Used Italy for sale (1,361)

Condition: excellent (used), power: 20 kW (27.19 HP), fuel type: electric, color: other, lifting height: 11,000 mm, mast type: telescopic, Year of construction: 2024, operating hours: 66 h, Year of manufacture: 2024 Drive: Wheel Empty weight: 19.800 kg Dimensions (LxBxH): 540 x 207 x 200 cm Lifting capacity: 16.000 kg CE mark: yes Gedpfxjw I Hrbe Af Teua Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Work lamp(s) = Remarks = General Country of production: Italy Condition CE type: CE Remote control, Manual Jib

Condition: new, power: 15 kW (20.39 HP), fuel type: hybrid, color: other, Year of construction: 2025, operating hours: 11 h, General information Year of manufacture: 2025 Drivetrain Type of fuel: Hybrid (electric and diesel) Drive: Wheel Engine type: Yanmar 4TNV88 Measures and weights Empty weight: 10.710 kg Dimensions (LxBxH): 396 x 185 x 197 cm Functional Lifting capacity: 10.000 kg CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Non marking tires - Work lamp(s) = Remarks = Godpfxsw D R Ume Af Teua Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: Italy Condition CE type: CE

Condition: new, Year of construction: 2023, operating hours: 3 h, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, power: 16 kW (21.75 HP), total height: 2,220 mm, total length: 2,550 mm, total width: 1,200 mm, color: other, Year of manufacture: 2023 Empty weight: 5.743 kg Lifting capacity: 2.500 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Freelift - Non marking tires - Side shift Gedpfx Aewlzb Tjf Tsua = Remarks = General Country of production: Italy Condition CE type: CE Enclosed cabin, Hoppecke battery 700 AH with charger, Non marking tyres, 4th hydraulic valve, Bluespot

Condition: good (used), Code: 0350 Brand: FINI Model: KSC 5 - CE Standard Screw air compressor with dryer - CE Standard Compressor FINI KSC 5 CE Standard Motor 5,5 Hp Pressure 10 bar Rotational speed 1450 rpm Air flow 450 lt/min Tank capacity 270 lt Gusdpfx Ajyztrvsf Tea Compressed air dryer HITEMA EDR 2.6 - CE Standard Flow rate 36 mc/h - 600 lt/min Rated power 0,19 Kw Volt 220 Overall dimensions: Compressor mm 1350 x 600 x 1200 h - 168 kg Dryer mm 350 x 450 x 770 h - 33 kg

Year of construction: 1998, condition: not inspected (used), functionality: unexamined, workpiece length (max.): 4,200 mm, workpiece width (max.): 2,200 mm, stack height: 1,000 mm, TECHNICAL DETAILS Max. panel length: 4,200 mm Max. panel width: 2,200 mm Max. stack height from floor: 1,000 mm Lifting capacity: 200 kg Number of vacuum suction cups: 32 Godoyzy Rxjpfx Af Toua MACHINE DETAILS Number of pick-up stations: 2 EQUIPMENT Pick-up station for panel stacks Vacuum system Feeding of panel stacks Feeding of panel stacks via motorized roller conveyor Frame system Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved') based on photographic documentation and technical/commercial data sheets of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 5934

Condition: used, Year of construction: 2012, Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Guedpfxswuyzwj Af Tea Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: good (used), Year of construction: 2015, FOR SALE: 4-Axis Palletized Horizontal Machining Center – MCM TANK 1300 MP4 Description: Offering a CNC horizontal machining center from the Italian manufacturer MCM S.p.A., model TANK 1300. This is a high-performance, extremely rigid, and precise machine designed for intensive machining of complex components, ideally suited for the aerospace, energy, and general engineering sectors. Technical Specifications (Manufacturer Source): Brand: MCM S.p.A. (Vigolzone, Italy) Gedpfx Afeyr Hdfs Tsua Model: TANK 1300 (Type MP4) Year of Manufacture: 2015 Axes: 4 axes (X, Y, Z + continuous rotary B-axis on table) Compliance: CE marked Working Capacities: Travel (X / Y / Z): 1,300 mm x 1,300 mm x 1,300 mm (Generous machining envelope) Pallet Dimensions: 800 x 800 mm or 1,000 x 1,000 mm Pallet System: MP4 configuration (4-position multi-pallet) for increased production autonomy Spindle Speed: Up to 10,000 rpm (depending on motorization, with high-speed options available) Spindle Taper: HSK-A100 or ISO 50 (high rigidity) Tool Magazine: Large capacity (standard 80 to 199 tools, expandable) Key Features: "T"-Shape Design: Ensures constant thermal and geometric stability for micron-level accuracy Productivity: Pallet system allows for loading/unloading parts in masked time, ensuring maximum machine utilization Condition: 2015 machine, maintained in a modern industrial environment.

