Used Hot Press for sale (15,184)

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s Hjdsykawcepfx Aadsfc

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Hsdpfx Asykavxjadjfc Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: excellent (used), Rijva EP 180 180 tons Hfsdpfx Aasx Ic Umsdsc 50 strokes/min. Adjustment 28 - 140 mm Weight 12,000 kg

Condition: used, Year of construction: 1981, pressure 100 t punching cross-cut in cmm -- stroke 100 mm throat 510 mm work height max. 1100 mm Twist power 31 Durchm. in 25 mm channels - flange 100-400 mm Number of ventilators 80-400 mm Hsdpfsvgnnqjx Aadsfc 100-400 mm 100-550 mm punch stroke bei 20 mm Hub: 60 p.Min sheet thickness max. bei Luftbiegung: 10 mm total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,7 x 0,9 x 2,3 m Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 480 - 4045 mm 4 pieces less used of upper tools: tool No 5 length: 3050 mm, dimensions see sketch, price = 710,- Hodpfx Aouh E Rysadsfc tool Nr 6 Length: 3073 mm, dimensions see sketch, price = 970,- tool No 9 L = 1925 mm divided, dimensions see sketch, price = 850,- tool Nr.10 length: 1520 mm, dimensions see sketch, price = 850,- Prices excl. VAT Machine dealer with own stock of 1600 m².

Condition: used, pressure ca. 5 t dayligth 110 mm throat 40 mm weight of the machine ca. ca. 50 kg dimensions of the machine ca. 1,2 x 0,5 x 1,3 m 6 t (estimaeted) hand-operated spindle press. The machine is professionally Hfodsxr Ravepfx Aadjc and durably lashed. Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 3050 - 4020 mm 4 pieces of upper tools for press brake: Hfsdpfx Aaova I Spodoc Deer foot upper tool No.1, picture. No. 2: Dimensions: 3000 x 75 mm, price = 670,-- Deer foot upper tool No.2, picture. No. 3: Dimensions: 3000 x 120 mm, price = 670,-- Deer foot upper tool No.2 length: 4020 mm, dimensions see sketch, price = 780.-- (Image 5 & 6) Deer foot upper tool No.4 length: 3050 mm, dimensions see sketch, price = 650.-- Prices plus VAT (Image 7 & 8) Machine dealer with own stock of 1600 m².

Condition: used, pressure 6 t dayligth 180 mm spindle diameter 32 mm throat 115 mm ram stroke 90 mm table surface area 300x270 mm weight of the machine ca. 70 kg dimensions of the machine ca. 800 x 1350 mm 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Hfjdovgnnwopfx Aadec Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 1370 mm Various tooling: 65 x 40 mm with 4 openings: 8, 10, 10, 35 mm. 6 pieces: 1370 mm Prices excl. VAT Hjdpfxoul Ew Ae Aadofc Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 3055 mm Various tooling: 2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, - Tool No. 4:_ 60 x 40 mm with 4-fold opening: 30, 10, 9, 7 mm, length 3050 mm, Price €750. No. 3: Bottom rail for split bottom tools (matrices) 80 x 30 mm, opening 40 mm, length 3050 mm, price €350 Tool 70 x 70 mm with 4-fold opening: 10, 10, 20, 30 mm. Hfsdpfx Aova I S Aoadoc 2 pieces: 1500mm and 1300mm. Price €750. (Photo 5 & 6) Prices excl. VAT Machine dealer with own stock of 1600 m².

Condition: used, stamp capacity 2 - 63 mm throat 110 / 200 mm Various Destaco punching iron, some with accessories: No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. Hedpfx Aasuu S Dnsdjfc We can also sell each of them. Machine dealer with own stock of 1600 m².

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Hfedsyabf Hspfx Aadec

Condition: ready for operation (used), controller manufacturer: TS, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 2,900 mm, total width: 1,850 mm, total height: 2,620 mm, power: 13.5 kW (18.35 HP), travel distance Z-axis: 115 mm, empty load weight: 3,150 kg, passage width: 2,050 mm, 3 axes: Y1 / Y2 / X touchscreen control Willa upper tooling Capacity: 40 ton x 2050 mm Hsdpfoyf Ruhox Aadefc Backgauge: CNC Locking speed: 90 mm/sec

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 300 mm, operating speed: 10 mm/s, reverse speed: 79 mm/s, power: 20 kW (27.19 HP), travel distance Z-axis: 200 mm, empty load weight: 10,000 kg, passage width: 2,550 mm, 6 axes: Y1 / Y2 / X / R / Z1 / Z2 upper and lower hydraulic clamping Willa/Modufix tooling Hodpfx Aaeyf Ru Isdofc 2D touchscreen control Capacity: 110 ton x 3100 mm Backgauge: CNC Locking speed: 100 mm/sec

