Used Inlet Band for sale (5,651)

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 510 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 2,220 mm, total length: 2,000 mm, total width: 2,850 mm, overall weight: 3,200 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the HBE411A Dynamic bandsaw automaton Band guide components made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This allows for a noticeable increase in the service life of the saw blades. Auto-Feed Control Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed rate and cutting speed. Bdsdpjz Rwx Ijfx Abusi Energy efficient The use of modern drives and a special hydraulic system reduces energy consumption by approximately 30% compared to the previous model. Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Electrically driven chip brush with Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Servo feed system The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Your advantage: higher cutting performance and longer blade life! Automatic guide arm adjustment This provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Easy operation Quick and easy operation of all functions of the bandsaw via touch control. Double clamping device offers process reliability – especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the bandsaw and fix both the initial material and the sections that have just been cut.

Condition: new, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 600 mm, cutting width (max.): 620 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 3,120 mm, total length: 2,900 mm, total width: 2,750 mm, overall weight: 3,200 kg, table height: 1,150 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the LPS-T band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long blade life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force application of the saw feed is located directly below the cutting point. Servo feed system The use of the Behringer servo feed system ensures a constant chip removal rate and makes better use of the capabilities of modern saw blades. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloads and premature wear of the saw blades. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large chip conveyor with an integrated coolant tank. The chips and coolant generated are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be moved out of the machine frame. Adjustable material support table For easy loading and unloading using a crane, the material table under the saw unit can be moved out. NC measuring device Optionally, the LPS-T band saw can be equipped with an NC-controlled measuring device. The cutting depth is digitally pre-programmed in the control panel. The material to be cut can be quickly aligned on the measuring device when placed and then securely clamped. This significantly speeds up the setup process. Fast blade change ensures the shortest setup times. In just two to three steps, the saw blade can be brought into the change position. Blade guide parts made of cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thus increasing the tool life. Compact Due to its compact dimensions, the band saw can be installed even in confined spaces. Driven duplex chip brushes Bodpsz Rzg Ajfx Abusdi effectively clean the saw blade, thereby increasing the tool life. The brushes are automatically adjusted to the saw blade and ensure consistent cleaning performance.

Year of construction: 1995, condition: used, Offered for sale is an automatic horizontal bandsaw with roller conveyor. Control system: Electronic machine control system with display, keyboard and control buttons. Equipped with hydraulic workpiece clamping, material feed system, roller conveyor, safety guards and additional bandsaw blades. Inspection possible by arrangement. Bdsdpfx Absz N Haxouoi

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) Bjdpfx Aol D Rp Eobuodi F2/27 nesting for milling stations

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 380 x 250 mm capacity 90 degrees: square 250 x 250 mm capacity 45 degrees: flat 300 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 200 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min Bsdoxaax Depfx Abuodi dimensions of saw-band 3770 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight 695 kg dimensions of the machine ca. 1950 x 1300 x 200 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band Bedpfx Abexaazxsusdi - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: new, capacity 90 degrees: round 100 mm capacity 45 degrees: round 65,0 mm capacity 90 degrees: flat 100 x 150 mm capacity 45 degrees: flat 60 x 100 mm dimensions of saw-band 1470 x 13,0 x 0,65 mm volt 230 V 45,0 m/min weight 26,0 kg range L-W-H 700 x 320 x 420 mm Bdodpfx Aexaa Apsbusi scope of delivery - saw band - workpiece stop - Quick release vice - Ergonomic handle - Chip collector

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable Bjdpsxaagbofx Abusdi - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm Bdjdpfx Abedcd Dlsuji High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: used, Year of construction: 1978, cutting diameter 260 mm capacity 90 degrees: round 260 mm capacity 90 degrees: square 250 x 400 mm cutting speed 20 - 80 m/min Control konventionell total power requirement 2,0 kW Bsdpfx Aboygxzxsuodi Dimensions (LxWxH) 2,0 x 1,4 x 1,2 m Horizontal band saw, semi-automatic

Condition: used, roll diameter 400 mm throat 900 mm workpiece height 400 mm table-size 700 x 660 mm Bdodpfx Asygx Acobuoi saw band length 4630 mm turning speeds 45 - 500 m/min total power requirement 1,5 kW weight of the machine ca. 0,8 t Dimensions (LxWxH) 1,95 x 0,9 x 2,25 0 Band saw with - Ideal welding machine - Belt grinder - Table tiltable -15° to +45° - Pneumatic height adjustment

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Bdjdpfow Tfw Hsx Abuei Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2022, Roller diameter: 600 mm Outreach of the support: 585 mm Cutting depth: 370 mm Table swivels: yes, from 0 to +20° Table size: 890 x 620 mm Belt speed: 18 m/min Motor power: 2.2 kW / 400V Motor brake: yes / automatic Dust extraction connection: 2 x 100 mm Bedpfshpl Tfox Abuedi Machine length: 1100 mm Machine width: 670 mm Machine height: 2050 mm Weight: 295 kg

Condition: used, Band saw Felder FB510, year of manufacture 2019, very good condition, standard equipment Bjdpfxovr I I Io Abujdi Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, roll diameter 420 mm throat 400 mm workpiece height 285 mm Bdjdpfjw U U Rxox Abuoi cutting speed 15 - 1400 m/min table surface area 500 x 500 mm saw band length 3200-3400x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 1.5 kW weight of the machine ca. 470 kg dimensions of the machine ca. 950 x 750 x 1820 mm Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base

Condition: new, cutting diameter 180 mm capacity 90 degrees: square 180 x 180 mm capacity 90 degrees: flat 200 x 150 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 125 x 110 mm capacity 60 degrees: flat 70 x 70 mm capacity 60 degrees: square 70 x 70 mm capacity 60 degrees: round 70 mm turning speed range: 40 / 80 m/min Bdedexaa Tnspfx Abuji saw band length 2.130 x 20 x 0,9 mm total power requirement 0,75 kW weight of the machine ca. 190 kg Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg Bodpfx Ajxabacobuedi dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: new, cutting diameter 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 150 x 150 mm capacity 45 degrees: flat 150 x 210 mm capacity 60 degrees: round 90,0 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: flat 90 x 100 mm dimensions of saw-band 2455 x 27 x 0,9 mm cutting speed 35 + 70 m/min work height max. ca. 900 mm total power requirement 1,2 kW weight 240 kg range L-W-H 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) * for sawing solid material and profiles - miter cuts up to 60° left possible - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating instructions BERG SCHMID Auto-Cut system = 3-stage system 1. automatic lowering & automatic saw cut 2. manual operation - lowering + saw cut Bdedpfxoxabbge Abuji 3. high-speed lowering of the saw frame - without saw cut

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) Bodexabpwopfx Abujdi - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3.6 kW (4.89 HP), input voltage: 230 V, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: mechanical, overall weight: 11 kg, compressed air connection: 6 bar, working height: 65 mm, The perfect zero joint - for laser edgebands / hot-air edgebands / co-extruded edgebands - Up to 65 mm edge height - Up to 3 mm edge thickness - Mobile or stationary use - Tool-free changeover - Up to 3 mm edge thickness - approx. 4 min heating time - 230 V / 50 Hz Bjdor H Ealopfx Abuodi

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and Bedpfxjzkbn Uo Abusdi . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: good (used), Year of construction: 2006, functionality: fully functional, STENNER MHS9 MK2 HORIZONTAL RE SAW LINE. This complete 9 head line comes with 12 metre infeed and 8 metre outfeed. Tilting heads which are ideal for Feather Edge board production 915MM diameter wheels Max width blade 100MM Saw speed 35M/S Max width timber 305/450MM Max height 305MM Main motors 9x 18.5KW Bdjdpfx Abezwh Hwsuji Variable feed speed 15-60M/MIN Operator control station Also if required we have a Systems TM rotary auto stacker which is avaliable at extra cost All nine heads have new upgraded power feed wheels with sprockets, chain tension rollers and alloy blade guides for improved faster production. All guards have new sawdust exhaust outlets for added fire protection. Comes with 80% of orginal dust extraction trunking and operator cross over steps. All additions/improvements costing over 20k GBP. Comes with blades. It does not come with the cross transfer deck shown in video Production of 1.8m long Feather Edge boards is circa 36 m3 sawn per hr. This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. To be collected by customer from site Northamptonshire UK. Crane lorry essential Offers in excess of £80,000 GBP

Condition: good (used), Year of construction: 1998, functionality: fully functional, Bandsaw automat Behringer HBP 303A / PCM Year of manufacture: 1998 Including magazine for up to 9 tons Magazine dimensions: (L x W x H) 480 x 400 cm Capacity for 9 bars. Length approx. 8 m The bandsaw automat is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range: 260 mm Saw motor drive power: 4 kW Total drive power: 15 kW Cutting speed: 10 - 120 m/min. Machine dimensions (L x W x H): 320 x 260 x 220 cm Bdsdpfx Abjz E Np Hsusi Weight: approx. 2500 kg

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, operating hours: 1 h, Horizontal bandsaw / SÄGMA S-270 G / Demonstration machine -CE marking -Cutting capacity / Round at 90 degrees / 225mm -Cutting capacity / Square at 90 degrees / 180x180mm Bdedsz R Dt Sspfx Abusi -Cutting capacity / Flat at 90 degrees / 265x120mm -Saw blade dimensions 2450x27x0.9mm -2 cutting speeds / 37.5 & 75 / meters/minute -Infinitely adjustable cutting pressure -Coolant system -Miter cutting device -Quick clamping device / Material clamping -Emergency stop -Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.6 meters / Weight 230kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 600 mm, cutting width (max.): 510 mm, control type: CNC control, Equipment: documentation/manual, lighting, BT65 touchscreen control panel Motorized duplex brushing system 5.5 kW drive motor Centralized lubrication system Deviation control Operator platform (work surface height -150 mm) 600 mm 1,270 mm 510 mm Bdods Adufwjpfx Abuei 10 to 110 m/min Ball screw CNC measuring device, cutting width 5 to 510 mm Linear laser Spraying gun Chip conveyor (scrapers), height 1,200 mm Stainless steel collection tray with grating Electrical cabinet air conditioning Hydraulic oil heater Electrical cabinet pre-heating with thermostat Light column Lubricant flow control