Used Extrusion for sale (296)

Condition: good (used), Year of construction: 2020, Extruder, co-rotating twin screw extruder, twin screw extruders, plastic injection molding machine -Engine power: 55 kW - Output: approx. 200 to 300 kg/h -Screw diameter: 51.7 mm -Speed: 60-400 rpm -Dimensions: 1250/4530/H1080 mm -Weight: 3000 kg Bodpfx Aaeytgwbeaowk

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Bwedpfxjyx Dwke Aaask Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2013, condition: used, Make: EXTRUDEX, Year of manufacture: 2013, comprising: Granulate drying/conveying unit, Manufacturer: Koch, Model EKO300F, Year: 2013, Serial No.: 4459, microprocessor control, drying cylinder ETB1000, capacity: 1,000 l, vacuum conveyor, 2 dosing/conveying units, IFS exhaust air system, single-screw extruder, 3-part cooling section, refrigeration unit by Daikin, diameter measuring system by Zumbach, inkjet coder by VideoJet, Model 1710, microprocessor control, flame treatment unit by Hill, Model MF20-2-1, Year: 2013, caterpillar take-off by Extrudex, Model BC105, discharge conveyor belt, discharge chute, waste container, mobile, forklift pockets, peripheral devices, control cabinets, set of long part racks, 2 accessory cabinets, 2-door, industrial vacuum cleaner, workbench, 1,500 x 700 mm with base cabinet, 3 drawers. Bwodpfsyx Eytex Aaaek

Condition: good (used), Year of construction: 1989, machine/vehicle number: NE 60 053, Brand: Hans Weber Type: NE 60 Bedpeylv A Rofx Aaaswk Serial No.: NE 60 053 Year of manufacture: 1989

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Bwedpfx Aasvbcbujajk Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket Bwsdpfsyt Ikvsx Aaaok • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica Bjdpfx Aaju Rda Ioaswk - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: good (used), Year of construction: 1995, operating hours: 60,269 h, Brand: Cincinnati Milacron Model: CMS 60-25 BL Serial No.: 2008877/10 Screw Type: Single screw Year of manufacture: 1995 Operating hours: 60,269 hours Screw diameter: 60 mm L/D ratio: 25 L/D Bwsdpfx Ajyaa S Sjaaek Motor power: 28 kW

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options • Including haul-off Bwsdpfx Asvri Ddjaajk • Including cooling bath

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D Bodeuak Nlspfx Aaajwk - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Condition: used, Year of construction: 1970, functionality: fully functional, BARMAG extrusion system consisting of: 1x BARMAG BA KEP 90-26.3-S extruder 1x BARMAG 9E4-11-103/Z transmission gear 1x AEG G 16.04 drive motor with forced ventilation, 460V, 112A, 46.7KW, 3150rpm, rated at 330V, 2.21A 1x SCHOLZ dosing unit, incl. Feed hopper 1x Control unit System features: - Single-screw extruder, built around 1970 - Throughput 200 kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90 mm - Screw length 2769.5 mm - Process length 26.3D - Geometry: Feed - Barrier - Mixing section - Screw material: 1.8550, nitrided - DC motor Bodeuakzzepfx Aaaewk - Technical documentation This system is available in three versions. Subject to prior sale. Please send inquiries via email only. Note: The machine is still installed and can be inspected on site. The buyer must dismantle it and arrange shipping themselves. This is not included in the offer price.

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Material Dryer and loader– M+H Equipment, Germany Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Bodpfxjvztb Se Aaaswk Tube Deposit Unit -500

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Bwodpfxevzqy So Aaask

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off Bwjdpfx Aaei Tu U Usask with haul-off with winder and guiding device

Year of construction: 1970, condition: ready for operation (used), A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible. Bwsdpfxjw R Dhre Aaask

Year of construction: 2013, condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. Bsdpfx Aajv Ip S Heajwk

Year of construction: 2014, condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Bwjdov Ip Syepfx Aaaok

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing Bwedpfxei Dtb Ao Aaaok > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 Bodpjqpft Ijfx Aaaewk - Screw Ø: 65 mm - Working hours: 102.364

Year of construction: 1981, condition: excellent (used), UBE 800T ALUMINIUM EXTRUSION PRESS Yom: 1979/2008 Dimensions of recipient; - Diameter of 132mm x 560mm - Diameter of 127mm x 560mm - 90mm diameter x 555 mm Efficiency Bedpfsggrxcex Aaaswk - Squeezing (maximum tonnage) at 210kg / cm2 800 M Ton - Squeezing (minimum tonnage) at 210kg / cm2 697 M Ton - Servo-side depth. the piston rod forward at 210kg / cm2 112 M Ton - Servo-side depth. rod return at 210kg / cm2 63 M Ton - Sealing recypient at 210kg / cm2 69 M Ton - Opening recypient at 210kg / cm2 94 M Ton - Puncture at 210kg / cm2 102 M Ton - Shift matrix at 210kg / cm2 12 M Ton

Condition: new, Year of construction: 2026, functionality: fully functional, POWER kW 2.2 FREQUENCY Hz 50 SUPPLY VOLTAGE V 400 Bwsdpfxjx U D Dco Aaaok MAXIMUM VACUUM mbar 30 MAXIMUM AIR FLOW m³/h 1400 NOZZLE DIAMETER ømm 160

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality Bodpfjxwvqqox Aaaowk • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Year of construction: 2023, condition: new, Coperion ZSK 27 MV Plus extrusion line Application: Pharma dental sticks Year: 2023, never used, still in original packaging Bwjdpfsxr Hgxjx Aaask

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Bwodsya Eldepfx Aaask Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: excellent (used), functionality: fully functional, Different MAAG Melt Pumps available - For example Extrex 110 , 90 , 70 , 56 , 36 Bwedpfodq Ak Uox Aaajk - Possible to order complete on a frame with , motor , gear , cardan and a controll cabinett.