Used Protect for sale (11,555)

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Gsdehv U T Hepfx Adboip Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Gsdehwrghepfx Adbjip Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Gjdpfxehwhfxe Adboip Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Giodehv U Tfopfx Adbjp Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 120 mm, total length: 220 mm, total height: 245 mm, usable tank capacity: 3,300 l, Safe compliant with Valrem. Fire resistance > 120 minutes Gedpfx Asykapfsdbeip External dimensions: Length: 220 cm Width: 120 cm Height: 245 cm Internal dimensions: Length: 170 cm Width: 95 cm Height: 210 cm

Condition: excellent (used), Year of construction: 2005, load capacity: 5,000 kg, Self-supporting, braked rotating device for jig construction, tool making for assembly, welding, painting, etc. Gsdpfxjhtrp Is Adboip with foot-operated remote control, right/left switchable with speed control upon request, surcharge €400 when working with warning light Machine is technically in new condition, almost unused Dimensions: Height to axle center 1000mm Mounting plate 400 x 400 mm Hole spacing approx. 240 x 240 mm External dimensions of box section 1000mm x 850mm More machines of this type in various sizes are in stock. Load capacity up to 5000 kg New machine price over €20,000

Condition: like new (used), Year of construction: 2005, Self-supporting, braked rotating device for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control, right/left switchable with warning light when working with speed control on request (additional charge approx. €400) Machine is technically in mint condition, almost unused Weight 1200 kg Dimensions: Height to axle center 1000 mm Giedpjhua Dfefx Adbsp Mounting plate 400 x 400 mm Hole spacing approx. 240 x 240 mm External dimensions of box section 1000 mm x 850 mm More machines of this type in various sizes are in stock. Load capacity up to 5000 kg New machine price over €20,000

Year of construction: 2006, condition: like new (used), Rotating device cantilever, braked for jigmaking, toolmaking for assembly, welding, painting etc. with foot remote control, right / left switchable with warning light during operation machine is technically in new condition, almost unused Gsdpfxshtzuvj Adbjip weight 1250 Kg dimensions: Height to axle center 1000mm mounting plate 400 x 400 mm hole spacing approx. 240 x 240 mm outer dimensions box part 1000mm x 850mm there are more machines of this type in different sizes in stock. load capacity up to 5000 Kg new price of the machine over 20.000.-€

Condition: used, Year of construction: 2023, Operational machines! Ask for additional information! Gijdpfowctnasx Adbep

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 717N00A2301912, hopper volume: 150 l, MOTAN LUXOR 50 Dryer + BIN S 150 Drying Hopper Gjdpfx Adjwz H T Hjbjip A compact and reliable set consisting of the LUXOR 50 dryer and the BIN S 150 ecoProtect drying hopper with a capacity of 150 liters. Ideal for medium-scale production or applications requiring high quality standards with moderate material throughput. The system features a single-valve configuration with a twin-bed molecular sieve, a blower, and a 10 kW heater. Equipped with a Siemens LOGO! control system and a user-friendly interface, it allows scheduling, automatic or manual operation modes, and monitoring of alarms and safety functions. A dependable solution for precise drying of hygroscopic materials. Technical specifications: • Dryer: MOTAN LUXOR 50 • Drying hopper: BIN S 150 • Hopper capacity: 150 l • Dry air flow rate: 50 m³/h • Rated power: 10 kW • Power supply: 3/N/PE 230/400 V, 50 Hz • Control system: Siemens LOGO! • Total weight: approx. 155 kg • Year of manufacture: 2023

Condition: good (used), Technical data: Manufacturer: Tegometall Type: Cl Suitable for frame profile: CI 100x80 Included in delivery 01x U-stand protector, used Material color: orange Total height: approx. 730 mm total width: approx. 130 mm Gisdpfxeibvkno Adbep inside width: approx. 120 mm depth: approx. 60 mm Material thickness: approx. 5 mm 02x safety pins, used execution: compl. galvanized To secure the stand protectors against unintentional lifting out

