Used Lab Extruder for sale (2,002)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Knedjznkx Dspfx Aqqea Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), functionality: fully functional, - Haendle Screen mixer MDSG 1015a, Volume throughput: 22-56 m³/h, Throughput capacity: 39-99 t/h wet; - Rieter extruder type SP 560/500 with double-shaft mixer type VDWM2107. Diameter 560x500, capacity 25 m3/h, 30 bar; - Rieter extruder type SP 500/500 with double-shaft mixer type VWM3. Screw diameter 500, capacity 20 m3/h; - Rieter Extruder OPTIMAT 600-560, capacity 32 m3/h, 25 bar; Knodpfx Aoyk Rwaoqqsa - Rieter Extruder type SP 650-600, capacity 65 t/h; - Rieter extruder type UR4, capacity 35 t/h; - Haendle extruder type PZG 56a/50 with mixer type MDVG920, capacity max. up to 30 m3/h, 30 bar; - Haendle extruder type PZG 56a/40 with mixer type MDVG715, capacity 19 m3/h; - Haendle Extruder type PZG60b56 with mixer type MDVG920b, capacity 32 m3/h, 24 bar; - Haendle Extruder type PZG60b50 with mixer MDVG920a, capacity 29 m3/h, 30 bar; - Petersen extruder VAP 65, 650x560, 2008. Capacity approx. 60 t/h, maximum pressure 55 bar; - Breitenbach Extruder type VAP50 with double-shaft mixer, capacity 40 t/h; - Ishikawa extruder type E-45S, Y-1 with mixer Takasago, capacity 25-30 t/h. - Double-shaft mixer by Haendle type MDVG 715, 915, 920a, 1025; - Planetary mixer by O.M.G. Officine Meccaniche Galletti type P 500

Condition: used, functionality: fully functional, Haendle wet pan mill HMS2080b, Haendle Siebrundbeschicker BRSH19, Haendle Extruder PZVA 60a/50 Knedsy U Ighspfx Aqqja

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Knjdpfoi Dtbusx Aqqoa Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer Knjdpfoi Dtbqsx Aqqja > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Knedsq R Tkwjpfx Aqqja Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned. Knsdpfx Aewxvadjqqoa

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. Kjdpfx Aoiv H Ekoqqjna We can also provide machines in other dimensions.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. Knodpfxjby Rfpo Aqqsa We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Knjdpjyc Sfpsfx Aqqsa Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 7 / 8939 / 05 / 21, Used Reifenhäuser extruder Type: RH-241-1-50-30 WE DC-motor with 37 kW capacity screw dimensions : diameter 50 mm – 30 L/D Grooved feeding zone With manual screen changer Fully functional You are welcome for inspection this (and further) extruders in our warehouse Königswinter Kjdpfxsw Np Tks Aqqona The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 2004, condition: excellent (used), Twin-screw extruder Rollepaal T-REX 2-90-30 Ksdpfxexcp T No Aqqena Application PVC PIPE The extruder is in very good condition and ready for operation. Location: Germany:D-26345 Bockhorn-Grabstede, Bahnhofstr 6 The extruder is my property

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Kjdpeyrihgofx Aqqsna Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Knodpfx Aqoyx Dw Djqea Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, Manufacturer: Erweka Model: AS400 Type: Laboratory rotary mixer Coupling allows quick and easy attachment of different devices. Kedpfox R Dl Esx Aqqjna Available tools: Mixer cube (different volumes: 20, 12, 18, 7 and 3 liters) Materials in contact with product: stainless steel Variable speed  

Condition: used, Year of construction: 2009, Manufacturer: Romaco - Frymakoruma Model: Dinex Lab Year: 2009 Type: Vacuum mixer for R&D or small-scale production Application: liquid and/or viscous (semi-liquid) products = dispersion, homogenization, emulsion, grinding, and pumping of the product Tank: Pressure: -1 / 0 bar Volume: 18 L Temperature: 130°C Jacket: Pressure: 6 bar Volume: 2 L Temperature: 180°C Homogenizer: high-speed agitation 2 modes = Pumping with discharge / Dispersion with high shear force Tool size: 100 mm Rotor: 20 x 4 mm Stator: 30 x 4 mm VEM motor 7.5 kW / 2890 RPM Scraper mixer: slow agitation SEW 0.37 KW motor Sterling SIHI LEMA 25 liquid ring vacuum pump Power 1.1 KW - Max. 16 m³/h. CIP (clean in place) 2 x feed hoppers, 1 of which is connected to the jacket with its piping Air pressure: 6 bar Water pressure: 6 bar Temperature control regulator Single-acting seal: reconditioned by Burgmann Knedpex R D Eljfx Aqqoa Paper documentation Weight: 750 kg

