Used Heavy Duthy Lathe for sale (9,752)

Condition: used, Year of construction: 2013, Technical details: Lhodouyp Enepfx Al Neh faceplate diameter: 800 mm power requirement: 110 kW weight of the machine ca.: 37.000 / total 52.000 t transport measurements machine: 5,07 x 2,98 x 3,90 m clamping diameter: 800 mm : Ø 800 x 720 mm Tool bore: Capto C6 tools in tool magazin: 2 x 80 With C-Axis *

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 2950 mm swing diameter 3200 mm turning height 3500 mm table load 20 t feed range 3000 mm/min main drive motor 70 kW milling drive 16,1 kW Additional information * CNC-control FAGOR 8070 * C-axis with 360,000 positions * Milling head Lhodpfx Aljzdrc Ae Nsh Inspection under power in the factory possible. Machine location is Spain.

Condition: excellent (used), Year of construction: 2008, turning height: 2,600 mm, total height: 9,500 mm, total width: 5,000 mm, total length: 13,500 mm, rotary table diameter: 5,000 mm, Carousel lathe BERTHIEZ - JO-9375 MACH-ID 9648 Make: BERTHIEZ Type: JO-9375 Year: 2008 Displacable table 5000 mm 4 Table jaws 4 Table extentions  Overhauled in 2008 CE-Mark  X Traverse leadscrew replaced Servo engines and Linear scales Under power in North Spain Max. turning Ø: 10500mm Table Ø: 5000mm Single column or double column:Singel Moving table or column: Moving Chuck Speeds / ranges: 60Rpm Maximum turning height: 2600mm Length: 13500mm Width: 5000mm Height: 9500mm Lhodpfx Aozcx Ttol Nsh Weight: 93000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 Lsdpfxszgczbj Al Njhh - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: like new (used), Year of construction: 2019, Hyundai WIA L280LM CNC Lathe – Year of Manufacture 2019 Used Hyundai WIA L280LM CNC lathe from 2019, suitable for precise and efficient turning and milling operations. Equipped with powered tools, a C-axis and a 12-position turret, allowing complex parts to be machined in a single setup. The machine is known for its robust construction, reliability and high productivity, and is ideal for series production and precision machining. Ljdpfxszgklue Al Nshh Year of Manufacture: 2019 Type: Hyundai WIA L280LM Condition: Used, well-maintained.

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Lsdezav N Tjpfx Al Nohh Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Lhedpfxszav D Dj Al Neh Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 11,000 h, load capacity: 16,000 kg, lifting height: 4,250 mm, fuel type: diesel, mast type: duplex, power: 147 kW (199.86 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load center: 1200 Fork width: 200 mm Fork thickness: 100 mm ISO class: Terminal West Mast type: Duplex Condition: Ready for operation and fully functional Lhedpfxezd H Ugj Al Nsh Technical condition: very good

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 13,300 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,185 mm, power: 157 kW (213.46 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,500 kg, total length: 5,470 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift - diesel Load center: 1200 ISO class: Terminal West Mast type: Duplex Transmission: Clark 13.7HR28316 Condition: Operational and fully functional Lhjdozd H T Aspfx Al Njh Technical condition: good Front tire size: 12.00-20 Rear tire size: 12.00-20 Sideshift, fork positioner,

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 10,993 h, load capacity: 13,600 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, power: 140 kW (190.35 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,100 kg, total length: 5,150 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift – diesel Load centre: 1200 Lsdpfxezd H Tvs Al Njhh Mast type: Duplex Transmission: Clark HR28000 Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Superelastic Front tyres size: 12.00-20 Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres size: 12.00-20 Rear tyres condition: 20 - 40% Sideshift, fork positioner, hydraulic sideshift + fork positioning

