Used Machine Window Protaction for sale (74,697)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been serviced annually (most recently in December 2025); service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Iodpfx Ahjzrnhwo Detk Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 400 mm Travel range Z-axis: 330 mm Rapid traverse speed: 54 m/min Spindle speed: 100–10,000 rpm Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Table area: 650 × 400 mm Table load: 300 kg Tool positions: 21 MACHINE DETAILS Itjdjzul Tcepfx Ah Djk Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Operating hours: 10,294 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of the XYZ axes Parameter backup function Retraction cycle for tapping without a compensating chuck MANUAL GUIDE Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Threading without a compensating chuck M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycle G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Multi-step skip G31 P1–P4 Verification of travel limit before movement Verification of stored travel limit 1 Verification of stored travel limit 2 G22/G23 Customer-specific PMC Real-time customer macro

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 520 mm Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Ijdpfezul R Ijx Ah Detk Internal cooling Machine cover, closed on top / Top cover Oil skimmer Pneumatic clamping system A, 1 pair per pallet Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel ranges Travel range X-axis: 3,048 mm Travel range Y-axis: 813 mm Itodpfx Aoztq Txeh Dok Travel range Z-axis: 762 mm Main spindle Spindle speed: 6,000 rpm EQUIPMENT Coolant system

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Itjdpfx Aozu Nyajh Dok Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate Itedpfx Ahezuw D Ts Dek

Condition: ready for operation (used), functionality: fully functional, grinding wheel diameter: 355 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 750 mm, travel distance Z-axis: 340 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Iedpezuw Dmofx Ah Dotk Travel range, X-axis: 750 mm Travel range, Z-axis: 340 mm Table width: 600 mm Table depth: 300 mm Magnet width: 600 mm Magnet depth: 300 mm Max. grinding wheel diameter: 355 mm Max. spindle speed: 1,500 rpm MACHINE DETAILS Drive system: CNC Control system: Fanuc DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 2,300 x 2,400 mm Net weight: 2,500 kg Shipping packages: 3 units EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 06584, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: Hurco Ultimax, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Axes: 3 Travel in X-axis: 1,020 mm Travel in Y-axis: 510 mm Travel in Z-axis: 610 mm Spindle speed (max.): 8,000 rpm Motor power: 15 kW Table length: 1,220 mm Iedpfx Aozuw A Njh Dstk Table width: 510 mm MACHINE DETAILS Control system: Hurco Ultimax Drive system: CNC Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,350 x 2,400 mm Weight: 5,000 kg Shipping packages: 1 EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 2,000 mm Travel in Y-axis: 500 mm Itsdpfszuw Aijx Ah Djk Travel in Z-axis: 550 mm C-axis rotation: 360° Control system: Siemens CNC Table length: 2,600 mm Table width: 550 mm Tool holder: ISO 40 Main spindle power: 22 kW Spindle speed max.: 12,000 rpm Positioning accuracy: 0.01 mm Travel speed: 667 mm/s MACHINE DETAILS Control system: Siemens CNC Connected power: 24 kW Dimensions & Weight Dimensions (L x W x H): 7,500 x 3,700 x 2,500 mm Empty weight: 9,600 kg Transport packages: 2 EQUIPMENT Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 19142, roller (bottom) diameter: 140 mm, roller (top) diameter: 120 mm, working width: 1,250 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. pre-bending thickness: 4 mm Max. working width: 1,250 mm Number of rollers: 4 pcs. Number of driven rollers: 2 pcs. Diameter of upper roller: 120 mm Diameter of lower rollers: 140 mm MACHINE DETAILS Control system: CNC Drive: Hydraulic Power: 4 kW Dimensions & Weight Unladen weight: 1,450 kg Dimensions (L x W x H): 2,700 x 1,450 x 1,500 mm Transport weight: 1,450 kg Number of transport packages: 1 pc. EQUIPMENT CE marking Itsdpfx Aszuwwajh Djk Documentation

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA1/017825, functionality: fully functional, travel distance X-axis: 5,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, number of slots in tool magazine: 12, TECHNICAL DETAILS Number of controlled axes, milling spindle: 5 Tool holder: HSK-F63 Type of milling table: Cross table Tool changer positions: 12 Working area, X-axis: 5,200 mm Working area, Y-axis: 1,550 mm Working area, Z-axis: 160 mm MACHINE DETAILS System/Software: SCM Maestro Vacuum pump Manufacturer: Becker Type: VTLF 2.250/0-791 Year of manufacture: 2014 Main motor power: 5.5 kW Capacity: 244 m³/h Negative pressure: 200 mbar Overall length: 9,000 mm Overall width: 5,000 mm Overall height: 3,100 mm EQUIPMENT Vacuum pump Becker VTLF 2.250/0-791 Manual control Iodpfszuwt Uox Ah Djtk CNC documentation on USB stick Safety light curtain Safety fence CE certificate Documentation

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 65352, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 170 mm, number of axes: 3, number of slots in tool magazine: 12, TECHNICAL DETAILS Itsdpszuwt Ijfx Ah Dek Milling spindle Number of controlled axes: 3 Tool holder: ISO 30 Motor power: 1.7 kW Drilling unit Drilling tool available: Yes Vertical drilling spindles: 10 pcs. Table and working area Type of milling table: Flat table Table length: 3,750 mm Table width: 1,560 mm Working area X-axis: 3,765 mm Working area Y-axis: 1,585 mm Working area Z-axis: 170 mm Z-axis travel max.: 324 mm Material clamping system: Pneumatic Tool changer and control Number of tool changer positions: 12 pcs. MACHINE DETAILS System/Software: BiesseWorks Vacuum pump Brand: Busch Type: MM1322AVM Capacity: 360 m³/h Connection diameter: 60 mm Oil-free: Yes Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,250 x 2,550 mm Installed length: 6,465 mm Installed width: 4,794 mm Installed height: 2,550 mm Shipping weight: 2,500 kg Shipping packages: 2 pcs. EQUIPMENT Tools included Vacuum pump Busch MM1322AVM Safety mat CE marking

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 72122, functionality: fully functional, working width: 900 mm, number of spindles: 17, spindle speed (max.): 24,000 rpm, working height: 70 mm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 900 mm Working area, Z-axis: 70 mm Itjdpfx Aszulv Djh Dsk Milling unit Number of milling spindles: 1 Tool holder interface: ISO 30 Spindle speed range: 12,000 – 24,000 rpm Spindle speed control: stepless Drilling unit Number of horizontal drilling spindles: 6 Number of vertical drilling spindles: 10 Sawing unit Manual operation MACHINE DETAILS Power of main motor: 4 kW Connected power: 12 kW Voltage: 400 V Current consumption: 22 A Fuse rating: 32 A Dimensions & Weight Transport dimensions (L × W × H): 2,000 × 2,600 × 2,700 mm Transport weight: 1,500 kg Number of transport packages: 1 EQUIPMENT CE marking

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 612332V00006, Year of construction: 2019, operating hours: 8,893 h, load capacity: 1,000 kg, lifting height: 4,780 mm, free lift: 1,850 mm, fuel type: electric, mast type: duplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting height: 4,780 mm Lifting capacity: 1,000 kg Free lift: 1,850 mm Overhead clearance: 2,930 mm Fork length: 1,190 mm Fork width min.: 300 mm Fork width max.: 680 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Battery type: 4 PzS 620 Battery year of manufacture: 2019 Battery capacity: 620 Ah Battery voltage: 48 V Itodpfozulkuex Ah Dsk Operating hours: 8,893 h Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,680 x 2,920 mm Unladen weight: 6,225 kg EQUIPMENT Free lift Non-marking tires Semi-cabin Height indicator User manual available CE marking

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Itjdpfxszu Akro Ah Dsk Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° Iedpfxjzu Avzj Ah Djtk L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Ijdpfszuzpaox Ah Dotk Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: not inspected (used), machine/vehicle number: AAC3021001514, No minimum price – guaranteed sale to the highest bidder! For sale is a digital color laser printing machine from Konica Minolta, model AccurioPress C3070. TECHNICAL DETAILS Manufacturer/Model: Konica Minolta AccurioPress C3070 Equipment Class: Digital Color Printing System / Production Printing System Itjdpfxezu Aris Ah Dok Serial Number: AAC3021001514 Printing Technology: Color Laser Maximum Format: DIN A3 Page Counter: 1,184,396 pages Network: Yes WLAN: Yes Duplex Printing: No MACHINE DETAILS The machine is offered expressly in an untested condition. A function test is not currently possible due to the missing hard drives or SSDs. This also applies to the printer controller. Therefore, the technical functionality of the main unit and the accessory components could not be confirmed. Hard Drives / SSDs: Missing Function Test: Not possible Technical Condition of Main Unit: Untested Technical Condition of Accessories: Untested Cosmetic Condition of Main Unit: Moderate signs of wear in the upper and front area Paper tray drawer: Opening or handle torn off Cosmetic Condition of PF-602: Moderate signs of wear in the upper and front area EQUIPMENT Konica Minolta AccurioPress C3070 Printer Controller Serial Number: A00043842 Finisher FS-532 Serial Number: 75710 Paper Feeder PF-602 Serial Number: 75711 Booklet/Finishing Unit SD-506 Serial Number: 75712 RU-518 Serial Number: 75713 Please note the following: The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made excluding any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: not inspected (used), machine/vehicle number: 698501644, No minimum price – guaranteed sale to the highest bidder! For sale is a Canon varioPrint 115 printing system with extensive accessories. The system uses monochrome laser printing technology and supports the DIN A3 format. TECHNICAL DETAILS Manufacturer/Model: Canon varioPrint 115 Equipment Class: Production printing system / printing line Serial Number: 698501644 Printing Technology: Monochrome laser printing Maximum Format: DIN A3 Page Counter: 3,889,839 pages Network: Yes WLAN: Yes Duplex Function: No MACHINE DETAILS The main unit is offered without a hard drive or SSD. The existing data storage medium has been destroyed and recycled. According to the technical report, the printer cartridge is almost empty. The technical condition of the main unit should be checked before commissioning. Hard Drive / SSD: Not available Existing Storage Medium: Destroyed and recycled Printer Cartridge: Almost empty Technical Condition of Main Unit: To be checked before commissioning Accessory Components: Not technically tested / untested EQUIPMENT Canon Paper Folding Unit-J1 (F281270) Serial Number: 75718 Oce 01051 Serial Number: 75721 Itedpszu Aliefx Ah Dek Canon Staple Finisher-W1 (F710700) Serial Number: 75722 Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made excluding any warranty or guarantee. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on site before the end of the auction.

Condition: not inspected (used), machine/vehicle number: XMS00835, No minimum price – guaranteed sale to the highest bidder! For sale is a Canon imagePRESS C850 with extensive accessories and a controller system. This machine is suitable for professional production and color printing in formats up to DIN A3. TECHNICAL DETAILS Manufacturer/Model: Canon imagePRESS C850 Device Class: Copier / Production Printing System Serial Number: XMS00835 Printing Technology: Color Laser Maximum Format: DIN A3 Page Counter: 5,283,148 pages Network: Yes WLAN: Yes Duplex Printing: No Condition: Used Controller System Model: CONTROLLER_T42 Serial Number: 1711072031 Housing: Tower Housing Hard Drive: 500 GB Operating System: Not installed EQUIPMENT Canon imagePRESS C850 Controller System CONTROLLER_T42 Tower Housing 500 GB Hard Drive Booklet Trimmer-F1, Item Number F713900 Document Insertion Unit N1, Item Number F281260 SSD Bridge, Serial Number 75724 SSD Square Fold Module SFM 7714, Serial Number 75723 Paper Deck-C1, Item Number F281030 Booklet Finisher-W1 PRO, Item Number F710700 The printing machine and accessories are offered without technical inspection. A functional test of the individual components could not be carried out. The data storage device of the printing machine has been destroyed and recycled. HDD/SSD of the printing machine is missing. The toner or printer cartridge is almost empty. The controller system does not have an installed operating system. The accessory components are explicitly sold as untested. Please note the following: The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. Itedszu Adfspfx Ah Dek The sale is made with the exclusion of any warranty and guarantee. The information on the technical data comes from the original offer. No guarantee is given for typing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Ijdpjzu N Abefx Ah Dotk Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Automatic wire threading

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 043804 / 55060428, No minimum price – guaranteed sale to the highest bidder! Two machines are offered for sale as a package: 1. Lapping machine Bierther ELAP700-91S 2. Oil mist separator Donaldson B.V.B.A. DMC-MMC Both machines have recently been inspected and certified by DGUV. Data for the BIERTHER ELAP700-91S: TECHNICAL DETAILS Ijdpfx Ahsztqxze Dstk Diameter of lapping disc: 700 mm Inner diameter of truing rings: 275 mm Number of truing rings: 3 Rated speed: 56 rpm MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Mains connection: 3P + N Fusing: 16 A Current consumption: 8 A Motor power: 2.2 kW Power of lapping compound pump: 55 W Sound pressure level: < 70 dB(A) Tank capacity: 10 l Compressed air connection: 4 bar Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,900 mm Height without pneumatics: 1,400 mm Weight without pneumatics: 750 kg Total weight: 900 kg EQUIPMENT Crossbeam for forklift attachment DGUV-certified Data for the DONALDSON B.V.B.A. DMC-MMC: TECHNICAL DETAILS Air volume flow rate: 2,000 m³/h MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,600 x 670 x 2,000 mm Weight: 200 kg EQUIPMENT DGUV-certified

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 24,297 h, machine/vehicle number: 161711, controller model: MAZAK & FANUC L-64, laser power: 1,500 W, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 420 mm, No minimum price – guaranteed sale to the highest bidder! The machine is suitable for processing sheet metal, tubes, and profiles! TECHNICAL DETAILS Iodpfxjztxttj Ah Dstk Travel range X-axis: 1,270 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 420 mm Swivel range A-axis: ±300° Swivel range B-axis: ±135° Laser power: 1,500 W CO₂ laser model: YB-L150A8M Sheet metal dimensions max.: 1,250 × 1,250 mm Table load max.: 145 kg MACHINE DETAILS CNC control: MAZAK & FANUC L-64 Operating hours: 24,297 h Machine weight: 8,300 kg Last operated until: March 2025 Currently disconnected and stored EQUIPMENT Cooler Control cabinet

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Iodpfxoztpmde Ah Djtk Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Dual pallet changer Spindle cooling Iedpfeztpixjx Ah Djtk Oil cleaner Chip conveyor Cooljet Systems oil cooler Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.