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, parking heater, STANDARD FEATURES ? Reclining backrest ? With handle in the central aisle OPTIONAL FEATURES ? 3-point seat belt for each seat ? Adjustable center armrest with upholstery ? Fabric upholstery SEATS ? Adjustable Lineo passenger seats ? Seat color: Laura 23245105 3017/PM5006065058 ? Headrest: Valencia 107-4001 ? Mushroom base: PN5006062772 DOORS ? Door opener on the left of the dashboard ? Door 2, external opening 800 mm, single-leaf ? 4 red “Emergency” buttons BODY ? Water-repellent plywood floor edge cut-outs Paintwork & Decoration ? Enhanced corrosion protection for underbody Paint color ? RAL 9010 Exterior equipment ? Mud flaps on all axles Flooring ? Sealed joints of flooring under body molding Handrails/Partitions ? Partition wall coated with cement fiberboard ? Divider pipes (epoxy coating) RAL 7004 Window blinds ? Prepared for blinds on side windows Luggage racks ? Interior parcel shelf Flooring ? FL021 Gayawood 4521 Yellowstone Radio ? Dual-zone radio AM/FM/DAB+, USB and SD card slot DIN Microphone ? 1 microphone for the driver and 1 for the hostess OPTIONAL ? 13-pin trailer socket HEADLIGHTS ? Fog lights ? Xenon warning lights with door opening assistant STOP REQUEST ? STOP REQUEST WITH LIGHT AND BELL CONNECTION WINDOWS ? All doors single glazed ? Rear window single glazed ? Windscreen with standard defroster ? All windows non-opening ? Double glazing ? Emergency shut-off switch with chain ? Driver’s window double glazed VENTILATION ? 2 manual roof hatches HEATING ? Reinforced convectors for passenger compartment ? DEL EXTRA WATER TANK FOR HEATING ? SPHEROS HEATER WITH PRE-HEATED NOZZLE AND REINFORCED WATER PUMP AIR CONDITIONING ? Air conditioning + auxiliary heating 32 kW DRIVER’S CAB ? Reversing camera ? ADDITIONAL SUN VISOR FOR LEFT EXTERIOR MIRROR DRIVER’S SEAT ? STANDARD DRIVER'S SEAT WITH INTEGRATED HEADREST – TOP SPEC ? Armrests left and right on driver’s seat DRIVER’S AREA ? Electric front curtain and manual side curtain ? Clothes hooks for driver and co-driver ? Air conditioning for the driver Gedpfx Afexxw Tpe Tsua LUGGAGE COMPARTMENT ? Luggage compartment with door ? Heated driver’s seat DRIVER’S COCKPIT ? Digital tachograph Dtco 4.1 Smart HOSTESS ? Tiltable hostess seat ENGINE ? 2500 RPM ? Engine power 320 HP / 235 kW ? Speed limiter 100 km/h ? Diesel filter heating for Webasto ? FUEL TYPE: Diesel + HVO AUTOMATIC TRANSMISSION ? AUTOMATIC TRANSMISSION ZF 6AP1220B ? KEY PAD FOR AUTOMATIC TRANSMISSION LEFT OF DRIVER OUTSIDE THE DRIVER’S POSITION – 6 BUTTONS REAR AXLE ? REAR AXLE RATIO 5.63 SUSPENSION ? Shock absorbers ? Air suspension ? Lowering function BRAKING SYSTEM ? INTERCITY BRAKE PADS TYPE ? FAE ITALY FUEL TANK ? FUEL CAP & KEY ? Fuel tank capacity 430 l (310 l + 120 l) WHEELS AND TIRES ? Standard on-board tool kit ? Spare wheel carrier with spare wheel WHEEL NUT COVERS / RIM COVERS ? Wheel nut covers front TIRES ? TIRES 295/80R22.5 – FAST ON ROAD/SNOW 152/148 ? X MULTIWAY 3D XZE + XDW ICE GRIP

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Guedpfxjyrgcbs Af Toa Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700

Condition: used, Manufacturer: DMG Gildemaster Country of Origin: Italy CNC Control: FANUC 16i-TB with 7 axes CE Declaration of Conformity Technical Data - Number of axes: 7 - Number of spindles: 2 Travel distances: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Gujdpfx Afeygl N Ns Tea Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: Tool drive power: 1.1 kW Max. speed: 6,000 rpm IEMCA SMART 316 bar feeder Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 mm Machine weight: approx. 2,200 kg Main spindle and counter spindle with new bearings!

Year of construction: 2007, condition: not inspected (used), functionality: unexamined, total length: 5,700 mm, total width: 1,000 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 800 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 800 mm Minimum panel length: 140 mm Maximum panel length: 2,000 mm Conveyor length: 5,700 mm MACHINE DETAILS Dimensions (L x W): 5,700 x 1,000 mm Return of parts to edge banding machine: Left Panel outfeed: via air cushion table Guedoyzzhxjpfx Af Tja Panel feed: via motorized conveyor belt EQUIPMENT CE Safety Standard The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6200

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Gsdeyzy T Tjpfx Af Toua Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 45 m/min, Equipment: CE marking, The machine has the following configuration: Drilling units: Upper unit with 30 vertical and 6 horizontal spindles Milling unit 1: Upper unit, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper unit, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, mounted at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm X-axis traversal speed: 40 m/min Y-axis traversal speed: 45 m/min Z-axis traversal speed: 22.5 m/min MACHINE DETAILS Gedjyzy S Njpfx Af Tsua Control system: WINDOWS Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with vacuum rail supports Number of vacuum rails: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 30 m/min, controller model: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cut-off saw unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile trimming unit Manufacturer model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Scraper blade unit Manufacturer model: 08.519 Unit: Glue scraper unit Manufacturer model: 08.521 Unit: Brushing unit Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm Gjdpeyzy Iwsfx Af Teua TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for coil material Tank for hot-melt adhesive Edge pressure roller unit Pressure by rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Condition: used, Surface grinding machine ROSA LE10 stroke 1000x400mm Wheel-table distance 600mm Grinding Wheel dia. 400mm Magnet table Guedsyzyx Nepfx Af Tea The machine is visible under power in our warehouse in Gussago BS.

Condition: used, Year of construction: 2004, ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece. Gjdpfx Aeyzt T Tof Toua The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material. Power (Ton): 30 Number of rollers: 2 PLC: YES

Condition: excellent (used), Year of construction: 2019, operating hours: 460 h, functionality: fully functional, machine/vehicle number: 283-307, input voltage: 400 V, compressed air connection: 8 bar, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), Fully automated 5 colours textile screen printing machine with 12 stations (Made in Germany), with 5 x Flash Cure Dryer from Chiossi e Cavazzuti Spot Easy, made in Italy. Drying Tunnel, made in UK. Original Equipment Cost €59,750. Excellent programmes allowing multiple options. Example you require a double hit print, programme alloes print 1st colour at first station, move to drying station then send back to first station for second hit of first colour image. and so on. Machine only used 20% of time, so in really good condition. Support available from Manufacturer Heinz Walz. 1. Full set of Aluminium Pallets for bags supplied with machine. 2. Pallets for Clothing available from Heinz Walz 3. With electrically driven squeegees, with fine adjustment. Print size 480 x 500 mm 4. With electrically driven rotation and pneumatically driven lifting system. 5. Digital microprocessor PLC controller with Membrane key pad and 5,7” display control panel in different languages. Standard equipment * Digital microprocessor PLC controller * Membrane key pad and 5,7” display control panel in different languages * Printing in automatic modus or through a foot pedal, one impulse, one print. * Pneumatic screen clamping system Guodpfoyk Du Sjx Af Toa * Control membrane keypad on each printing station * Dual air cylinders squeegee system * Frontal screen loading * Indexing table servo driven * Lift system pneumatically driven * Squeegee electrically driven * Squeegee pressure individually adjustable * Four different printing programs + one flock program. * ½ index and double index * Clock wise or anti clock wise rotation * Off contact of the screens individually adjustable * Registration: ± 0,025 mm

