Used Rockwell Hardness Test for sale (11,590)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. Gbodexqxt Iopfx Adbji The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. Godpfxoxqxw To Adbjbi #8312-2

Condition: used, max. wheel diameter 0 mm gear width 0 mm max. module 40 min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m Gbodpfevn Unysx Adbsi pitch and run-out tester unit for gear measuring machines.

Condition: good (used), -Testing device for electrical equipment -each with isolation transformer Gbodpfx Adjb A Ivzsbsi -Number: 7 available -Price: per piece

Year of construction: 2021, condition: like new (used), (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, Gbsdpfxowurq Ro Adbji for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Gbsdpfswurqkjx Adboi Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Gbsdpjxw N Uvofx Adbji Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance Gsdpfxsycvd Ne Adbsbi The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete Gbodpoyc H N Njfx Adbei

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Gbedpfsya Ev Nex Adbei Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional Leak Testing, Sniffer & Vacuum Operation Description: For sale is a professional helium leak detector Pfeiffer Vacuum HLT 560. The device is designed for highly precise leak detection using helium and is typically used in industry, manufacturing, quality assurance, laboratories as well as technical service. It is suitable for safe detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffer modes. With the sniffer probe, leak locations can be specifically pinpointed, while in vacuum mode, entire assemblies or systems can be tested. An integrated turbopump and forepump make the device a complete, mobile test system. Applications (examples): - Leak testing of components and assemblies - Testing of vacuum chambers, pipelines, valves, heat exchangers - Quality control in production - Service and maintenance work on vacuum equipment Technical Data: Gedpfjyaxu Ssx Adbjbi Manufacturer: Pfeiffer Vacuum Model: HLT 560 Test gas: Helium Measuring principle: mass spectrometric helium leak detection Operating modes: vacuum operation / sniffer operation Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge port Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 44 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) Further questions can gladly be answered for you by phone.

Condition: used, functionality: fully functional, Rotary testing machine for testing transformers 8 stations Testing stations for: voltage, input/output Gbedpfx Aeyl Adzedbsi current (mA), high voltage, pad printing Test adapters for all common EI transformers included

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., Gsdpfort U Nusx Adbjbi non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Godpfsyl S Eusx Adbobi

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Gedpfx Ajx Up Igodbebi Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Gbsdpfx Asit Ev Tjdbji Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1997, Technical details: Gbjdpfx Adox Uzvvsbei max. wheel diameter: 5 - 350 mm max. module: 20 weight of the machine ca.: 0,8 t min. module: 0,5 dist. between centers: 5 - 750 mm table diameter: 260 mm z-axis: 600 mm y-axis: 185 mm max. helix angle: 45 °

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 24 kg, total height: 1,000 mm, total width: 330 mm, total length: 530 mm, The MultiTest 2.5dV is one of the most widely supplied tensile and compression test stands. The tester is robust, precise, and fully customizable with load cells, grips, and software. The MultiTest 2.5dV can be fitted with load cells ranging from 2 N to 2.5 kN, depending on your requirements. The VectorPro Lite software is highly intuitive and features a clear interface. This makes the tester suitable not only for laboratories and inspection rooms, but also for use directly in production environments. When using the software, all data is automatically stored and can be retrieved at any time. Without the software, the tester operates as a stand-alone device and can transmit measurement values to a computer in multiple ways. Gbsdpfx Adox Apntsbji The price includes a load cell of your choice, cables, delivery in the Netherlands and Belgium, commissioning, and training. We offer a 2-year warranty. The VectorPro Lite software is available for an additional €1,000, and grips are not included in the price.

Condition: excellent (used), Year of construction: 2019, Ref: 11036 . 2019 Peroni Ruggero AGD EIM Semi-automatic machine to thread and glue one flat elastic band onto hard cases. Features: Gbedpfsxx Uwrox Adbei For one single elastic width (5 mm up to 15 mm) Meler hotmelt glue system Materials:- flat covers of diaries, notebooks, planners etc Specification: Cover thickness: min. 1 mm – max. 2,5 mm (3,5 mm for foam board cases) Min case size: 100mm x 220mm Mechanical speed: up to 8pcs/min Electrical power required: 4 kW – 220 V – 50Hz Pneumatic consumption: 80 Nl/min. Overall dimensions: 1500 mm x 900 mm x 1350 mm (h)

Condition: new, Year of construction: 2025, COMPLETE LINE FOR HARD COVER BOOKS including; Gbodpfxedv Ea Ie Adbsi 1. SEMIAUTOMATIC CASEMAKER MACHINE MAGRAF KO-50x70 PLUS 2. CASING-IN MACHINE MAGRAF UK-46 3.PRESSING AND JOINT FORMING MACHINE MAGRAF PK-50x40 PLUS 4.HEAD BENDING MACHINE MAGRAF KV-10 5.CORNERING MACHINE MAGRAF ZA-10 6.ENDPAPER GLUING MACHINE MAGRAF FO-32 All machines are new,produced in Croatia For other information please contact us MAGRAF

Condition: refurbished (used), functionality: fully functional, battery capacity: 625 Ah, remaining battery capacity: 75 %, battery voltage: 80 V, total length: 1,025 mm, total width: 650 mm, total height: 630 mm, overall weight: 1,495 kg, fuel type: electric, type of output current: DC, battery manufacturer: AIM, Forklift battery 80V 5PzS625 TESTED 75% Gjdoynlp Sspfx Adbjbi Dimensions (LxWxH): 1025mm x 850mm x 630mm Year of manufacture unknown Weight: 1495kg Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test): 473/625 Ah battery Remaining capacity: 75% With Aquamatik filling system (BFS) With pole screws but WITHOUT end discharge cable

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification Gbedpfsx Slm Hjx Adboi 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2022, condition: excellent (used), Machine for producing pressed pâtés, semi-hard and hard Gbodpfx Aexf I I Dsdbei

Condition: excellent (used), functionality: fully functional, total height: 8,000 mm, installation height: 5,970 mm, total width: 6,000 mm, total length: 7,700 mm, table width: 3,500 mm, table length: 2,500 mm, table load: 59,000 kg, stroke length: 2,500 mm, pressing force: 300 t, Clamping force: 300 Ton Opening force of movable platen: 100 Ton Operating pressure: 250 bar Platen dimensions: 3,500 x 2,500 mm Minimum mold dimensions (at max clamping force): 2,800 x 2,000 mm Minimum daylight between platens: 1,400 mm Height of clamping platen from foundation: 930 mm Movable platen stroke: 2,000 mm Sliding table stroke: 2,500 mm Tilting angle of oscillating table: 110° Max. upper mold weight: 24 ton Max. lower mold (sliding table) weight: 59 ton Ground clearance: 5,970 mm Overall height: approx. 8,000 mm Machine width: approx. 6,000 mm Gbsdpfjymltuex Adbei Machine depth: approx. 7,700 mm

Condition: good (used), test mandrel, tool holder, milling holder, milling tool Gbsdpfjvz Urxsx Adbji -Manufacturer: Bahmüller, boring bar -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg