Used Haas for sale (259)

Year of construction: 2007, condition: ready for operation (used), Travel X/Y/Z: 406mm/305mm/254mm, table dimensions X/Y: 914mm/305mm, max. table load: 227kg. Spindle speed: 6000rpm, tool holder: BT40, tool positions: 10, rapid traverse X/Y/Z: 15.2m/min. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2700mm, weight: approx. 1550kg. Including an additional control panel on request (not included in the price). Documentation available. On-site inspection is possible. Nwedpju T Rg Dofx Ad Hjp

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Nodpfxjv N Di As Ad Hswp Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 2000 mm Measurements depth 3300 mm Measurements height 2000 mm Control Unit Brand HAAS Main Drive Spindle speed range 3400 Spindle bore 76 mm Number of axis 2 Movement X-Axis Movement 287 mm Z-Axis Movement 864 mm Turret Number of turrets 1 Tools Number of station 12 Nodpfx Asxc Rfaed Hewp Media Chip conveyor Yes This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Application Types Turning

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Electrics / Controls Including IFM display Nwjdju Hgllopfx Ad Hop Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Condition: excellent (used), Year of construction: 2017, operating hours: 6,050 h, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Y-axis: 572 mm, Haas turning center Type: ST 25 Year 2017 Nedpfx Aerdg H Hod Hewp Hours of operation 6047h Maximum power rating, drive system 22.4 kW, belt drive Bar capacity, maximum speed 76.0 mm, 3400 r p m Axis movement range (X, Z) 213 mm, 572 mm Chip extraction Spindle clearance 75mm

Condition: used, Year of construction: 2022, X/Y/Z - 610/406/406 mm B-axis 120-35- deg. C-axis rotation 360 deg. (max. part swing 457 mm) Spindle speeds 15.000 rpm Spindle power 22,4 Kw Spindel taper BT 40 15.000 o/m, inline direct-drive 22,4kW Side mounted toolchanger 30 + 1, BT 40 21 bars internal coolant through spindle Chip conveyor Automatic tool & part measuring Automatic calibration Dynamic Work Offsets Ethernet Interface Njdjv Ina Njpfx Ad Hewp Haas Connect Media Display 1 GB memory 208 L. coolant system Fine filter for coolant Remote Jog hand wheel Syncronized threading Programmable coolant nozzle High Speed Machining Prepared for air up through table Wifi camera Full 5-axis Equipped with: Vacuum table Large tool package (see photos) ONLY BEEN WORKING FOR APPROX 1100 HOURS - APPEARS LIKE BRAND NEW

Condition: ready for operation (used), Year of construction: 2014, operating hours: 316 h, functionality: fully functional, machine/vehicle number: 3097899, turning length: 355 mm, turning diameter: 229 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 355 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Chuck size: 165 mm Maximum turning diameter: 229 mm Nsdowy Rxdopfx Ad Hswp Turning length without workpiece holder: max. 355 mm Bar capacity: 44 mm Spindle Maximum spindle speed: 6,000 rpm Motor power: max. 11.2 kW Torque: max. 102 Nm at 1,300 rpm Spindle nose: A2-5 Spindle bore: 58.7 mm Swing Diameter Over front cover: 641 mm Over cross slide: 413 mm Over tailstock: 597 mm Travel and Feed Rates X-axis travel: 200 mm Z-axis travel: 355 mm X-axis rapid traverse: 30.5 m/min Z-axis rapid traverse: 30.5 m/min MACHINE DETAILS Electrical Data Power supply (3-phase): 354 - 488 V Dimensions Operating height: max. 1,803 mm Operating width: max. 3,200 mm Operating depth: max. 2,108 mm Operating Hours Power-on time: 7,291 h Cycle start time: 316 h EQUIPMENT 15" LCD color display with USB interface 1-MB program storage Synchronized tapping BOT turret with 12 tool stations

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 864 mm control HAAS Nwedpfx Adsupmhwo Hep bar diameter 76 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm turret head 12 Pos. VDI 40 drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor - collant equipment

Year of construction: 2008, condition: ready for operation (used), General Data Measurements depth 3900 mm Measurements width 2000 mm Nwodpfjxc Rd Nsx Ad Hsp Measurements height 1900 mm Control Unit Brand HAAS Main Drive Spindle speed range 3400 Spindle bore 103 mm Number of axis 2 Workpiece Workpiece drm over bed 762 mm Additional Equipment 2-step gearbox 3 jaw chuck + collet chuck Barfeed magazine Samsys This HAAS SL-30TBHE was manufactured in 2008. A robust horizontal turning machine featuring a spindle speed of 3400 1/MIN, 22 kW motor power, and a swing over bed of 762 mm. It includes a 12-position turret, hydraulic tailstock, and both 3 jaw and collet chucks. Dimensions are 3900x2000x1900 mm. Consider the opportunity to buy this HAAS SL-30TBHE horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, nominal power (apparent): 22 kVA, controller model: HAAS, table width: 914 mm, table length: 1,626 mm, table load: 4,536 kg, rotary table diameter: 760 mm, overall weight: 13,611 kg, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine) Nwsdpfx Asvgmr Ied Hjp

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 11.2 [kW] - Spindle speeds : 20.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 508 x 406 x 394 [mm] - Rapid traverses rates (X/Y/Z) : 61 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 660 x 381 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2540 x 2030 [mm] - Machine height : 2490 [mm] - Machine weight : 2300 [kg] EQUIPMENT - CNC : HAAS - High-speed machining option (HSM) - Rigid tapping - DIVIDING UNIT - Coolant tank : 170 [l] - Programmable spraying nozzle - Oil mist extractor : ELBARON Nodjuhbuzepfx Ad Howp - Tool probe - Workpiece probe

Year of construction: 2007, condition: ready for operation (used), Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. Nodpfxeq N A I Ro Ad Hewp

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2052582, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: Haas, table width: 914 mm, table length: 1,626 mm, table load: 4,536 kg, rotary table diameter: 760 mm, rotational speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Condition: very good (used) 4-axis horizontal machining center Brand: Haas Equipment: Tool holder SK50 Tool positions: 30+1 Nsdpfxew Uz Ane Ad Hjwp Year of manufacture: 03/2008 Weight: 13,600 kg Additional information: Machine has been newly painted Price on request

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: 1106086, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 356 mm, table length: 914 mm, The machine's tool changer is defective. The repair costs for this are approximately €8,000 - €10,000. The axis wear corresponds to the typical wear for a machine of this year of manufacture. TECHNICAL DETAILS Travel Paths X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Length: 914 mm Width: 356 mm Max. table load: 680 kg Spindle Spindle taper: SK-40 Spindle drive: 22.4 kW Speed: 12,000 rpm Tool Changer Tool changer: 24+1 magazine positions Feed Rates Rapid traverse: 35.6 m/min MACHINE DETAILS Electrical Data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum load: 70 A Short-circuit interrupting capacity: 10,000 A Short-circuit current: 5,000 A RMS symmetric Operating Dimensions Max. operating height: 2,667 mm Max. operating width: 3,175 mm Max. operating depth: 2,769 mm EQUIPMENT Key switch for program lock Synchronized thread tapping 208-liter coolant system with continuous coolant supply Njdpfx Adjw Axkyj Hjwp 15" color LCD monitor with USB port

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand HAAS Model na Main Drive Tool taper BT40 Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm This 4-axis HAAS VF-4SS was manufactured in 2018, featuring a working area of 1250 × 508 × 635 mm and a spindle speed of 12,000 rpm. It includes a 24 + 1 tool magazine and a BT40 taper. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Application Types Nsdpfxexd H Umj Ad Howp Milling

Condition: good (used), Year of construction: 1999, Machine is in good condition. Nedpfjwx Rafsx Ad Howp X 750 mm Y 400 mm Z 500 mm 10.000 rpm

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 15,200 m/min, rapid traverse Y-axis: 15,200 m/min, rapid traverse Z-axis: 15,200 m/min, tool length: 406 mm, tool diameter: 127 mm, tool weight: 5,500 g, General Technical Data Sheet Brand: HAAS Model: VF-6B/40HE Category: Vertical Machining Centres Year of manufacture: 2004 CNC Control: HAAS CNC Machine weight: 10,116 kg Machine Dimensions: Length: 4,900 mm Width: 2,800 mm Height: 3,300 mm Spindle Nwedpfx Adjxfavyj Hop Taper size: ISO-40 Spindle speed: 10,000 rpm Spindle motor power: 15 kW Working Capacity X-axis travel: 1,626 mm Y-axis travel: 813 mm Z-axis travel: 762 mm Distance between spindle nose and table surface: 102 – 864 mm Table Table dimensions: 1,626 x 711 mm Maximum table load: 1,814 kg Feed Rates Rapid traverse (X / Y / Z): 15,200 mm/min Working feed (X / Y / Z): 12,700 mm/min Tool Changer Tool taper: DIN 69871-A40 Tool holder shank: DIN 69872-A40 Tool magazine capacity: 24 positions Max tool diameter (adjacent tools / empty pockets): Ø67 mm / Ø127 mm Max tool length: 406 mm Max tool weight: 5.5 kg Additional Equipment Contact tool setter installed on the table with RENISHAW workpiece probe High-pressure coolant pump through spindle Coolant catch tank with wash-down pump Screw-type chip conveyor Manuals, electrical diagrams, and CE Declaration included

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 13378, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 500 m/min, rapid traverse Y-axis: 400 m/min, rapid traverse Z-axis: 400 m/min, spindle speed (max.): 7,500 rpm, Working machine. Being Used every Day Nwedpfexlikaex Ad Hep