Condition: good (used), Year of construction: 2006, Pallet racking system, Jungheinrich, frame height approx. 8m, 500kg/pallet location, approx. 4,632 locations – used: Price ex-location: €49,500 (net), disassembled, packaged and loaded! Price for larger quantities: upon request! Hall 4 Manufacturer: Jungheinrich Type: B Year of manufacture: 2006 Number of frames: approx. 204 Upright profile: B13 Frame depth: approx. 1.10m Frame height: approx. 8.25m Frame width: approx. 8cm Beams: Length: 3.60m = approx. 1,908 Load capacity per level: 2,000kg = 500kg per pallet Bay load: 8,000kg at max. bay height: 2m Lhsdjzd Tzyjpfx Al Nsh In the event of complete purchase, including existing end-of-aisle protection/side protection, spacers, etc. Whether the grid decking shown is included needs to be clarified. Condition: good Available: from approx. September 2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Pallet racking system, Dexion, frame height approx. 10m, 1 ton / pallet space, approx. 8,824 spaces – used: Price ex works: €99,500.00 (net), dismantled, packaged, and loaded! Price for larger quantities: upon request! Hall 5 Manufacturer: Dexion Type: Speedlock P90 Year of manufacture: 2014 Number of frames: approx. 482 Frame depth: approx. 1.10m Frame height: approx. 9.80m to approx. 10.20m Frame width: approx. 12cm Crossbeams: Length: 3.60m = approx. 3,448 pieces Load capacity per level: 4,000kg = 1,000kg per pallet Field load: 16,000kg Lowest shelf height: 2.70m In the event of a complete purchase, includes existing end-of-aisle protection / side protection, rear wall grating, and spacers. Lhodpfx Alozd Tvdj Neh Condition: good Available: from approx. September 2026 Location: Hamburg

Condition: good (used), Year of construction: 2006, Pallet racking, Nedcon, approx. 9.70m high, min. 1 ton / pallet. Approx. 9,700 pallet spaces - used: Price ex works: €109,500 (net), disassembled, packaged, and loaded! Price for larger quantities: upon request! Hall 6 Manufacturer: Nedcon Type: NR1 Year of manufacture: 2006 Number of frames: approx. 608 pieces Frame height: approx. 9.70m Frame depth: approx. 1.10m Frame width: approx. 12cm Crossbars: Length: 1.80m = 168 pieces Length: 2.70m = approx. 2,184 pieces Lhsdpfxozd Ttvo Al Neh Length: 3.60m = approx. 2,142 pieces Crossbar height: approx. 12cm Bay height: 2,700mm Crossbar length: 2.70m: Bay load, level 1: 3,600kg Levels 2, 3, 4: 3,000kg Field load: 12,000kg Crossbar length: 2.70m: Crossbar length: 3.60m: Bay load, level 1: 4,800kg Levels 2, 3, 4: 4,000kg Field load: 16,000kg In case of complete purchase, including existing end-of-aisle protection / side protection. Condition: good Available: from approx. September 2026 Location: Hamburg

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: Lodpfxozgbb Ho Al Nshh - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Lhsdpfx Aoxrg S Isl Noh Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: good (used), steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Make: VDF Wohlenberg Type: U1270 Length:1400mm Width:800mm Height:1500mm Lhsdpszcn Srofx Al Nsh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2018, conveyor belt length: 4,000 mm, conveyor belt width: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, total height: 650 mm, overall weight: 6,000 kg, Heavy Duty industrial trailer PLAN - Type 80-8 MACH-ID 9411 Make: PLAN Type: Type 80-8 Year: 2018 All axels are steering 4 shaft with 8 wells = 32 units Left and Right boom triangle use Lhjdpfx Alezcn Dno Njh Platform height: 650mm Platform length: 4000mm Platform width: 2000mm Max. loading capacity:60T Number of axes: 4 Number of wheels: 32 Wheel Ø: 425mm Length: 4000mm Width: 2000mm Height: 650mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1970, spindle bore: 105 mm, turning diameter over bed slide: 1,600 mm, turning length: 8,000 mm, total length: 13,210 mm, total width: 2,420 mm, total height: 2,400 mm, bed width: 1,100 mm, rotational speed (max.): 224 rpm, overall weight: 33,000 kg, workpiece weight (max.): 25,000 kg, Centre lathe POREBA - TCC160 MACH-ID 8822 Make: POREBA Type: TCC160 Year: 1970 Work load supported 2 steady 25.000 Kg Work load not supported 16000 Kg incl. 4 Chuck 1600 mm incl. 2 x Steady rest incl. internal grinding attachment incl. external grinding attachment Lhedpfxezcm Rmj Al Noh incl. milling saddle support DBC Turning Length: 8000mm Swing over bed Ø: 1600mm Swing over cross slide Ø:1250mm Spindle bore: 105mm Spindle power: 55kW Bed width: 1100mm Tailstock spindle Ø: 220Ø Stroke pinole: 600mm Spindle taper: Metric 80Mk Speeds / ranges: 224Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 5000mm/min. Workpiece load: 25000 Length: 13210mm Width: 2420mm Height: 2400mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Heavy duty pallet Lhodpfjma Dagox Al Noh L.1250 x W.1050 mm Height 140 mm board thickness : 35 mm weight 44,5 kg several available

Condition: excellent (used), Heavy duty wooden pallets with 3 skids accessible from 4 sides length 1680 mm width 1250 mm board thickness 45 mm Ljdel Uvv Topfx Al Nohh weight 82,5 kg several available

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 YEAR 1987 center height 255 mm turning diameter over support 300 mm center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain motor 380 volt 11 kw Lhjdpjpviqijfx Al Noh transport dimension: length 3200 mm width 1200 mm height 1550 mm Weight 2,5 to.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 04/1982, loading space length: 12,250 mm, loading space width: 2,420 mm, loading space height: 1,050 mm, total length: 12,500 mm, total width: 2,450 mm, total height: 2,450 mm, suspension: steel, tire size: 385/65-R22.5, Year of construction: 1982, = Additional Options and Accessories = - Leaf spring suspension - Drum brakes = Notes = Lhodpfx Aljzfaigj Njh 1982 STAS HEAVY DUTY platform trailer with ROR axles with drum brakes, 7-leaf leaf spring suspension, robust chassis, hardwood floor, 2 heavy-duty tie-down points on the side members, 2 x 3 tie-down points in the center, loading area dimensions: 12.25 x 2.42 m (L x W), front wall height 1.05 m, 3.5-inch kingpin, unladen weight 6,390 kg, permissible total weight: 32,000 kg, tires 385/65-R22.5 (L: 7/7/12 mm; R: 8/13/13 mm), Belgian registration with valid main inspection until 03/14/2027 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: ROR DRUM Brakes: Drum brakes Suspension: Leaf spring suspension Rear axle 1: Max. axle load: 8000 kg; tire tread depth left: 45%; tire tread depth right: 50% Rear axle 2: Max. axle load: 8000 kg; tire tread depth left: 45%; tire tread depth right: 80% Rear axle 3: Max. axle load: 8000 kg; tire tread depth left: 75%; tire tread depth right: 80% Weights Unladen weight: 6,390 kg Payload: 25,610 kg GVWR: 32,000 kg Functional Body brand: STAS 0-3-32-B-ST55 Maintenance, History and Condition APK (Technical Inspection): valid until 04/2027 Technical condition: very good Optical condition: good Additional information Please contact Arne Honingh for further information.

Condition: good (used), turning length: 5,038 mm, spindle motor power: 80,000 W, spindle bore: 122 mm, travel distance X-axis: 490 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 5,038 mm, total height: 3,300 mm, total length: 16,000 mm, total width: 4,900 mm, overall weight: 30,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/5000 MACH-ID 9642 Make: HEYLIGENSTAEDT Lhsdpfxszcmzxe Al Njh Type: Heynumat 35/5000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: +180 to -5038mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 4900mm Height: 3300mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total length: 6,800 mm, total width: 2,200 mm, total height: 2,000 mm, Empty weight: 11.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 630 - Swing over bed [mm]: 1300 - Carriage turning diameter [mm]: 1000 - Distance between centres [mm]: 4000 - Bed width [mm]: 700 - Spindle bore [mm]: 120 - Min. spindle speed [rpm]: 2.8 - Max. spindle speed [rpm]: 400 - Options: Four-jaw chuck, Three-jaw chuck, Removable bed, Quick-change tool post, Fixed steady, Travelling steady - Swing over removable bed [mm]: 1700 Ljdjx Iriaspfx Al Nehh - Transport dimensions: 6800mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2002, turning length: 6,000 mm, spindle bore: 122 mm, travel distance X-axis: 90 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 6,110 mm, rotational speed (max.): 2,200 rpm, total height: 3,300 mm, total length: 16,000 mm, total width: 5,300 mm, overall weight: 32,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/6000 MACH-ID 9643 Make: HEYLIGENSTAEDT Type: Heynumat 35/6000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: -180 to +6110mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW ATC / revolver: 100 B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 5300mm Height: 3300mm Lhjdpfx Alszclqlo Njh Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!