Used Rockwell Hardness Test for sale (11,575)

Condition: used, TECHNICAL DETAILS Gisdpfx Asuhb I Iodbop - Durometer for production line control of soft rubber and elastomers and all natural rubber products.

Condition: used, Manufacturer: Wolpert Giedpfxjxcu Raj Adbep Type: 751 N

Condition: good (used), Hardness tester functional Giedpoydlf Sefx Adbsp

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete Giedpfexmv H Rsx Adbop - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Determination of compressive strength Gedexb Nv Uspfx Adbjip

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4NTV88BXIHR, overall weight: 848 kg, fuel type: diesel, tank capacity: 190 l, color: red, power: 16 kW (21.75 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 16 kW (21.75 HP), nominal power (apparent): 20 kVA, continuous power: 16 kW (21.75 HP), continuous power (apparent): 20 kVA, total length: 2,150 mm, total width: 1,040 mm, total height: 1,550 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, fuel consumption (combined): 3 l/100km, fuel consumption (urban): 3 l/100km, fuel consumption (extra-urban): 3 l/100km, fuel: diesel, fuel tank capacity: 190 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 380 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 1,550 mm, control cabinet length: 2,150 mm, control cabinet width: 1,040 mm, noise level: 65 dB, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 20 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage V. De efficiënte Yanmar motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 190 liter heeft de generator een autonomie van maximaal 48 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. ### Technische Specificaties: - Model: Bredenoord 20 KVA - Nom. vermogen: 20 KVA - Max. vermogen: 20 KVA - Motor: Yanmar 4TNV88BXIHR - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 20 KVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 65 dB(A) op 7 meter - Brandstoftank: 190 liter - Autonomie: - 100% PRP: 40 uur - 70% PRP: 56 uur - Motorvermogen: 16 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3,38 m x 1,03 m x 1,5 m - Gewicht: 848 kg - Emissieklasse: Stage V ### Brandstofverbruik: - 100% PRP: 4.7 L/h - 70% PRP: 3.42 L/h - 50% PRP: 2.3 L/h ### Opties: - Motorverwarming - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: Giedov Rncispfx Adbop De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 20 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 500 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system Gsdpsyt Idvofx Adbjip The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time Gedpfxox Eabpe Adboip - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C Giedpfx Asx Eaxbjdbjp - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climatic Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test cell enables testing of the functionality or material properties of a specimen under the influence of temperature and humidity. Optimized air circulation with a high recirculation rate ensures effective climate transfer to the test specimen. The air conditioning compartment is located at the rear of the interior chamber. The units are housed in a separate frame behind the main device and are easily accessible. The control system is installed in a separate control cabinet, and the control panel is integrated into the cabinet door. For dehumidification, the test cell features a self-regenerating compressed air dryer. Fresh air can be flushed into the test chamber using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and radiant heat, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C Gedpfx Ajx D Abpsdboip - Humidity range: 10% to 95% r.H. - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional equipment. Dimensions: - Interior (Test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm - External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Additional Information: - Inspection possible by arrangement (46325 Borken) - Shipping by freight carrier is possible – costs & arrangements upon request - Scope of delivery: (see picture) - (Changes or errors in technical data reserved) - For further questions, we are happy to answer your call.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Gjdpfsklv H Iox Adboip Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Model: ACS WZH10-4080-2 BT Angelantoni Walk-in Climatic Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and is equipped with advanced safety features specifically tailored for battery and accumulator testing (e.g., lithium-ion). Special feature: Safety equipment for battery testing: The system is specially equipped for battery and accumulator testing, including: - Pressure relief flap for controlled pressure discharge in the event of a malfunction - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → Ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research tests - Endurance, aging, and stress tests Technical data (from nameplates & documentation) General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climatic chamber, double-door Test range: Temperature: –40 °C to +80 °C Relative humidity: 10% to 95% RH Electrical data: Supply: 400 V 3-phase + N + PE 50 Hz Rated power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit strength: 10 kA Refrigeration system Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: External dimensions (approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone. Gedpjyg I Eyofx Adboip