Condition: used, Hwacheon mod Sirius III - 1250 Table 1400 * 700 Gusdpfx Afjyzpquo Tsa X 1100 mm Y 700 Z 650 Cambio utensili / Toolchanger 30 pos ISO 50 8000 RPM max 30kW CNC Fanuc 18iMB Still under power on the shop floor

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 22675, type of input current: three-phase, input voltage: 400 V, disc diameter: 300 mm, rotational speed (max.): 3,600 rpm, rotational speed (min.): 600 rpm, overall weight: 410 kg, spindle diameter: 25 mm, wheel diameter: 300 mm, wheel width: 50 mm, Equipment: double-sided, rotational speed infinitely variable, ✨ 2016 Ciclope DBC 400/2-MV Double Ended Polishing Machine – For Sale in Ireland (Very Good Condition) Enhance your metal finishing capabilities with this high-quality Ciclope DBC 400/2-MV Double Ended Polishing Machine, manufactured in 2016 and currently available in very good condition. Built in Italy, Ciclope machines are trusted by professionals across the metal fabrication and surface finishing industries for their durability, precision, and powerful performance. This robust double-ended polishing system is ideal for stainless steel, aluminium, brass, and other metal components. Whether you're polishing flat parts, round tubes, or intricate shapes, the DBC 400/2-MV delivers consistent, high-speed results with minimal vibration and excellent control. ✅ Key Features – Ciclope DBC 400/2-MV (2016) Year of Manufacture: 2016 Condition: Very Good – Fully operational Type: Double-ended polishing machine Motor Power: 2 x 3 kW (per side) Polishing Wheel Diameter: 300 mm Polishing Wheel Width: 50 mm Spindle Diameter: 25mm Spindle Length: 110mm Spindle Speeds: 600 to 3600rpm Spindle Speed: Variable (MV = motovariator model for adjustable speed) Electrical Connection: 3ph/400V/50Hz Machine Weight: 410kg Workpiece Compatibility: Flat and round components, small to medium size Construction: Heavy-duty cast iron base for stability Integrated Tool Rests and Safety Guards Brake: Electronic Brakes and Stop Pedals Electrical Controls: 24V CE certified, user-friendly panel 🧰 Machine Applications High-speed surface finishing of stainless steel and non-ferrous metals Pre-polishing, mirror polishing, or deburring Ideal for fabrication shops, decorative finishing, and precision engineering Dual-head configuration increases throughput and flexibility 📦 Included in Sale Ciclope DBC 400/2-MV polishing unit 2 x polishing spindles with guards Adjustable tool rests Guedpfxewqrlte Af Tea Control cabinet and safety system Ready for use in workshop or production line 📍 Available Now in Ireland Located in Ireland, this machine is in stock and available for immediate inspection and delivery. We provide nationwide shipping, with options for UK and European delivery upon request. 📞 Enquire Now Don’t miss this opportunity to own a premium Italian-made polishing machine in excellent working condition. Perfect for professionals who demand reliability and a high-quality finish. Ciclope DBC 400/2-MV for sale in Ireland Double ended polishing machine used Industrial metal polishing machine Ireland Surface finishing equipment for stainless steel Polishing machine with variable speed control Used Ciclope metal polishing machine Heavy-duty polishing grinder for aluminium and brass Mirror finish polishing machine Ireland / UK / Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Gujdpfx Afoywztgo Toa Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,895 kg, maximum load weight: 605 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 aluminum flatbed with loading crane available immediately; the vehicle is available for rental with a purchase option. Chassis: Fuso 3S15 Canter - GVW 3,500 kg; payload of finished vehicle with loading crane and aluminum flatbed approx. 600 kg - Manual transmission - Limited-slip differential - Batteries: 2 x 100 AH - Towbar with ball head, 3,500 kg incl. factory-fitted electrics - Heated exterior mirrors - Automatic climate control - Radio pre-wiring - Reversing warning system - PTO with rpm increase - Battery cover and AdBlue tank cover - Prepared for battery cut-off relay - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: - Internal: 2,720 mm x W 1,820 mm x H 400 mm Gedpfxsywzygj Af Tjua - 18 mm floor panel - Floor frame with airline rails all around - Airline rail in the bulkhead - Drop sides aluminum anodized with folding step, easily removable - Storage box - Work lights - Other flatbed sizes available Loading crane: with 3 hydraulic extensions (Country of manufacture: Italy) - Lifting capacity (per manufacturer): max. 995 kg; 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - Design according to CE Directive (EN 12999) - Slewing range 370° (slewing range limited 190°) - All hydraulic cylinders double-acting - Pistons rods hard-chromed - Pressure relief and load-holding valves - Emergency stop - Control block with 5 spool valves - Separate hydraulic tank (33 l) with filter, mounted on crane base - Outriggers extendable on both sides, special supports, support width 3.10 m - Hydraulic outriggers swiveling 30° and 180° – CE, incl. M.O.L. - Load hook and fastening brackets - On-board power supply: 12V - Electric modules for Danfoss S800 control block, 4 functions - Danfoss S800 control block, 5 functions incl. high-pressure filter - Special supports, support width 3.10 m, quantity: 1 piece - Surcharge for shortened support legs by 80 mm - Mechanical jib extension N, lift 1.30 m (7.0 k - Stainless steel bolts and stainless steel pipe clamps - Dinitrol treatment (cavity protection) - Zinc primer - Switch for work lights near control block, factory-mounted - LED work lights on knuckle arm, factory-fitted - LED for 2 support legs - Options: Reversing camera with CarPlay, spade holder, 90° rope, ladder rack/transport frame bulkhead or rear wall, additional storage box available. Errors and prior sale excepted. ... Air conditioning, climate control, VAT deductible, ASR, ABS, on-board computer, front power windows, electric immobilizer, central locking with remote, tow bar, power steering, locking differential, spare wheel, twin tires, cab: short distance, electric windows, work lights, crane, new condition, emission class Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, for rent, low emission sticker: 4 - green, reversing camera.

Condition: excellent (used), fuel type: electric, color: other, lifting height: 11,100 mm, Year of construction: 2023, operating hours: 531 h, General information Year of manufacture: 2023 Technical information Drive: Track Gujdpfow A S E Dex Af Toa Empty weight: 2.400 kg Dimensions (LxBxH): 299 x 73 x 160 cm Functional Length of jib: 10,4 m Lifting capacity: 2.800 kg Supply voltage: 48 V CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Lifting hooks = Remarks = General Country of production: Italy Condition CE type: CE Radio remote control, Winch with double pulley hookblock and ball hookblock, 1000 kg Hand Jib, Extending undercarriage

Condition: excellent (used), fuel type: electric, color: other, lifting height: 7,500 mm, Year of construction: 2013, operating hours: 225 h, Year of manufacture: 2013 Drive: Wheel Gedpjw D Shbsfx Af Tsua Empty weight: 4.990 kg Dimensions (LxBxH): 315 x 155 x 185 cm Lifting capacity: 4.500 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Lifting hooks = Remarks = General Country of production: Italy Condition CE type: CE

Condition: excellent (used), Catalogue number 6462 TECHNICAL DATA - 2.2kW motor - 380V power supply - Head traverse motor 0.9kW - Extraction port diameter 2x100mm - Dimensions (L/W/H): 1330x1100x1220mm - Weight: 920kg Machine equipped with: Guodpfjyyyk Nsx Af Tja – 2 tables with angle stops, size 385x330mm – 2 pneumatic clamps – Tables angle-adjustable in two planes – Capability for machining longitudinal and round tenons on the tables – Height-adjustable tables – Tenon width adjustment – Central lubrication – Unpainted – Made in Italy – Used tenoning machine, very good condition Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7818 Technical data: - Max. working width: 1100mm - Max. working height: 180mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit - Metal pressure roller - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar Gsdpfx Afsyyygde Teua - Extraction port diameter: 2x155mm - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)