Condition: good (used), Vertical milling machine Toolroom type Haas TM-1P, year 2020 Nodpfxew Snzro Ad Hewp

Condition: excellent (used), functionality: fully functional, machine/vehicle number: M.-Nr.: 2707, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 280 mm, controller manufacturer: Siemens, controller model: SINUMERIK-System 840D, table width: 440 mm, table length: 1,000 mm, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 12,000 W, number of slots in tool magazine: 10, mount diameter: 50 mm, CNC Tool Grinding Machine HAAS Multigrind Condition: Very good. Operated exclusively with oil. Robust 5-axis universal tool grinding machine with a grinding length of up to 700 mm. Njdpfx Ajw Ini Uod Howp Equipment and accessories: - Siemens 840 D control system - 10-position grinding wheel changer - Direct measuring systems - Automatic fire extinguishing system Technical data: - Grinding length up to 700 mm - Diameter up to 400 mm - Height up to 280 mm - Table size 1,000 x 440 mm - Spindle speed up to 8,000 rpm - Spindle power: 12 kW - Tool holder: SK 50 - A-axis up to 600 rpm - Weight approx. 6,500 kg For any questions, please feel free to contact me. Harald Eble Mobile: +49 (0) 162 238 777 4

Condition: excellent (used), Year of construction: 2005, Travels X-travel 559 mm Y-travel 635 mm Z-travel 559 mm Spindle Max. rated power 22.4 kW Max. speed 8100 rpm Max. torque 122.0 Nm 2000 rpm Drive system: Inline direct drive Taper: CT40 / BT 40 / HSK-A63 Bearing lubrication: Air/Oil Injection Cooling: Air-cooled Integrated 4th axis (B-axis) 90° rotation time (full 4th) 3.0 s Max. load capacity on clamping surface 400 kg Rotational torque (continuous) 575 Nm Backlash 30 arc-sec Gear ratio 106:1 Braking torque 3390 Nm Minimum resolution 0.001° Switching accuracy ± 15 arc-sec Repeatability 10 arc-sec Nwodswmmz Uspfx Ad Hjp Rapid traverse speed at B 150° sec Feed rate Max. feed for machining 21.2 m/min. Rapid traverse speed at X 35.6 m/min. Rapid traverse speed at Y 35.6 m/min. Rapid traverse speed at Z 35.6 m/min. Axis Drives Max. X Thrust 15035 N Max. Y Thrust 12500 N Max. Z Thrust 15035 N Tool Holder SK 40 Coolant Tank Capacity 360 L Tool Changer Capacity 30+1 Tools Max. Tool Diameter 64 mm Max. Tool Length 305 mm Max. Tool Weight: 5.4 kg Tool-to-Tool Change Time: 2.8 s Chip-to-Chip Change Time: 3.6 s Air Requirements Required Air Flow† 255 L/min. 6.9 bar Air Hose (inline) 1/2 in. Air Coupling 1/2 in. Minimum Air Pressure 6.9 bar Electrical Specifications Spindle Speed 8100 rpm Inline Direct-Drive Drive System Spindle Power 22.4 kW AC Input Voltage (Three-Phase) – Low 220 VAC Full Load Current (Three-Phase) – Low 70 A AC Input Voltage (Three-Phase) – High* 440 VAC Full Load Current (Three-Phase) – High* 35 A * The "High" specifications refer to machines designed for higher input voltages. Dimensions Length x Width x Height 4800 x 2540 x 2840 mm Weight 7947 kg

Condition: good (used), Parts on table not come. Marked with red. Nodpfx Adewxdyxe Hewp

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1096687, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 1,200 mm, table length: 400 mm, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Travel X-axis: 1,016 mm Travel Y-axis: 508 mm Travel Z-axis: 635 mm Table size: approx. 1,200 x 400 mm EQUIPMENT - Tool changer - Chip conveyor Njdpfjwqcq Hox Ad Hjwp - Swivel axis - Oil mist extraction Further details according to manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 794 kg Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.9 x 2.7 x 2.7 m Weight: approx. 5.7 t

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1127626, table width: 400 mm, table length: 600 mm, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Table size: 400 x 600 mm EQUIPMENT - Chip conveyor - Tool changer Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 Further details according to manufacturer - without guarantee Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Tool taper: BT 30 T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Njdpfx Aowqcqyed Howp Tool changer: double gripper Tool diameter: 51 mm Tool length: 178 mm Tool weight: 2.5 kg Tool slots: 20+1 Machine dimensions: approx. 2.6 x 1.7 x 2.6 m Machine dimensions transport: 2.5 x 2.0 x 2.5 m Weight: approx. 2.4 t

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1140165, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 EQUIPMENT - Tool changer - Chip conveyor - Swivel axis Nwedpfx Adjwqcqtj Hop Further details according to manufacturer - without guarantee Travels X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table size: 864 x 381 mm T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t