Condition: ready for operation (used), functionality: fully functional, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Diameter: 3,500 mm Cylinder height: 5,000 mm Outlet diameter: 200 mm Roof shape: Conical 15° Bottom: Conical shape, apex angle: 60° EQUIPMENT Lifting eyes Lockable manhole, 600 mm diameter with protective grid Support for over-/underpressure protection Gisdpfx Adeymxynebsp DN80 PN10 connection for filling line Connection with blind flange Connection for overflow Connection for level switch

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging system. The system was purchased in 2024, has been dismantled, repackaged, and has never been operated. The original purchase price was €235,000! TECHNICAL DETAILS (according to the manufacturer) Performance: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag material: Paper (2–5 layers) with PE inner liner or PE Weighing range: 10–30 kg Weighing accuracy: 2 Sigma +50g/–0g Weighing accuracy: compliant with PTB MACHINE DETAILS Footprint: (approx.) 20 x 4 m Control voltage: 400 V, 50 Hz – 24 DC, 3 phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors/Gearboxes: SEW Pneumatic components: Festo Material: Stainless steel DIN 1.4301 Cable tray: Brand Cablofill Protection rating: IP54 Gjdpfx Ajymxtzjdbsip Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21, 500–1000 mm radius, zone 22 Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air requirement: 400 Nl/min Protection class: IP54 Aspiration air: 45 m³/min Note: Additional technical data can be found in the attached order confirmation.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Permissible total weight: 27,000 kg Load capacity protection: Three-sided Gijdoym U E Hopfx Adbsp Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service staircase Acoustic start-up warning Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Additional hydraulic connections Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, total length: 1,685 mm, total width: 1,550 mm, total height: 2,260 mm, product height (max.): 310 mm, product width (max.): 150 mm, machine/vehicle number: 100281518, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS Gisdpfoympcmjx Adbop X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Power supply: 200 – 240 V Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H34008-HW, Welding System for Frame Welding of Tinplate Cans with Comprehensive Peripheral Equipment! The new price of the machine was CHF 800,000! The system comprises the following components: - Can Man X7-300 WeldCenter (Serial no.: H34008-HW) - Sheet Transfer and Storage System PowerFEED (Serial no.: H31723) & PowerSTORE (Serial no.: H31503) - Induction Oven PowerCURE (Serial no.: H33620-HS) - Goudsmit Magnetics Palletising Magnet TPLC12804 - BASCO Leak Tester PRE 1024 GLX - Hyfra SIGMA 28-S Chiller Further configuration details can be found in the attached document. Can Man X7-300 WeldCenter TECHNICAL DETAILS (according to manufacturer) - Production output: 100 – 600 pcs/min - Strip speed: 10 – 100 m/min - Sheet thickness: 0.10 mm – 0.28 mm Can body dimensions: - Min. can body dimensions: Ø 52 x 50 (height) mm - Max. can body dimensions: Ø 153 x 320 (height) mm Goudsmit Magnetics Palletising Magnet TPLC12804 TECHNICAL DETAILS - Product diameter: 65 mm – 230 mm - Product weight: max. 5 kg - Pallet size: 1,200 x 800 mm MACHINE DETAILS - Magnet dimensions: 1,226 x 826 mm Pneumatics: - Working pressure: 6 – 8 bar - Air consumption: 8 L/stroke Ambient temperature: -20°C to 40°C Robot interface: Available Vacuum system: Integrated EQUIPMENT - Interface for robotic arm - Integrated vacuum system for handling sheets between can layers - Perforation pattern for robotic arm - Magnet plate (2x) - Vacuum connection (1x) - Pneumatic tubing (3x) - Sensor connection box Hyfra SIGMA 28-S Chiller MACHINE DETAILS Dimensions & Weight: - Dimensions (L x W x H): 715 x 715 x 1,554 mm - Weight: 210 kg EQUIPMENT - Tank volume: 120L - Scroll compressor - Stainless steel frame construction - Automatic water make-up - Bypass valve - Water level indicator - Pressure gauge in water supply - Dry-running protection pump - Ball valve for tank drainage Gsdpfx Adoymxlqeboip - Fault indication with digital display - High-efficiency condenser - Metal filter cells

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Gedpfx Adjypdw Dsbjip Portal loader GL 100 F

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91128553, Year of construction: 2018, operating hours: 1,213 h, load capacity: 1,400 kg, lifting height: 4,550 mm, mast type: triplex, fork length: 1,150 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 4,550 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex Power: 6 kW Fuel type: electric Battery model: 4EPZS 620 Battery capacity: 620 Ah Remaining battery capacity: 95% Battery voltage: 48 V Battery weight: 935 kg Tyre condition: 65% Godpfx Ajyq Hirodbeip Front tyre type: Superelastic tyres (black) Rear tyre type: Superelastic tyres (black) Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,270 x 2,200 mm Unladen weight without battery: 2,105 kg Total weight with battery: 3,040 kg Operating hours: 1,213 h EQUIPMENT Cabin Pallet forks Sideshift Central lubrication system Standard joystick Operator protective roof Full free lift Battery charger model SLT150

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input Giodpfx Adoyug Hxjbop • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, This listing is for the Berkey Plasmatherm Laboratory plasma thawer The units are in full working condition and are ready for immediate use These items show very little signs of use Available in original packaging with manuals Gedpsyufrgofx Adbjip The Barkey Plasmatherm is a specialised laboratory and clinical device designed for the safe thawing and warming of fresh frozen plasma (FFP), blood components, and other infusion products. The system uses controlled dry-heating technology to ensure uniform and gentle thawing while maintaining the integrity of sensitive biological samples. Unlike traditional water baths, the Plasmatherm operates using a sealed temperature-controlled system that prevents direct contact between samples and water. This improves hygiene, reduces contamination risk, and simplifies maintenance. The device maintains precise temperatures typically between 37°C and 45°C, ensuring optimal conditions for plasma thawing and blood warming procedures. Safety is a key feature of the system, incorporating over-temperature protection, leak detection sensors, and visual and acoustic alarms to alert operators to any irregularities. A transparent lid allows continuous monitoring of the thawing process while the intuitive control interface enables easy operation and accurate programming of temperature and time settings. The Plasmatherm is widely used in hospital blood banks, transfusion services, and clinical laboratories where rapid, reliable, and hygienic thawing of plasma and blood products is essential. Its efficient design helps laboratories improve workflow while maintaining strict compliance with transfusion and laboratory safety standards.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: Multiple on request, Continuous Potato Peeling Line – Tong Engineering & Sormac Equipment This continuous potato peeling line combines reliable Tong Engineering handling equipment with efficient Sormac peelers to create a complete solution for high capacity potato processing. Designed for consistent product flow and dependable performance, the system is well suited to processors looking to streamline their peeling operation. The equipment moves potatoes smoothly from cleaning and peeling through inspection, treatment, and final product safety checks. With trusted machinery from Tong and Sormac, this line delivers both efficiency and durability in demanding production environments. Equipment Included Tong Engineering De-Stoner The process begins with a Tong de-stoner, which removes stones, soil, and heavy debris from incoming potatoes. This stage protects downstream equipment and ensures cleaner product enters the peeling process. Two Sormac Continuous Peelers The line includes two Sormac continuous peelers designed for high capacity peeling while minimising product loss. These machines efficiently remove potato skins while maintaining consistent throughput for industrial potato processing operations. Tong Engineering Surge Tank A Tong surge tank regulates product flow between processing stages. This buffer helps maintain a steady supply of potatoes through the system and prevents bottlenecks during production. Tong Roller Inspection Table The Tong roller inspection table allows operators to visually inspect peeled potatoes and remove defects. Rotating rollers spread the product evenly, improving visibility and making quality control easier. Tong Dip Tank with Dosing Unit A Tong dip tank with integrated dosing unit allows potatoes to be treated with anti-browning or preservation solutions. This step helps maintain product appearance and supports shelf life after peeling. Loma IQ3S Metal Detector The final stage of the continuous potato peeling line is a Loma IQ3S metal detector, which checks the finished product for metal contamination and helps meet food safety standards. Key Benefits Giedpfjytn H Dox Adbep Complete continuous potato peeling line for commercial processing Combination of Tong Engineering handling equipment and Sormac peelers Designed for efficient stone removal, peeling, inspection, and treatment High throughput suitable for industrial potato processing Integrated metal detection for product safety Reliable equipment built for demanding production environments Suitable Applications This equipment is ideal for: Potato processing facilities Fresh produce packing operations Ready meal manufacturers Vegetable processing plants Enquiries If you are interested in this continuous potato peeling line, please get in touch for further information, pricing, and availability. The system offers a dependable solution for large-scale potato processing. Five individual lines available We hold a wide range of new and used food processing machinery in stock, some of which may not be showing on our website. If you have any additional requirements please get in touch

Condition: used, This listing is for the Thermo Scientific Multifuge Pro Centrifuge Series The units are in full working condition and are ready for immediate use The Thermo Scientific™ Multifuge™ Pro Centrifuge Series (including the X4R refrigerated model) is a high-performance, versatile laboratory centrifuge designed for high-capacity, general-purpose processing. Featuring a 4-liter capacity, these units are ideal for cell culture, blood separation, and microbiologyKey Features: - Auto-Lock™ Rotor Exchange: Tool-less, push-button rotor exchange for fast application changes in under 3 seconds. - Intuitive Interface: A full-color touch screen provides easy, rapid programming, with storage for up to 100 programs. - Versatility & Capacity: Compatible with up to 18 different rotors (swing-out and fixed-angle) with a maximum speed of 15,200 rpm (up to 25,830 x g). - Sample Protection: ClickSeal™ biocontainment lids provide certified, glove-friendly, snap-on sealing for safety. - Efficient Design: The X4R refrigerated model includes a powerful cooling system for temperature-sensitive samples, with a range of -10°C to +40°C. Gedpfx Aoyt Naxjdbsip - SMARTSpin™ Technology: Advanced rotor management optimizes acceleration, braking, and residual load imbalance.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Elgo, controller model: P40T, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 8 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 13 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 12,000 kg, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, number of support arms: 2, Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, 2021 MVD B13-3100 Guillotine Shears with Elgo P40T Control – Very Good Condition For sale is a 2021 MVD B13-3100 Hydraulic Guillotine Shear, equipped with the advanced Elgo P40T CNC Control. This machine is in very good condition, having been installed in 2021. The MVD B-Series shears are built for precision, productivity, and reliability, offering powerful hydraulic cutting performance with CNC-controlled accuracy. Perfect for fabrication shops, subcontractors, and sheet metal production. Machine Make: MVD Gjdpfx Adjxddzqjbeip Machine Model: B13-3100 Machine Type: Hydraulic Guillotine Machine Capacity: 3m x 13mm Machine Year: 2021 ✅ Key Features 3100 mm cutting length – handles large sheet sizes with ease 13 mm sheet capacity (mild steel) – robust heavy-duty performance Elgo P40T CNC Control – programmable backgauge, stroke, and cutting settings Hydraulic swing beam design – consistent and accurate cutting results CNC backgauge system with motorised adjustment Rugged welded frame for stability and precision Front sheet supports and squaring arm for operator convenience Safety light guards for operator protection Very Good condition – 2021 model, very low hours 📐 Technical Specifications – MVD B13-3100 Guillotine Shears Cutting Length: 3100 mm Capacity (Mild Steel): 13 mm Capacity (Stainless Steel): ~8 mm Backgauge Travel: 1000 mm (CNC controlled) Control: Elgo P40T CNC touchscreen – programmable stroke, backgauge, cutting angle Stroke per Minute: 8–20 (adjustable) Cutting Angle: 0.5°–2.5° adjustable Throat Depth: ~100 mm Main Motor Power: 22 kW Hydraulic System: High-pressure precision hydraulics Dimensions (L×W×H): ~4000 × 2200 × 2100 mm Weight: ~12,000 kg 🌍 Condition Year of Manufacture: 2021 Control: Elgo P40T CNC Model: MVD B13-3100 Condition: Very Good – lightly used Ready for inspection and immediate delivery 🔑 Summary This 2021 MVD B13-3100 Hydraulic Guillotine Shear with Elgo P40T CNC Control offers 3100 mm cutting length, 13 mm capacity, and CNC accuracy. A modern, reliable, and powerful sheet metal cutting solution ideal for fabrication, subcontracting, and production facilities. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESA, controller model: S660W, bending force (max.): 175 t, working width: 3,700 mm, stroke length: 210 mm, throat depth: 410 mm, distance between stands: 3,200 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, number of axes: 4, type of crowning: motor-driven, travel distance X-axis: 750 mm, back gauge adjustment: CNC-controlled, back gauge: 750 mm, overall weight: 9,800 kg, total length: 5,305 mm, total width: 2,430 mm, total height: 2,840 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, 2021 MVD A175-3700 Hydraulic Pressbrake with ESA S660W Graphic Control – Very Good Condition For sale is a 2021 MVD A175-3700 Hydraulic CNC Pressbrake, equipped with the advanced ESA S660W Graphic CNC Control. This machine is in very good condition, and is ready for immediate use in production. MVD are globally recognised for their high-precision sheet metal forming machinery, combining durability with operator-friendly CNC controls. The A175-3700 offers exceptional performance for fabricators, subcontractors, and manufacturing companies needing reliable and accurate bending of sheet materials. Machine Make: MVD Machine Model: A175-3100 Machine Type: CNC Pressbrake Machine Capacity: 3700 x 175T Machine Year: 2021 Machine Control: ESA S660W CNC Graphic Control Gisdpfx Ajxddw Eedbep ✅ Key Features 175-ton hydraulic pressbrake with 3700 mm bending length ESA S660W Graphic CNC Control – intuitive 2D/3D programming, touchscreen interface 4-axis CNC (Y1, Y2, X, R) for flexible production High precision crowning system for consistent bending angle Heavy-duty welded steel frame for stability and long-term accuracy European-style tooling system – quick and easy tool changes Safety light guards for operator protection Excellent condition – 2021 model, lightly used 📐 Technical Specifications – MVD A175-3700 Press Capacity: 175 tonnes Bending Length: 3700 mm Distance Between Frames: 3200 mm Stroke (Ram Travel): 210 mm Daylight Opening: 465 mm Throat Depth: 410 mm Table Width: 90 mm Axis Configuration: Y1, Y2, X, R (4-axis CNC) Control: ESA S660W Graphic CNC – touchscreen with 2D/3D programming Backgauge Travel: 750 mm Approach Speed: 180 mm/s Bending Speed: 10 mm/s Return Speed: 130 mm/s Main Motor Power: 15 kW Machine Dimensions (L×W×H): 5305 × 2430 × 2840 mm Weight: 9,800 kg 🌍 Condition Year of Manufacture: 2021 Control: ESA S660W Graphic CNC Axes: 4-axis (Y1, Y2, X, R) Condition: Very Good Ready for inspection and delivery 🔑 Summary This 2021 MVD A175-3700 Hydraulic CNC Pressbrake with ESA S660W Graphic Control offers 175 tonnes of power, 3700 mm bending capacity, and advanced multi-axis CNC control for accurate and repeatable bending. An ideal choice for workshops and production facilities requiring a reliable, modern, and precise pressbrake. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Gsdowwau Nopfx Adboip Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router Notes: *Specifications are given in good faith but not guaranteed*