Used Leveler for sale (5,920)

Condition: used, Weiss   Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled   Item description:   For sale is a Weiss Technik TS 60 thermal shock test chamber. The chamber is ideally suited for rapid temperature cycling tests Lhsdpjzii A Rsfx Ah Sjn (e.g., according to IEC, MIL-STD, JEDEC) and has been well maintained.   Volume & Internal Dimensions:   Test volume: 60 liters   Internal dimensions of basket / test chamber (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm   Temperature ranges & cycling   Hot chamber +50 °C to +220 °C Cold chamber −72 °C to +70 °C   Transfer time (basket between both zones): < 10 seconds   Heating rate / heating speed up to 17 °C/min Cooling rate / cooling speed up to 3.7 °C/min   In single mode (cold zone only), heating rate: approx. 3.2 °C/min   Temperature deviation & homogeneity   Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C   Load / payload & lifting system   Basket / lifting system load: 20 kg maximum load capacity Transfer basket secured by protective grilles on all sides   Other features & equipment   Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces   Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Fuse on customer's side 32 A Refrigerant R-404A / R-23   Weight: 800 kg   For your safety as a buyer, please note the following:   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber, EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) cooling incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Special added value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) Performing aging tests on lithium-ion cells Performance tests (charge/discharge cycles at varying temperatures) Temperature endurance tests and temperature change tests Tests of unpowered and cyclically powered cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & audible alarm Mechanical double-door locking system (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inertization (e.g., nitrogen) Emergency stop / manual triggering of the extinguishing system Feedthrough openings for charging and measuring cables Ledpfxszizr Rs Ah Sjhn Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without resulting in an explosion or uncontrolled propagation. Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and failure scenarios. Technical key data: Temperature range: -10 °C to +100 °C Interior volume: approx. 698 liters Inserts: 4 x stainless steel Max. load per insert: 45 kg Max. total load: 100 kg Electrical data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: WT3-1000/40 Weiss temperature testing cabinet with S!MCON / 32 control, water-cooled Control panel: "Touch Panel" All control and operating commands can be initiated on the "Touch Panel" control panel by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing cabinet is equipped with adjustable feet. Feedthroughs The testing cabinet is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the testing chamber. Feedthroughs installed as standard R1: 125 mm L1: 50 mm Testing chamber volume: approx. 990 liters Testing chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 4500 W Data for operation: Testing chamber lighting: Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A, Rated power 11.5 kW Fuse, to be provided by the customer: 32 A, slow-blow Sound pressure level approx. measured at a distance of 1 m from the front, 1 m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components Lhodpfx Ahezgbt Nj Ssn 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Vötsch Type: VLM 3068/S Vötsch Temperature Test Chamber VLM 3068/S, Air-Cooled (Top-loading test chambers for construction materials) Control Panel The control panel is mounted on a console on the temperature test chamber. All control and operating commands can be activated by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Handling Unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air deflectors on the long sides. Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front 2 x 82 mm diameter, at the rear 1 x 85 mm diameter. Internal Dimensions: Width 2000 mm, Depth 570 mm, Height 600 mm External Dimensions: Width 3000 mm, Depth 870 mm, Height 1060 mm Technical Data: Data for Mechanical Load: Max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for Temperature Tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the useful space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for Operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Fuse on customer side 16A slow-blow Temperature Test Chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Lhjdpfezgbmiox Ah Sen Noise measurement Sound pressure level approx. 68 dB(A) Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 350 mm z-travel 400 mm table surface area 820 x 420 mm Maximum weight on the table 300 kg milling head -swivable +/- 90 ° Speed range - 2 levels 0 - 4.500 U/min Ledpfx Aoz St Nrsh Sshn feed speeds 0 - 2.000 mm/min rapid traverse 5.000 m/min total power requirement 7 kW weight of the machine ca. 1,65 t dimensions of the machine ca. 2,25 x 1,9 x 2 m

Condition: new, machine/vehicle number: 2642110, fuel type: diesel, motor manufacturer: Volvo TAD882GE-SV, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 3.840 kg Functional Generator capacity: 275 kVA Dimensions of cargo space: 424 x 120 x 230 cm CE mark: yes Other information Fuel consumption: 39.5 Liter per hour at 75% Load Generator: Stamford UCDI274K1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1800 l Lhjdpfsxbwxqjx Ah Ssn Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames Stage V Generator Stage V Aggregaat Stage 5 Generator Stage 5 Genset Stage V Gen set Stage V Generator set EU Stage V Generator StageV

Condition: new, machine/vehicle number: TPT00107, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Cat C18, General information Year of manufacture: 2026 Field of application: Construction Lhsdpfxexuzu Ao Ah Sen Weights Empty weight: 7.885 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 542 x 204 x 243 cm CE mark: yes Other information Fuel consumption: 126.3 Liter / Hour at 100% load Generator: Cat LC6100 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1125 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, machine/vehicle number: XPD00285, fuel type: diesel, motor manufacturer: Cat C9.3B, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 4.784 kg Functional Generator capacity: 310 kVA Dimensions of cargo space: 409 x 151 x 228 cm CE mark: yes Other information Fuel consumption: 62.6 Liter / hour at 100 % Load Generator: Cat LC5114N Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Production country: CN Additional information Lodozc Dwqepfx Ah Sjhn Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames - Noise Rating: 65 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 3.701 kg Functional Generator capacity: 125 kVA Dimensions of cargo space: 225 x 135 x 225 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = Lhsdpjw A E U Sofx Ah Son - Control Panel - Tank

Condition: new, power: 37 kW (50.31 HP), General information Year of manufacture: 2024 Operating hours: 1 Lhedpfx Ajlvrr Rsh Ssn Technical information Chassis type: articulated Make of engine: Kubota D1803 CR (3 cilinder), Stage V met DOC en Top speed: 25 km/h Functional Lifting capacity: 2.325 kg Dimensions of cargo space: 347 x 130 x 234 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information EPA Marked: yes Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: BKT Emission level: Stage V / Tier IV final Production country: NL Additional information Please contact Robert Vijn for more information = Additional options and accessories = - 3rd hydr. circuit - 4th hydr. Circuit - Additional hydraulics - Attachment bracket angular movement - Auto / hydraulic quick coupler - Battery disconnector - Demolition/FOPS cab guard - Extra counterweight - Forks - Mudguards - Original colour - Rotating beacon - Standard digging bucket

Condition: new, Clean air dust collector AL-KO POWER UNIT 300 P -Exhibition model- Pre-separator integrated, Lsdpfx Ahou R S A Rs Sjhn Fire extinguishing system integrated ----- Technical data ----- Suction nozzle diameter: 300 mm, Nominal air flow rate: 5,089 m³/h, Maximum air flow rate: 6,000 m³/h, Maximum vacuum: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (L x W x H): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, According to: GS - HO - new exhibition machine -

Condition: new, fuel type: diesel, motor manufacturer: Kohler KDI2504TCRCAC-SV, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.500 kg Functional Generator capacity: 50 kVA Dimensions of cargo space: 254 x 114 x 165 cm CE mark: yes Other information Fuel consumption: 8.1 L/Hour at 75% Load Generator: Mecc Alte ECP32-2M/4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 250 l Production country: ES Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel Lhsdpfx Aheynrkcj Sjn - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: used, Liebisch Type: S 1000 A-TR / 42016211 Chamber-type test equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type test equipment of type A-TR. The device's internal control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range humidity S: up to / 70°C Control range test chamber K: up to / 50°C Control range test chamber S: up to / 50°C Frequency: 50/60 Hz Lsdpfx Aezh Ht Rsh Sshn Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Reservoir for test solution: approx. / 150 liters Test solution consumption / hour: approx. / 0.7 – 1.0 liters Water filling, base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We would be happy to answer any further questions you may have over the phone.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant Lhjdpfx Ajy Hkd Hsh Sjn 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss Type: WT-1300/70/15 Weiss temperature testing chamber, water-cooled with touch panel control Data for temperature tests: Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Lodpsza Dv Isfx Ah Sehn Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm, Width: 1100 mm, Depth: 1330 mm External dimensions: Height: approx. 2050 mm, Width: approx. 1300 mm, Depth: approx. 3200 mm Permissible test item weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Data for operation: Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 63 A Rated power: 44 kW Refrigerant: R404A: 14.0 kg R23: 5.4 kg Maximum permissible pressures: R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment: Touch panel control Stainless steel test chamber Multiple insertion levels Side access Heated door seal Water-cooled refrigeration unit CEE connector CE marking available Weight: approx. 1500 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of delivery: (See image) Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Type: TS 130 Weiss Temperature Shock Testing Chamber, Air-Cooled Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover time: 10 seconds Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift basket (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on test chamber floor: max. 20 kg Cooling water pressure: min. 2 … max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Refrigeration cascade: water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Ljdpfozp D A Ejx Ah Sjhn Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg Ljdpfxezg Tpij Ah Sjhn For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Lodpfx Ahozg Tp Ne Sjhn Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Weiss   Type: WT11-1000/70/5   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -70°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Lodpozfy Rwjfx Ah Sshn Cooling 5 K/min   Heat compensation max. 2750 W   Feedthrough installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert grid 50 kg Total load of the grid supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 960 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to "see," allowing it to handle assembly automation and inspection tasks with maximum flexibility. It works in collaboration with humans, sharing the same tasks without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a true plug & play solution. Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See image) Ledpfx Aszg Eyash Sshn (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, mileage: 100 km, number of seats: 1, color: other, Height: 100 cm Damage: none Lsdpfx Aheylhtzs Sehn = Company information = We are an international company based in Belgium, in the Brussels area (+/-20 km,). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and coaches and has an extensive parking lot that serves as a showroom. We always have numerous buses of all makes, capacities, models and price levels in stock. We can find you the right tourist, school or public service bus to suit your needs or budget. All information without guarantee. Errors, prior sale and typing errors excepted. Opening hours for viewing used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00 Mowimy po Polsku Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, machine/vehicle number: U398538, power: 83 kW (112.85 HP), fuel type: diesel, Year of manufacture: 2026 Empty weight: 567 kg Make of engine: Perkins Dimensions of cargo space: 126 x 73 x 96 cm Emission level: Stage IIIA / Tier IV interim RPM: 2200 Production country: UK Lhsdov Tudrepfx Ah Sjn Please contact Team DPX for more information Perkins 1100 Series 1104D-44TA 83.0 kW / 111.3 hp @ 2200 rpm

