Used Roto Casting for sale (2,256)

Condition: good (used), Cast iron control/tracing marble Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T Nljdpfx Adjvvta Rjtsa

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Nledpewlhflofx Adtja Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Pair of cast iron angle plates Width: 1000 mm Height: 2075 mm Nodpfjxx Tvgox Adtola Depth: 700 mm Unit weight: 1 T

Condition: used, Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm Nedpfxow Aavko Adtsla T-slots dimensions: 38 x 22 mm Weight: approx 600 kg

Condition: used, 2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm Nljdpfx Adsxx T Amjtsa V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit Ideal for positioning large rotors

Condition: used, Cast iron marble plate on feet Length: 1200 mm Width: 1200 mm Height on feet: 780 mm Nodpfx Adow Emp Astjla Weight: approx 1,5 T

Condition: used, Cast angle plate Width: 640 mm Height: 400 mm Depth: 320 mm Slots dimensions: 100 x 24 mm Nledpfxexm Sgys Adtea Weight: 110 KG

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Nedepah U Topfx Adtjla Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: used, Year of construction: 2004, Cast epoxy resin - dry - 3 phase distribution transformer, manufacturer TESAR Italy, year of manufacture 2004, power 2500kVA, voltage ratio 20 (2x±2.5%)/0.4kV, AN-AF (forced ventilation, permanent overload 30%), Dyn11, uk=6%, IP00, standard losses, functional, complete documentation and rutine test report. Nljdjwpb Etepfx Adtsa

Year of construction: 2007, condition: good (used), Oil transformers Cast resin transformers Transformer stations Repair plant 250 transformers immediately from stock 50 kVA to 63 MVA Nlododrn Svopfx Adtja 6 - 110 kV

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, total height: 765 mm, overall weight: 850 kg, total width: 1,000 mm, total length: 1,500 mm, Measuring and marking plate Njdpfxewr Umps Adtela Cast iron Precision surface plate Manufacturer: FUJITA Type:JIS B 7513 Surface size: Length:1500mm Width:1000mm Height:250mm Flatness of the surface used (μm) Accuracy exceeding JIS standards Accuracy according to JIS standards No. 210 (Grade 0): 8 No. 211 (Class 1): 16 Weight: 850kg + support frame: ca 120kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Nsdpfx Adjwpr Ufotela Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Condition: like new (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, overall weight: 56,000 kg, Clamping force: 11.168 kN Clamping force: 1.138 Ton Ejection force: 433 kN Max. die height: 1,050mm Min. die height: 450mm Plate dimensions HxV: 1.620 x 1.620mm Tie bar spacing: 1.000 x 1.000mm Tie bar diameter: 200mm Movable platen stroke: 960mm Ejection stroke: 230mm Working pressure: 180 bar Dry Cyclyng: 2.5 n/1" Pump motor power: 45kW Machine weight: 56T Nedpfxou Svace Adtsla Machine dimensions: 10.8 x 4.5x 4.3m

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, For sale: Roto Passat 980/N Koenig Maschinen – used rotary oven The Roto Passat 980N is a rotary oven designed for baking high-quality bakery products. Smooth power control ensures optimal baking results for all types of rolls and breads. The oven has undergone a complete overhaul at our Cream Serwis facility in Poland. Nledpfox Hx Tpex Adtja Details: Prepared for oil or gas firing, Without baking trolleys, 99 programmable work programs, Baking surface up to 11 m², Designed for 18- or 20-level trolleys for trays sized 580 x 780 mm or 580 x 980 mm, Computer control via touch panel with adjustable airflow intensity in the baking chamber, Includes 1 NEW gas or oil burner, Welded oven construction. If you are interested in our offer or require more information, please contact us. We invite you to inspect the unit at Cream Serwis in Prudnik.

Condition: new, Year of construction: 2023, New cast resin, epoxy dry distribution phase transformers manufactured by TESAR Italy, 1 pc 630 and 1 pc 1600kVA, 20000 ( ± 2 x 2,5 %) /400V; Dyn1/5/11 ( adjustable), IP00, year of production 2021 and 2023, ecodesign 1 and 2, project documentation and rutine protocol, manuals, unpacked, 2 years warranty. Nljdpspag H Rjfx Adtsa

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,308 h, functionality: fully functional, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately Nljdpfx Aexuqv Nedtja

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Available immediately Nljdpfx Aexy Idhodtea

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Nljdpexy Hbxefx Adtoa Place: Austria Available immediately

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Nodpfx Adoxy E Sijtjla Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv Njdpfx Aded Nw Ttotela

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler was serviced three months ago. During this maintenance, among other tasks, the slew ring bolts were replaced, and both machine and hydraulic oils were serviced. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Lifting capacity at max. height: 1,500 kg Lifting capacity at max. outreach: 150 kg Slewing turret rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Nlsdpoxr Axdofx Adtja Engine Manufacturer / Cylinders: Iveco / 6 Engine power: 107 kW / 145 HP Fuel tank: 150 l Performance Speed 1st gear: 16 km/h Speed 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrics System voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent four-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS approval Electronic joystick control Merlin control system Tac-Lock carriage Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent four-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Note: The winch (€4,000) and the platform (€1,000) can be purchased separately if required.

Condition: good (used), Year of construction: 2004, 217 USED Herlitzius bread slicer. Year of manufacture: 2004. Nodjxwh Nfopfx Adtola EXTERNAL DIMENSIONS (in cm) - Width: 120, - Depth: 74, - Height: 111. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Nljdpjx Dmgvofx Adtea Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Nedpjrt Tw Dofx Adtela Width: ~4920 mm Length: ~14020 mm Height: ~3085 mm Weight: ~45 ton (product purchase trolley group and moulds are not included) Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar

Condition: used, functionality: fully functional, Specifications: - (54) 22'' x 8'' x 3'' - 7.5 kg capacity moulds on transfer chain - Propane burner Njdpfx Aowtzpyodtola - CSA approved