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Modular Environmental Test Chamber Weiss WK 10/40-80 Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and cell tests (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in the event of a fault • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and test environments (subject to customer-specific safety concept/BMS). Gjdjygvw Rspfx Adbjip Description: For sale is a professional environmental test chamber by Weiss Technik, Model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing, making it ideal for industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. The chamber is particularly suitable for: - Functional and service life tests - Material and component testing - Pre-aging and climate simulation - Conditioning of samples - Testing of batteries and accumulators (e.g., lithium-ion) under defined climate conditions (with the appropriate customer-side safety concept/BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and automated. The unit was in use until recently and is fully functional. General Information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% rH Humidity accuracy: ± 5% Dimensions: External dimensions (W×D×H): approx. 3300 × 5000 × 2500 mm Internal dimensions (W×D×H): approx. 3000 × 2200 × 1500 mm Media & Systems: Spray system: Water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical Data: Power supply: 3/N/PE, 400 V AC ±10%, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Environmental test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see picture) (Modifications and errors in technical data and specifications excepted!) For further information please feel free to contact us by phone.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 Giodpfx Aovb Hanjdbop - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Godpfx Adsvb E Uqebsip Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS CW-60/11 – Water-Cooled Climatic Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber allows testing of the function or material properties of a test object under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation volume ensures effective transfer of conditions onto the test object. The air-handling compartment is located at the rear of the interior chamber. The aggregates are positioned behind the unit in a separate frame, providing easy access. The control system is housed in a separate control cabinet, with the control panel installed in the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be flushed into the chamber via a blower. Technical Specifications: Temperature Testing: - Temperature range: –60°C to +90°C - Temperature deviation: ±0.5 to 1 K (over time) - Spatial temperature deviation: ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40°C to +85°C - Cooling: 2 K/min from +85°C to –40°C Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10% to 95% RH - Dew point range: +5°C to +89°C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±2 – ±5% RH (over time) - No heat irradiation - Stabilized conditions Technical data relate to an ambient temperature of +25°C, rated voltage 400 V, without test objects, without irradiation, and without additional equipment. Dimensions: Interior (Test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2,100 mm / Depth: 2,530 mm / Height: 2,200 mm (slight variations depending on configuration) External dimensions: - Width: 2,700 mm / Depth: 5,200 mm / Height: 2,520 mm (variations possible depending on door type, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical design: Giedpfx Ajx Anipodbsp - Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A - Weight: 6,000 kg Notes: - Inspection/viewing possible by arrangement (46325 Borken) - Shipping by carrier is possible – costs and arrangements on request - Scope of supply: (see picture) - (Changes and errors in the technical data reserved; all information is subject to change!) If you have any further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) Cooling Incubator, year of manufacture 2022, equipped with the advanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Special added value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Applications) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Continuous temperature runs and thermal cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers Gedpfex Hf A Rox Adbeip - Research and development laboratories - Test labs & safety testing - Automotive / e-mobility / energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety features: - Automatic & manual CO₂ fire suppression system - Fire detector with optical and acoustic alarm - Mechanical double-door locking mechanism (secure containment) - Spark protection inside the chamber - Exhaust nozzle with reversible overpressure flap - Ports for external inerting (e.g., nitrogen) - Emergency shut-off / manual activation of the extinguishing system - Ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without the risk of explosion or uncontrolled spread. It is not an abuse or destruction test chamber, but a reliable, standards-compliant test cabinet for realistic operational and fault scenarios. Technical core data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit is exceptional: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see photo) (Subject to modifications and errors in technical data. All information is without guarantee!) If you require further information, please don't hesitate to contact us by phone.

Condition: excellent (used), Binder Type: MKFT 720 E3.2 Temperature and Climate Test Chamber, Air-Cooled Temperature range: -70°C to +180°C Humidity range: 10% RH to 98% RH The MKFT climate chamber is a specially designed environmental simulation cabinet for industrial materials testing and environmental simulation. It offers exceptional performance that far exceeds the capabilities of a standard heating chamber, meeting all requirements for materials testing, as well as aging and stress tests. Technical data: External dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Internal dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Internal volume: 734 liters Net weight (empty): 635 kg Maximum total load: 160 kg Maximum load per shelf: 40 kg Temperature performance: Temperature range: -70°C to 180°C Temporal temperature deviation: 0.1...0.5 ± K Spatial temperature deviation: 0.3...2.0 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.0 K/min Gsdpfx Adsyr Hi Uebjip Max. heat compensation: 5000 W Climate performance: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation depending on setpoint: 0.1...1.0 ± K Max. heat compensation: 800 W Electrical data: Rated voltage: 400V 3N~ ±10% 50Hz Rated power: 13 kW 22.2 A Refrigerants: R-404A / R-23 Important information for you as the buyer: The following services are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (See photo) (Specifications and technical details subject to change and error!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Giodpfx Aew Rrvwodbep Max. speed: 0-6000 rpm

Condition: excellent (used), RMS Electrodynamic Vibration Test System Vibration Exciter SW 3006+ Power Amplifier TGA 1500 Technical Data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Stroke pk-pk: 26 mm Gsdpfxjhyly Re Adboip Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible Scope of delivery: (see picture) (Changes and errors in the technical data may apply!) We are happy to answer further questions by phone.

Condition: excellent (used), RMS Type: SW 3509 + TGD 6000-000.00 amplifier and fan RMS Electrodynamic Vibration Test System Technical data: Sine: 7.5 kN Random: 6.7 kN Shock: 13 kN Displacement pk-pk: 25.4 mm Velocity: Sine 1.5 m/s Random 2.5 m/s Shock 2.5 m/s Acceleration: 100 g Cooling: Air-cooled Total weight approx. 4000 kg Giedpehylymefx Adbsp Condition: used Scope of delivery: (see image) (Changes and errors in technical specifications reserved!) We are happy to answer further questions by phone.

Condition: ready for operation (used), SBM Hopper with Vibrating Chute and Grizzly Screening Machine Giodpoyuk Uaofx Adbsp Brand: SBM Austria Dim. Hopper: 6000 x 2500 x 1000 mm Vibrating Chute: Length 3500 mm – width 1200 mm. Driving: 2 pieces vibration motors of each 3,5 kW. Surface Screen: 2200 x 1200 mm. Driving: E-Motor 11 kW

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Giodpfoxugq Aox Adbjp Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Gjdpfxjuk I Nxj Adboip

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Gisdpfx Adsukitxebsp Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m