Year of construction: 2026, condition: new, extruder 30 mm with die-face pelletizer, the housing, made from stainless steel, is swivelling. the lenght of the granules is adjustable by means of the cutting speed. optionally, we offer a transport belt for cooling the granules. Kodef Uc Ugspfx Aqqsna

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Knodpfxjzc I Igs Aqqea Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Year of construction: 2025, operating hours: 2,000 h, condition: like new (used), Complete, as-new Subitec LS180 photobioreactor lab system, built and commissioned in 2025 (07/2025), used only in a controlled laboratory environment. A ready-to-run, turn-key platform for microalgae cultivation and process development — not a bare reactor frame, but a full working package: reactor, high-power lighting, gas management, cooling and a modern B&R automation system with touchscreen and secure remote access, all in one compact unit. At its core is a 180 L Flat-Panel Airlift (FPA) reactor in transparent PVC. Internal static mixers and downcomer geometry create gentle, continuous circulation between lit and shaded zones for optimal growth — without any mechanical stirring. Highlights: Superior, proven performance: in-house cultivation has reached growth rates above 5 g/L/day and densities up to 14 g/L with Chlorella vulgaris. Powerful lighting, high-efficiency light path: double-sided dimmable LED (~4,080 W, full 400-780 nm spectrum), ideal for high-density cultivation and for studying versatile light regimes. Easy to run and keep clean: low-shear airlift circulation, transparent panel with no gradual film build-up, intuitive touchscreen operation. Compact footprint vs. bulky tubular systems (approx. 2.6 x 0.8 x 3.2 m). Tailor-made beyond the standard Subitec design: automatic CO2 dosing via a Bürkert control valve and real-time concentration measurement of the outgoing (off-gas) CO2 for carbon-uptake monitoring. Data-ready automation: all key process variables (pH, temperature, CO2 dosing and off-gas uptake) continuously logged on an open B&R platform. Technical data: Reactor: Flat-Panel Airlift (FPA), 180 L, transparent PVC; aluminium frame Dimensions (L x W x H): approx. 2.6 x 0.8 x 3.2 m Year built / commissioned: 2025 / 07/2025 — as-new Knjdpfx Aqozluymsqea Temperature range: 5-30 °C; noise < 70 dB(A) Lighting: LED, double-sided, ~4,080 W, 400-780 nm, max. 500 µmol/m²/s per panel, dimmable Automation: B&R X20 PLC (X20CP1685 / X20EM1612), 4 GB eMMC, Profinet, full I/O set HMI: B&R Power Panel T80 12.1" touchscreen Remote access: Tosibox Lock 670 secure router CO2 dosing: Bürkert 8741 mass flow controller (0-10 Nl/min, Modbus TCP), pH-based PID control CO2 off-gas: Norsk Analyse GD10P NDIR analyser (0-100 vol-%, CH4-immune) Cooling: two reactor-integrated heat exchangers + dedicated chiller Control cabinet: Rittal (800 x 1200 x 300 mm); Hager main switch, 3-phase RCD & breakers Supply: 3 x 230 VAC / N / PE, 16 A; 24 VDC control Scope of delivery (single working package): 180 L FPA reactor in aluminium frame; double-sided dimmable LED lighting; gas-mixing unit and filtered (0.2 µm) gas supply; Bürkert CO2 mass flow controller; Norsk Analyse off-gas analyser; chiller and integrated cooling; periphery (media/harvest lines, filters, sampling unit); exhaust unit (foam trap + air lock); Rittal cabinet with B&R automation and 12" touchscreen; Tosibox remote access; temperature and pH sensors. Support: operator training included (remote, or on-site by agreement). We can also advise on the best use of Chlorella strains, recommend species that perform well in this reactor, and share relevant cultivation data. Location: Lahti, Finland — viewing by appointment. Price and delivery terms by agreement.

Condition: good (used), Control panel Application: Lisec LBH-25 butyl extruder Ksdpjyyaunefx Aqqjna Width: 570 mm Height: 255 mm Depth: 100 mm Weight: 2800 g Condition: Good, second-hand

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Kedpfx Ajyztagjqqsna Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table Knodpfxexw Tume Aqqea For further information, please inquire. Price on request.

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed Kodpfxsiiypps Aqqona massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Knjdpfx Aqszhnlujqea

Year of construction: 2017, condition: good (used), Used Xtrutech extruder XTS 24 available. The extruder is fully operational and was used in powder coating applications, supplied with many spare parts. We can offer the extruder with Brabender dosing and a cooling belt. Ksdsvcynujpfx Aqqena