Used Programming Instructions for sale (5,802)

Condition: ready for operation (used), Year of construction: 2003, pressure 35.0 t chamfer lenght 1250 mm distance between columns 1095 mm stroke - stepless adjustable 215 mm column arm 410 mm table height 800 mm dayligth 455 mm working feed 10.0 mm/sec return speed 56.0 mm/sec work height max. ca. 875 mm Control DM 51 Number of working hours ~ 13.300 h oil volume 80.0 l operating pressure max. 240 bar voltage 380 V total power requirement 4.0 kW weight 2500 kg range L-W-H 1700 x 1450 x 2250 mm - in checked conditions - machinevideo - Dkjdjx Dc Uvepfx Aggot ?v=Gn6PZEMmnmY Features: - Robust CNC-controlled hydraulic press brake - With DELEM CNC control unit “DM 51” * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Program + tool storage possible * Swiveling control panel, front left - CNC electric motor-driven backgauge (X axis) - CNC electric motor-driven height adjustment of the stop (R axis) - 2x manually adjustable stop fingers - 1x split set of deer foot tools - top - 1x split set of Multi V tools - bottom (16/22/35/50 mm) - Side safety device (swivel doors) + FIESSLER laser safety device - Rear safety device (swivel door) - 1x freely movable double foot switch - 2x front support arms - Machine operating instructions + CE declaration

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Dsdpfek S Dt Tjx Aggjkt Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (400 - 3300 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 200 - 1650 grams (depending on dough) Piston: 1 dough part piston (diameter 150 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Dksdpfx Agjvw R Ihjgot Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Dodpfx Ajg Iihwjggskt Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam Dksdpfsxaa A Nsx Aggot - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible Dkodpfx Ajxabhasgget - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: used, Year of construction: 2001, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tools and products library * Graphical 2D programming * automatic bending sequence calculation and collision detection * EMERGENCY stop button at the front - CNC axis adjustment: * Y1 - Y2 - X - R axis CNC crowning * Manual adjustment of the 2x stop fingers, from the front (Z axes) - CNC electro-motorized table crowning - CNC electro-pneumatic die displacement (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x free-moving foot switch - Lateral safety device (hinged doors) - rear safety device (sliding doors) - original operating instructions ( french ) Dkodpfx Aeyn R Hvjggst

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface Dodpfx Agsxacfmogjkt - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: used, Year of construction: 1996, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 215 mm Dkjdpjxabqbofx Aggot dayligth 385 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10 mm Number of working hours 53.820 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 16.0 KVA weight of the machine ca. 11250 kg range L-W-H 3640 x 2210 x 2375 mm - in checked condition - machine video - ?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library * including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back stop (X axis) - CNC electro-motor / controlled height adjustment (R axis) - manual adjustment of the 2x stop fingers, from the front (Z axes) - manual adjustment of the die displacement, from the front (I axis) - WILA manual table crowning, including analog value display - TRUMPF hydraulic upper tool clamp - TRUMPF manual lower tool clamp - 1x freely movable 2 hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + CE declaration + circuit diagram

Condition: ready for operation (used), Year of construction: 1996, pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left Dksdpfx Ajxabk Isggst * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Dedpfx Agoykpg Hsgjkt Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Year of construction: 2026, condition: new, functionality: fully functional, This is the newest generation of the VarioCooking Center, the iVario Pro L from the premium manufacturer Rational (successor to the VCC 211). This unit is equipped with Balance Power (reduced connection value from 27 to 21 kW). This is new merchandise, original packaging, fully functional, with a full manufacturer's warranty. The offer does not include any accessories, but they can be purchased for an additional charge. These are example photos, as the item is still in its original packaging. The MSRP for this unit is €20,340 net = €24,204.6 gross. You will receive an invoice with VAT shown. Dkjdszbk Itepfx Agget Service: We will gladly assist you in finding a certified Rational service partner throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new products. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: Full manufacturer's warranty / from commissioning High-quality brand-name devices at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 21 / Hz: 50 Year of manufacture: 2026 Capacity: 100 liters Weight: 216 kg Condition: New, original packaging, full manufacturer's warranty Additional information: Balance Power: reduced connection value from 41 to 34 kW Integrated 230 V socket Integrated hand shower with automatic retraction and spray dosage High-quality pot base, seamless with rounded corners Core temperature sensor with 6 measuring points 1,200 programs, each programmable and nameable with up to 12 steps Integrated hose shower on the unit Integrated water drain in the pot Temperature unit can be set in °C or °F Cooking pot can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Including base with plastic feet Functions: Manual mode (30°C-250°C): setting of liquid temperature, setting of pot base temperature, setting of oil temperature Automatic, liter-precise water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and frying) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is exclusively subject to our general terms and conditions (AGB).

