Used Haas for sale (222)

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 13137, Capacity: approx. 50-56 kg/h (depending on the dough, filling, etc.) Overhaul year: 2026 – new electronics, housings, insulation, gas reducer, all bearings + motors are new or refurbished. Kedpfszwmz Hex Acpjdu Model: EWB 2/2 Two dough belts. Set including a dough tank and pumps – stepless speed control via a frequency inverter. Power source: CNG/LPG 50 Hz, power: 5.3 kW

Condition: ready for operation (used), Year of construction: 2025, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, overall weight: 6,464 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2025. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool capacity of 30+1. If you are looking to get high-quality machining capabilities, consider the HAAS UMC-750 universal machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Platter (~ max): 24.0 in / 610 mm • Spindle Nose to Platter (~ min): 4.0 in / 102 mm • Spindle Max Torque: 90.0 ft-lbf @ 2000 rpm / 122.0 Nm @ 2000 rpm • Spindle Drive System: Inline Direct-Drive • Spindle Taper: CT40 | BT40 | HSK-A63 • Spindle Bearing Lubrication: Air / Oil Injection • Spindle Cooling: Liquid Cooled • B Axis (Tilt) Travel: +120° to -35° • B Axis Max Speed: 170 °/sec • B Axis Continuous Torque: 2240 ft-lbf / 3037 Nm • B Axis Brake Torque: 2000 ft-lbf / 2712 Nm • C Axis (Rotation) Travel: 360° • C Axis Max Speed: 179 °/sec • C Axis Continuous Torque: 1854 ft-lbf / 2514 Nm • C Axis Brake Torque: 900 ft-lbf / 1220 Nm • Max Part Swing: 27.0 in / 686 mm • Platter Diameter: 19.70 in / 500 mm • Max Weight on Platter: 660 lb / 300.0 kg • Max Weight on Platter w/ Pallet Pool: 200 lb / 90.7 kg • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Number of Std T-Slots: 7 • T-Slot Center Distance: 2.48 in / 63 mm • Max Cutting Feedrate: 833 ipm / 21.2 m/min • Rapid Feedrate (X, Y, Z): 1200 ipm / 30.5 m/min • Max Thrust X / Y: 3300 lbf / 14680 N • Max Thrust Z: 4050 lbf / 18015 N • Tool Changer Type: Side-Mount Tool Changer (SMTC) • Tool Capacity: 30+1 • Max Tool Diameter (full): 2.5 in / 64 mm Kedpsz Nmigjfx Acpsdu • Max Tool Diameter (adjacent empty): 5.0 in / 127 mm • Max Tool Length: 12.00 in / 305 mm • Tool-to-Tool Time (avg): 1.80 s • Chip-to-Chip Time (avg): 2.40 s • Coolant Capacity: 55 gal / 208 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Air Pressure Min: 80 psi / 5.5 bar • Electrical Input AC Voltage (3 Phase): 220 VAC (70 A) / 440 VAC (35 A) • Shipping Weight (Standard): 14250 lb / 6463.8 kg Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox Kedpfsz Nx Rcsx Acpodu • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-2SS | 4th axis | Through-spindle coolant | 2014 Vertical CNC Machining Center HAAS VF-2SS, manufactured in 2014. Machine equipped with a 4th axis and through-spindle coolant (TSC). Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Kodpfoz Dh Edox Acpedu Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Max. table load: approx. 680 kg Spindle speed: 12,000 rpm Spindle taper: CT/BT 40* Spindle drive: direct drive Tool changer: 24+1 positions* Rapid traverse X/Y/Z: up to 35.6 m/min CNC control: HAAS Through-spindle coolant (TSC) 4th axis included Tool holders: not included Year of manufacture: 2014 Operating hours: not available Previous operation: 2–3 shifts Equipment: 4th axis Through-spindle coolant High-speed Super Speed (SS) version Automatic tool changer Coolant system Machine inspection can be arranged by prior agreement.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, Available in Q1/2027, equipment can still be adapted to meet specific needs. Universal 5-axis retrofitting grinding machine directly from the manufacturer. Equipped with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, spur gears, skiving tools, deep-hole drills, and other workpieces/components. Working area: X-axis: 630 mm Y-axis: 345 mm Z-axis: 430 mm C-axis: Rotation angle 300° X3 auxiliary axis: Working area: 400 mm Grinding spindle: Interface: HSK80 (conversion to HSK50 possible) Power: 100% 28.8 kW Speed: Standard 12,000 rpm Measuring system and feed: Resolution of linear axes: 0.0001 mm Rapid traverse of linear axes: 30,000 mm/min Resolution of rotary axes: 0.001° Speed of C-axis: 150 rpm Rotary axis: (A-axis SK50) Center height: Standard 175 mm Speed as spindle: 1,000 rpm Optional: 2,600 rpm Control system: Siemens 840D SolutionLine Tool changer: Single-wheel, 6-8 positions Coolant system: Turbo Separator Kdjdpfx Aceyzqwcjpeu Extraction system: LTA Fire extinguishing system: Kraft & Bauer Dressing unit Tailstock: optional Further accessories/clamping devices available from the extensive A. Haas clamping device catalog. Individual, customer-specific training programs. Includes pre-acceptance at the manufacturer's plant, IBN (installation, briefing, and training), and final acceptance at the customer's site. Financing options available upon request.

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Kdedpfjzxz Hgjx Acpju Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, CNC Vertical Machining Center HAAS MINIMILL With HAAS control system Year of manufacture: 2006 Travel distances: X 406 mm, Y 305 mm, Z 254 mm Spindle speed range: 30 – 6,000 rpm, continuously variable (SK 40) With the following accessories: Kedpfoz R A I Ijx Acpjdu Fixed angular table, 730 mm x 300 mm clamping surface Vertical tool changer with 10 magazine slots (SK 40) Full protection enclosure with sliding doors and interior lighting Electronic handwheel 3D probe Renishaw OMP 40 (installed in 2021) Tool breakage detection Renishaw TS 27 R (installed in 2021) NC dividing head HAAS, year 2021 Coolant system 4 machine feet Operating manuals

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, feed length X-axis: 559 mm, feed length Y-axis: 406 mm, feed length Z-axis: 508 mm, controller model: NGC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, 12,000 rpm inline direct-drive spindle High-speed, 30+1 tool capacity side-mount tool changer Kdjdjzr U Hyjpfx Acpju Integrated pallet changer with 559 x 368 mm T-slot pallets Machine parts are placed on one pallet while the other is being prepared.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Equipped with 2 flights. See PDF file for sketch. Kdedpfx Acszn N Udjpeu Trough inner width 600 mm. Drive via geared motor with 4.0 kW.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,375 h, functionality: fully functional, machine/vehicle number: 3096542, HAAS ST-20 – CNC Lathe – Manufactured 07/2013 For sale: HAAS ST-20 CNC, manufactured in July 2013, Made in U.S.A. Condition: Low running hours, excellent condition, fully operational, all inspections / services done. Machine details: • Manufacturer: HAAS Automation • Model: ST-20 • Year of manufacture: 2013 • Serial number: 309652 • Power supply: 360–480 V, 3-phase, 50/60 Hz • Full Load: 20 A • Largest Load: 35 A • Haas CNC control • Complete machine, available for inspection • Power-On Time: 1,375:33:11 • Cycle Start Time: 320:43:06 • Feed Cutting Time: 251:20:50 The machine is in good condition and is suitable for production, prototyping, and general CNC machining. Price: 31.500 EURO Location: Baia Mare, Romania Ksdpfsz Ag Svsx Acpsdu

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, Kodpfx Acexpw Rvopjdu chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Kdodpfovwz T Ujx Acpeu

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. With 2 sections. See PDF file for sketch. Kdedpfx Acozn N Tyjpju Trough inner width 600 mm. Drive via geared motor with 4.0 kW.

Condition: good (used), Year of construction: 2007, Turning diameter 330 mm Turning length 508 mm Spindle speed 3,400 rpm Kedpjz Stgqofx Acpsdu Tool holder VDI 40 Distance between centers 610 mm Turning diameter over the bed 585 mm Turning diameter over the cross slide 241 mm Travel - x 214.6 mm Travel - z 508 mm Bar diameter 63 mm Total power consumption 15 kW Machine weight approx. 4,100 kg Total power consumption 15 kW Dimensions 2800 x 1800 x 1800 mm Equipment: - Bar feeder 1.5 m Servo Bar 300 - 3-jaw chuck - Collet chuck - Tailstock - Various holders

Condition: excellent (used), Year of construction: 1997, Mikron HAAS VCE1000 vertical machining center Year: 1997 Axis X travel 1016 mm Axis Y travel 508 mm Axis Z travel 635 mm Table width 457 mm Table length 1220 mm Type of CNC HAAS Spindle taper ISO 40 Max. part weight on table 1575 kg ATC Number of tool pockets 20 Max. spindle speed 7500 rpm Machine dimensions length 3530 mm height 2985 mm width 2450 mm weight 5500 kg Kdjdpez Tlhcofx Acpju Accesories/options: - Chip conveyor - Through spindle coolant - Prepared for 4.axis ( drive and wiring included ) - Renishaw touch probe - Renishaw TS27 tool measuring In very good condition, coming from a Swiss tool shop.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: Kodpszh Eh Tsfx Acpjdu • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 863 mm, turning diameter: 431 mm, spindle speed (max.): 3,400 rpm, overall weight: 7,250 kg, chuck outer diameter: 254 mm, Haas SL-30 THE Kodpfx Ajwbd Hqecpedu Year 2008 Control Haas Chuck 10” Turning Length 863 mm Turning Ø 431mm Ø above the bed 762 mm Turret 12 station Speed 3400 rpm Length x width x height 4500 x 2300 x 2000 Weight 7250 kg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Available from Q1/2027, or upon agreement. Equipment can be further adjusted to meet specific needs. Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Also available with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, hobbing wheels, skiving tools, and other workpieces and components. Work area: X-axis 700 mm Y-axis 410 mm Z-axis 500 mm C-axis rotation angle 320° X3 auxiliary axis: Optional Work area 600 mm Grinding spindle: Interface HSK 80 E Power 100% 28.8 kW Speed Standard 12,000 rpm Measuring system and feed: Resolution linear axes 0.0001 mm Rapid traverse linear axes 30,000 mm/min Resolution rotary axes 0.001° Speed C-axis 150 rpm Rotary axis: (A-axis SK50) Kodpsz Dilfjfx Acpjdu Center height Standard 175 mm Speed as a spindle 1,000 rpm Optional 2,600 rpm Control system: Siemens 840 DSL Tool changer: Double wheel Coolant system: Available upon request Extraction system: LTA Extinguishing system: Kraft & Bauer Dressing unit Additional accessories/clamping devices from the extensive A. Haas clamping device catalog are possible. Individual, customer-specific training. Includes pre-acceptance at the manufacturer's plant, IBN (Initial Batch Numbering), training, and final acceptance at the customer's site. Financing also available upon request.

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, cutting length: 572 mm, spindle through-hole: 76 mm, 12-position BMT65 turret, Kdsdpfezk H Hvsx Acpsu Y-axis travel: +/- 50.8 mm, HAAS control system, 3-jaw chuck, 254 mm, -counter-spindle -chip conveyor, -swarf tray with pump, -measuring probe, -parts catcher low operating hours, excellent condition.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table width: 584 mm, table length: 1,321 mm, table load: 1,815 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details. • X-axis rapid traverse: 18.0 m/min • Y-axis rapid traverse: 18.0 m/min • Z-axis rapid traverse: 18.0 m/min • Distance spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Max spindle torque: 122.0 Nm @ 2000 rpm • Table T-slot width: 14 mm • Table T-slot pitch: 80 mm Additional equipment • Included documentation: Manuals and CE Declaration of Conformity Technical Specification Kodsz Erwtjpfx Acpjdu Taper Size BT 40

Condition: good (used), Year of construction: 2012, HAAS ST-30 CNC lathe with C-axis and driven tools Year: 2012 Technical details: Swing diameter 806mm, Maximum cutting diameter 533mm, Distance between centres 762 mm Maximum cutting length 660 mm Bar capacity 76 mm Spindle Motor 22,4 kW Max spindle speed 3400 rpm Kodpszz Agtefx Acpedu C-axis and driven tools Turret 12 positions Tailstock Accessories/options: 1 axial driven tool holder 1 radial driven tool holder 10 pieces static tool holders Tool presetter, Renishaw Foot pedal for chuck and tailstock operating Coolant tank Swarf conveyor Under power in our warehouse.

Condition: good (used), Year of construction: 2016, Description: Kdedsztx Spopfx Acpsu The machine is in good technical condition and can be tested upon prior agreement. It includes all equipment and, if applicable, accessories (holders, tools, etc.).

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1600058, total height: 300 mm, total width: 670 mm, total length: 890 mm, rotary table diameter: 600 mm, table diameter: 600 mm, compressed air connection: 8 bar, Haas HRT600 CNC rotary table / 4th axis / Ø 600 mm Haas HRT600 CNC rotary table (4th axis) for sale. This rotary table comes from a Haas VF-6B/40HE and was used as a 4th axis. The table is equipped with a servo drive and was tested on the machine again before removal. The axis could be moved and rotated flawlessly via the control. Kdjdezzbitspfx Acpsu The rotary table has a diameter of approximately 600 mm. Serial number of the rotary table: 1600058. Condition Rotary table rotates and moves via the Haas control. Functionality tested before removal. No detailed geometric measurement performed. Angular accuracy, runout, and repeatability were not checked with a dial indicator. Sale due to non-use. Technical data Manufacturer: Haas Automation Model: HRT600 Type: CNC rotary table / 4th axis Table diameter: 600 mm Serial number: 1600058 Year of manufacture probably 2004/2005 (matching the original machine)

Condition: ready for operation (used), Year of construction: 2019, This 4-axis HAAS ST-15Y was manufactured in 2019 and features Y and C axes with driven tools, D210 hydraulic chuck, 65 mm spindle bore, hydraulic programmable tailstock, 12-station VDI-40 turret, and chip conveyor. If you are looking to get high quality turning capabilities consider the HAAS ST-15Y machine we have for sale. Reach out for more information. Additional equipment • Driven tools Machine Benefits Kodpfxozvbppe Acpedu Technical Machine Benefits • D210 hydraulic chuck. • D65mm main spindle bore. • Hydraulic programmable tailstock. • 12 pcs turret head. Vdi-40 • X, Z, Y, C-axis. • C-axis with hydraulic brake.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor Kdodpfx Aoz Ah S Decpeu • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes