaecp Length of band saw: 4400 x 34 x 1,1 mm

Condition: excellent (used), Year of construction: 2010, 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen, Inhalt Trichter 75 Liter Hersteller: PLASTIC SYSTEMS Typ: DW60 MT DISP Baujahr: 2010 Inhalt Trichter: 75Liter Trockenlufttemperatur: max. 200° C Ausstattung: 2,0 ST. Materialförderer Hersteller: PLASTIC SYSTEMS Djdpfx Aoxk Uy Redajcp

Condition: new, Year of construction: 2019, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, power: 0.12 kW (0.16 HP), tank capacity: 15 l, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM10-38 with inclined feed line 15-liter capacity stainless steel hopper 1/38 brushless geared motor - 118 W - 3000 rpm Power supply 230 V mono - 50 Hz Weight : 19 kg Type 1KC2020 screw and bush assembly for DM10 filler Screw D.20 mm at 20 mm pitch Sleeve D.28 mm Connection Ø 50mm Dederlm Ihepfx Adajcp Cast aluminium base type BMS80 for DM10-20 Material inlet: 92 x 92 mm and outlet D.80 mm Height: 234 mm