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually. Djdszi S U Aopfx Aggjkt

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Dkedpfx Ajzt H Tneggst Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), Morgana Autocreaser PRO 33 Automatic Creasing Machine The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: The Morgana Autocreaser Pro 33 is one of the world’s most popular automatic creasing machines, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, and micro-perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Working width up to 330 mm Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Option to install additional perforating discs – 20, 28, 56, or 90 notches Dkodpfx Aezt H Rmegget Technical parameters: Maximum format (width/length): 330 x 700 mm Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in a single pass: 16 Number of programs: alphanumeric, unlimited Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1450 mm x 522 mm x 1224 mm Net weight: 121 kg Power supply: 230V, 50 Hz

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min Dkedpfxjv Ed U Do Aggst >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: >> HS 401 line control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: GE-50RAY, shaft length: 1,064 mm, workpiece weight (max.): 20 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 125 kg, warranty duration: 24 months, height adjustment type: electric, laser wavelength: 1,064 nm, Equipment: cabin, 50-Watt Fiber Laser with a 3-Year Warranty Your Advantages at a Glance ✅ New ✅ 3-Year Warranty ✅ German-language application software and operating manual ✅ Ready for immediate use – no programming knowledge required ✅ Service, support, and spare parts directly from Germany ✅ On-site or remote training Our Services Dkjdozcrbqspfx Aggst Personal delivery and installation Setup and training on-site or via remote connection Ongoing technical support Fast service and spare parts supply from Germany Technical Data (model-dependent) Laser power: 50 watts Wavelength: 1064 nm Frequency range: 20–100 Hz Marking field: 150 x 150 mm (optional 50, 70, or 110 mm) Repeatability: ± 0.003 mm Engraving speed: up to 7000 mm/s Marking software: EZCAD German / English Pilot laser for preview Laser Class 1 Electric lifting column with motor control Max. component height: approx. 300 mm Connection: 230 V Air-cooled system Weight: approx. 170 kg Service life: over 100,000 operating hours Low maintenance and energy-efficient Included Laser head 150 x 150 mm CE declaration of conformity 3-year warranty German software Training and instruction Invoice with VAT shown Scope of delivery USB cable Power cable Stops USB stick with parameters German operating manual Foot pedal Laser safety glasses Application areas Ideal for: Texts and serial numbers Logos and graphics QR codes and DataMatrix codes Variable datasets Image engravings Metal engravings and commemorative inscriptions Plastics and coated materials Software EZCAD 2.14.0 (German) Supported file formats: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Shipping & Installation If shipped, we configure the machine via remote connection and provide training. Alternatively, we offer personal delivery, on-site installation, and training for your employees. Shipping costs will be agreed upon individually based on the postal code. Consultation We will gladly prepare an individual offer for you. Contact us today and learn more about the advantages of our fiber lasers. Also available as 100-watt and 200-watt versions! Secure this demonstration unit now before the new stock arrives.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, CNC Table Type Boring and Milling Machine - Horizontal | Brand: UNION Type: BFT 105 | Year of construction: 1990 Machining operations: Boring, reaming, deep boring, precision boring, reaming, countersinking, tapping, milling, circular milling, thread milling. Dkjdpjzlal Iefx Aggjt The machine can be inspected under power by prior appointment. Condition: Very well-maintained, second-hand / operating condition. TECHNICAL SPECIFICATIONS: - Travels: - X-axis (table transverse movement): 1.750 mm - Y-axis (headstock vertical movement): 1.250 mm - Z-axis (table longitudinal movement): 1.175 mm - B-axis (table positioning): 360° - W-axis (boring spindle axial adjustment): 450 mm Clamping table: - Clamping surface: 1.250 x 1.400 mm - Maximum workpiece weight with centric clamping: 4 tons - T-slot spacing: 125 mm - T-slot width: 22H7 mm - Centring bore: 250 mm Boring spindle: - Diameter: 105 mm - Axial adjustment: NC-controlled - Tool holder: * with tapered shank: A 50 TGL 7837 * with steep taper: A 50 DIN 2080 * with clamping bolts: UNION 95-2805 (A 50 TGL 42620) DIN 69872-28 Speed ranges: - 3 continuously variable ranges: 4 – 2.500 rpm - Drive power: 23,7 kW - Max. spindle torque: 2.500 Nm Feed rates: Continuously variable feed range - X, Y, Z axes: 1 – 5.000 mm/min - Rapid traverse, X, Y, Z-axes: 10.000 mm/min W-axis: 5.000 mm/min B-axis: 3,2 rpm - Max. feed force: X and Y-axes: 16.000 N Z-axis: 25.000 N Specifications: - Total connected load: 50 kW/130 A - Voltage/frequency: 380 V/50 Hz - Machine weight (approx.): 17 tons - Dimensions: 6.560 x 4.370 x 3.450 mm EQUIPMENT: - 5-axis path control: Heidenhain TNC 355 - Swivelling control panel with central control station - Electronic handwheel - Other comprehensive ranges of accessories, such as tool holders, drill bits, milling cutters, and tool trolleys and cabinets ... - Comprehensive documentation available (foundation plan, circuit diagrams, hydraulic documentation, operating instructions and spare parts lists, programming lists) No guarantee is given for the completeness and accuracy of the technical information and equipment. - Subject to prior sale -

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW Dkjdpfx Agjyiz R Uegot • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm Dsdpfx Agsxabwhogjkt capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces . and a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in the network with a residual current device (FI), this should be universally sensitive and not less than 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device Dkjdpfxjxab S Ej Aggjt

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2025, TOP dishwasher Meiko FV 130.2 Fine filter system Easy Clean concept 3 programs Drainage pump Full wash system Detergent dosing device Rinse aid dosing device Only available from us, DGUV V3 certified Dimensions: 1030 x 900 x 1770 mm, WxDxH Connection: 400V, 32A-CEE plug Used machine, cleaned & SAB tested With warranty + spare parts service Optional: Water filter Maintenance contract Service package Delivery service Instruction & commissioning Dedpfx Agjytmg Nsgekt We have many more dishwashers in stock!

Condition: excellent (used), Kontron 325 Tenary Low-Pressure Gradient Pump HPLC up to 10 mL - Pump system for tenary low-pressure gradients Dkedpfxelkbpts Agget - All low-pressure gradient devices integrated into one solution system - 10 programs with customized instructions - Column shock protection extends shelf life - Intelligent compressibility compensation - Stackable with other/additional HPLC modules - Full control of the AUtosampler 360 via the keypad with a display Type: Double series-piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby, and sapphire Flow rate: 0.05 to 10 mL per minute Flow rate precision: 0.3% RSD (at 1.5 mL/min) Flow rate accuracy: 2% (at 1.5 mL/min) Flow linearity: r2 > 0.998 Pressure: 40 MPa or 7500 psi (flow-dependent) Pressure sensor: Piezoelectric sensor Display: 2x40-character LCD External control: RS-232C Inputs: Injection synchronization, flow stop Outputs: Pressure and drive alarm, pressure signal, relay injection, relay step, RS-232 (for Autosample 360) Power supply: 110/220 V +-10%, 50/60 Hz, 120 VA Dimensions: 40 cm wide, 54 cm deep, and 17 cm high Find more items - new and used - in our shop! International shipping costs upon request!

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: Dkjdpfxjvrckqs Aggot A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Dksdpfxeyq Nyye Aggst Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines