Used Heraeus Furnace for sale (63)

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Hsdpferbiyfjx Aadsfc Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Hfodpfxjrknagj Aadsc Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Hsdpfx Ajrm Riheadefc Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTL 60/60 The Vötsch VTL 60/60 is an industrial heating and drying cabinet, specifically designed for the safe drying of coated materials, such as paints and resins. It meets the safety requirements of EN 1539 and is therefore suitable for processes where flammable solvents may be released. Technical specifications: Usable volume: 0.216 m³ (600 × 600 × 600 mm) Nominal temperature: 250 °C Maximum heating surface temperature: over 750 °C Nominal power: 7.2 kW Connected load: 8 kW Minimum exhaust air flow rate: 102 m³/h External dimensions (L × W × H): 1150 × 1000 × 1700 mm Weight: approx. 250 kg Safety features: The VTL 60/60 is equipped with a powerful recirculation fan, which ensures even temperature distribution and effective dilution of solvent vapors. This prevents the formation of explosive atmospheres and ensures safe operation. Condition: Used Scope of delivery: (See image) Hjdewgcxcspfx Aadefc (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), LH SOGEV / LEYBOLD-HERAEUS Membranovac 1VS pressure gauge, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Hodpfxsi Ebykj Aadsfc

Year of construction: 2007, condition: like new (used), functionality: fully functional, Special Opportunity! Only ONE unit left! We are able to offer you this top-quality Thermo / Heraeus B 6200 incubator, in mint condition, from the inventory of the State of Thuringia. The B 6200 is one of the most reliable units on the market and has become indispensable in laboratories worldwide. Known for its high precision, it is also regarded among professionals as especially robust and durable. This device was purchased new by the State of Thuringia in 2007 and has since only been operated annually for calibration purposes. Its condition is immaculate both visually and technically – see photos. A particular highlight is the enhanced specification, far surpassing the standard model: this B 6200 features additional safety switches, a timer, and microprocessor-controlled temperature regulation. The price refers to one incubator with the described equipment and an internal shelf as shown. Technical Data: Thermo / Heraeus B 6200 incubator Manufacturer: Thermo / Heraeus, Made in Germany Internal volume: 196 liters. Temperature range up to 70°C. Fresh air and exhaust ports. External dimensions (W x H x D): 895 x 816 x 715 mm Internal dimensions (W x H x D): 554 x 644 x 550 mm Weight: approx. 90 kg 230 V, 50 Hz, 2.6 A, 0.6 kW Features: Digital temperature controller with microprocessor monitoring, over- and under-temperature protection. Timer. Stainless steel inserts. Hfjdpfswcznbox Aadjc Applications: Microbiological incubation in pharmaceutical, medical, and microbiological laboratories; hygiene testing in pharmaceutical, food, and cosmetics industries; long-term storage tests; and more. This offer is directed exclusively at commercial customers. An invoice with VAT shown will be provided. Private buyers may purchase the unit "on behalf of a customer." Direct commercial sale to private individuals is expressly ruled out. The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims due to gross negligence or intentional misconduct by the seller, or any injury to life, limb, or health. Shipping will be arranged within three working days of payment receipt via freight carrier. Alternatively, you may collect the device from our premises by appointment during business hours. Total shipping weight including accessories and pallet is approx. 110 kg. If you have any questions, please contact us directly using the details provided.

Year of construction: 1985, condition: used, Hardening furnace Heraeus Type KM 260 Hodpfx Asgtxuqsadefc width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c

Year of construction: 2018, condition: excellent (used), Heraeus Kendro HeraCell 150 Co2 Incubator Technically and optically as good as new HeraCell 150 incubator HERAcell has instead of the instead of the usual water tray new type of water reservoir. This ensures high relative humidity (rH) and, above all and above all for short moisture recovery times. Compared to conventional CO2 incubators with water trough HERAcell achieves a moisture recovery time up to five times faster humidity recovery time. Consistent humidity Short humidity recovery times play an important role, especially when the the door of the incubator has to be opened frequently door must be opened frequently or volumes of media are processed. For devices with a water tray the air layer between the bottom and tray prolongs the moisture recovery time. The result is high evaporation rates in the cultures. Hfedpoiv S E Uefx Aadjc HERAcell, on the other hand, ensures very short - up to five times times faster - thanks to superior thanks to superior technology: - Large water surface area (due to the use of the entire inner chamber floor) - Direct heat transfer from the heated floor into the humidifying water - Patented floor heating after after door opening and during O2 gassing Early water level alarm The water level is continuously monitored monitored, and an acoustic and and optical alarm signals signals in good time that water needs to be needs to be topped up. ContraCon - decontamination with moist heat at 90 °C The patented automatic decontamination system specially developed and patented for Heraeus incubators ContraCon decontamination routine has been proven in independent independent tests at 90 °C and high and high humidity to eliminate a large number of microorganisms, including mycoplasmas completely eliminated

Year of construction: 1999, condition: good (used), Chamber hardening furnace K 1150-2 Rated temperature: 1150 °C, 5.0 kW 400 Volt Usable space: 225 mm width, 215 mm height, 300 mm depth External dimensions: 525 x 595 x 650 mm Heating-up time: 2.5 h 75 kg Hfedpfx Aasxwqhkodoc With base frame

Year of construction: 1999, condition: used, machine/vehicle number: 99116961, Technical specifications: Hfjdpfx Aaex E Ubgedoc - Rated / continuous temperature up to 1150 °C - Infinitely variable temperature control - Temperature display - Drive: 400 V / 5 kW - Internal dimensions approx.: W 160 x H 160 x D 360 mm - Required space approx.: W 850 x H 700 x D 600 mm - Weight approx.: 140 kg

Condition: good (used), Heraeus Thermo UT 6060 Drying Oven For sale is a used laboratory heating oven from the renowned brand Thermo – type UT 6060, made in Germany. Technical details: Model: UT 6060 Order number: 51014393 Factory number: 40588846 Max. temperature: 300°C Supply voltage: 230V Frequency: 50Hz Power consumption: 1.64kW Current consumption: 7.1A Protection class: Class 2 Protection type: IP 20 Temperature protection: DIN 12880/1 Connection type: 1N/PE Origin: Made in Germany (Langenselbold) Condition: Used, fully functional. Externally, it shows slight signs of wear (see pictures). Find more items in other sizes—new and used—in our shop! Hfodpfjxl Dl Sjx Aadec International shipping available upon request!

Condition: good (used), Heraeus Kendro UT 6120 Drying Oven For sale is a used laboratory heating oven from Kendro Laboratory Products – model UT 6120, manufactured in Hanau, Germany. This unit is ideal for laboratory applications, drying, heating, and material testing up to 300°C. Technical details: Model: UT 6120 Order number: 51008822 Factory number: 99108504 Max. temperature: 300 °C Supply voltage: 230 V Frequency: 50 Hz Power consumption: 2.4 kW Current consumption: 10.2 A Protection class: Class 2 Protection type: IP 20 Temperature protection: DIN 12880/1 Connection type: 1N/PE Origin: Made in Germany (Hanau) Condition: Used, with slight signs of wear (see pictures). Hfedpfx Asxl A Tbjadec You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Heraeus Thermo UT 6200 Drying Oven For sale is a used laboratory heating oven from the renowned brand Thermo – type UT 6200, made in Germany. Technical details: Model: UT 6200 Order number: 51001655 Factory number: 8907974 Max. temperature: 300°C Supply voltage: 230V Frequency: 50Hz Power consumption: 2.60kW Current consumption: 11.8A Protection class: Class 3.1 Hfedpfxsxlrzzj Aadsc Protection type: IP 20 Temperature protection: DIN 12880/1 Condition: Used, fully functional. Slight signs of wear on the outside (see pictures). You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Trivac D 30 A & S 30 A Hfedpob Ii E Defx Aadec Voltage: 400V / 50Hz Suction capacity: approx. 30 m³/h Ultimate pressure: approx. 5x10e-3 mbar & 5x10e-2 Status: Refurbished Warranty: 12 months Accessories: Instruction manual Mineral oil filling Quantity: several available Delivery time. from stock

Condition: good (used), Heraeus Minifuge RF Analogue temperature setting: -40 to 30°C Hjdpehty D Rjfx Aadsfc Speed 0 to 6000 rpm, analogue adjustable Timer 0 to 60 min or continuous Rotor Sepatech 3360 for 4 inserts, max. speed 6000 rpm Brake function Automatic unbalance cut-off Automatic lid lock during use Dimensions: approx. 68 x 67 x 56 cm (W x H x D) Weight: 70 kg Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, machine/vehicle number: 93110209, Heraeus UT6420 Oven Volume: 409 liters Temperature range: up to 300°C Hsdpfx Aaoxxiyhjdofc Product No.: p1240 Purchased in 2021 (used). The oven has been tested by us. However, it has not been used much, as our smaller Heraeus unit was sufficient. Purchase invoice is attached.

Condition: used, El. heated chamber oven, make Heraeus Hfsdjxlr Nlopfx Aadec Type: T 340 Temperature: 250°C Clear dimensions (W x D x H): 300 x 280 x 270 mm

Condition: used, El. heated chamber oven, make Heraeus Hsdpfxexlruzo Aadsfc Type: BT 5042 Temperature: 250°C Clear dimensions (W x D x H): 390 x 285 x 350 mm

Condition: used, El. heated chamber oven, make Heraeus Type: PL 320 Temperature: max. 650°C Hfjdjxlq Tpopfx Aadoc Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm

Year of construction: 1981, condition: used, machine/vehicle number: 23066, temperature: 0 to +120°C usable space: width 1000 mm depth 950 mm height 800 mm electrical connection: 380 V, 9,5 kW Hfodpfx Ao Dqz Readec space needed: 1730 x 2330 x 1980 mm high weight approx. 1000 kg

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° MARCELS MASCHINEN AG Hedpow Nnqusfx Aadofc

Year of construction: 1989, condition: used, max. temperature 1000 Grad size of opening 170 x 90 mm depth of chamber 280 mm total power requirement 3 kW weight of the machine ca. 80 kg dimensions 0,7 x 0,55 x 0,72 m Hfjdpetqqptefx Aadoc

Condition: like new (used), The Heraeus Primo R Refrigerated Centrifuge is the perfect centrifuge solution when performing routine analysis in different types of labs. This unit brings you flexibility, efficiency and functionality in a compact, high-performance system all designed to accelerate your sample processes. The Primo R features an imbalance recognition system for improper loading, an EASYcontrol® II control panel for user comfort and user-friendly technology with automatic rotor recognition system. To complete this instrument, we offer a complete selection of rotors and adapters to meet the needs of any lab. Product Features: Touch keypad microprocessor control (EASYcontrol II) Digital display shows all run parameters Variable speed/RCF/time control Hfodpfjii Ahxsx Aadoc QUICK RUN key for short spins Choice of 2 acceleration and 9 braking curves for sensitive samples Memory retains current settings With optional rotor/adapter combinations, accept tubes from 0.2 to 100mL Specifications: Capacity: 400mL (4 x 100mL) Max RCF: 21,885 x g Max Speed: 15,000 rpm; adjustable in increments of 10 Max Noise Level:

Year of construction: 1985, condition: used, degree 650 working heigth 250 mm length 250 mm width 250 mm depth 450 mm Hfsdpfx Aajt Hw Tfjdsc total power requirement 8 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Internal dimensions: 600 x 600 x 600 mm Max. Temperature 70°C Hodeh Eilvjpfx Aadsfc