Condition: ready for operation (used), controller manufacturer: Cadman Touch-B, throat depth: 350 mm, installation height: 500 mm, operating speed: 10 mm/s, reverse speed: 80 mm/s, total length: 5,545 mm, total width: 1,990 mm, total height: 3,380 mm, power: 30 kW (40.79 HP), travel distance Z-axis: 250 mm, empty load weight: 23,000 kg, passage width: 3,150 mm, table width: 250 mm, 5 assen: Y1 / Y2 / X / R / V Laserbeveiliging voor en achter CNC-bombering boven- en onderaan LVD-tooling opname Capacity: 250 ton x 4100 mm Backgauge: CNC Locking speed: 80 mm/sec Hedpfx Aaoyf Rt Rsdefc

Condition: used, Year of construction: 2000, ram adjustment: 120 mm, table width: 840 mm, table length: 1,500 mm, pressing force: 260 t, compressed air connection: 9.807 bar, stroke length: 250 mm, air pressure: 9.807 bar, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Hedpfx Aaoykbcmodsfc Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2021, Food Tools CP-1H half sheet product press Serial: 6341 Hjdpjrza Duefx Aadefc 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press

Condition: excellent (used), Manesty D3B tablet press Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph Hedpfx Aaeiy Nn Ijdjfc

Condition: like new (used), Manesty D3B tablet press Serial: 24D117 Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph Hodpfx Aaeiy Nnyjdofc

Year of construction: 2002, condition: used, Formaco meat former press Hodpfeb Uaiysx Aadsfc Model: FLL800/160/1 Serial: 1100 2002, Stainless, Meat former press, votage/Hz 3x400/50, 16Amp

Condition: good (used), functionality: fully functional, Year of construction: 2008, Electromechanical Press Brake Manufacturer: TRUMPF Model: TruBend 7018 Year: 2008 Technical Data Make: TRUMPF Model: TruBend 7018 Year of manufacture: 2008 Pressing force: 18 t Stroke: max. 150 mm Bending length: 510 mm Frame gap: 422 mm Power supply: 5 kVA Space requirements: L 1295 x W 1320 x H 2380 mm Weight: approx. 1,800 kg Standard Equipment - Robust machine frame - Press beam - High-dynamic electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Special Equipment - Tool clamping system (Wila) top and bottom - Integrated TRUMPF TASC 6000 CNC control - Safety light curtain at the front Hjdpeyir Svsfx Aadsfc - Backgauge system: 6 axes: X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety - Side-mounted, pivoting safety doors - Two-pedal foot switch, for both standing and seated operation - CE certification Tooling Upper tool: straight punch R1/86°, H 120 mm, L 500 mm, segmented Lower tool: V-die V6/84°, R 0.6, H 100 mm, L 500 mm, segmented All information given without guarantee. Machine demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Hedpfx Aaoyhgwdedjfc

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Hfedpfx Ajyhgvgeadsc

Condition: good (used), functionality: fully functional, Year of construction: 2017, Hydraulic Press Brake Make: BYSTRONIC Model: Xpert 40/1030 Year: 2017 Technical Specifications Manufacturer: BYSTRONIC Model: Xpert 40/1030 Year of manufacture: 2017 Press force: 40 t Bending length: 1030 mm Stroke: 200 mm Distance between uprights: 1060 mm Motor power: 7.5 kW Dimensions: L 1.52 x W 1.60 x H 2.45 m Weight: 4 t Equipment • 6-axis backgauge • Hydraulic clamping top & bottom • RF-A upper tool holder • Height-adjustable ByVision Bending display with 22'' Full HD touchscreen • Support table • Ergo LED work area lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC interface for bending • Bend curve generator Hfodpeyim Txjfx Aadoc • Automatic tool overload protection • Rear sliding door with electrical monitoring • Oil cooler • Ergo foot switch • Upper tool, straight R1/30°, H 250mm, L 1,000mm, segmented • Upper tool, gooseneck R1.5/85°, H 175mm, L 1,000mm, segmented • Lower tool V10/30°, H 55mm, L 1,000mm, segmented All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2008, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll year of manufacture: 2008 labelling applicators: 2 (wet-glue heads) operation Direction: Right-machine, parallel on one side of the machine production Capacity: 45.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Hedpeyhgqqefx Aadefc