Condition: new, Compressor AIRCRAFT Airprofi 703/100 – used – Galvanised tank, incl. pressure regulator, Year of manufacture 2018, unused, SPECIAL PRICE instead of promo price 1,699,-- ----- Technical Data ----- Tank capacity: 100 litres, Lhodpfxe Aaz Tmj Ah Sjn Max. air displacement: 650 litres, Max. pressure: 10 bar, Motor: 4 kW, Speed: 950 rpm, Sound pressure level: 93 dB - new demonstration unit -

Condition: excellent (used), mileage: 270,348 km, power: 162 kW (220.26 HP), first registration: 03/2020, fuel type: diesel, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, EBS, USB port, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, tachograph, traction control, = Additional Options and Accessories = - Alarm system - Rear work light - Front work light - Armrest - Audio controls on the steering wheel - AUX input - Outside temperature display - Construction light - Becker holder - Heated mirrors - Leaf spring suspension - DAB radio - Differential lock - Differential lock - Tachometer - Electric mirrors, heated - Additional lighting - Driver's seat height adjustment - Remote central locking - Speed limiter - Tinted glass - Hydraulics - Height-adjustable steering wheel - Height adjustment for driver's seat - Cabin - Folding exterior mirrors - Air conditioning - LED lighting - Air suspension - Center armrest - Multifunction steering wheel - Radio/CD player - Rotating beacon - Reversing camera - Disc brakes - Headlight leveling - Sun visor - Immobilizer - Touchscreen - Winch - Power take-off (PTO) - Power take-off (PTO) = Additional Information = Year of manufacture: 2020 Number of cylinders: 4 Lhedpfx Aoz S Tv Eeh Sen Engine displacement: 4,580 cc Unladen weight: 6,425 kg Technical condition: very good Optical condition: very good Damage: none Price: Upon request = Company Information = Nidro cars Holland is located in the center of the country and is the right place to purchase your car, van, or truck. The stated price is the "internet take-away price." For questions or to arrange a test drive, please contact us: FIND OUR ENTIRE INVENTORY AT All types of trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, total length: 4,000 mm, total width: 2,100 mm, total height: 2,050 mm, Year of manufacture: 2026 Colour: White Empty weight: 4.020 kg - Year: 2026 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Main motor power [kW]: 2.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 400 - Total stroke [mm]: 400 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Assembled panel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Total pressure [Ton]: 70 - Working pressure [kg/cm²]: 2 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Transport dimensions: 4000mm x 2100mm x 2050mm (l x w x h) - Transport weight [kg]: 4020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lodpfxszkr Tbe Ah Sshn Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels