Used Sawing Line for sale (14,365)

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts Cjdpfx Aolb I Daeaajgr - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: flat 230 x 200 mm capacity 60 degrees: round 175 mm capacity 60 degrees: flat 170 x 100 mm cutting speed 18 - 110 m/min vice max. 350 mm dimensions of saw-band 3370 x 27 x 0.9 mm engine output 1.5 / 1.8 kW Cgsdjyy A Hyopfx Aaaor weight of the machine ca. 880 kg range L-W-H 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame * with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF)

Condition: used, 2 x "Inotec" Twin shaft paddle mixer 2.600L Type IPM 2000 all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard with weighing cells 18 kW in very good condition in good working order + 2 x Outfeed conveyor belt” Type IFB 1300/800 all stainless steel comes under the discharge guards of the mixer plastic belt 0,7 kW outfeed height ± 1.200 mm in a eurobin / Dolav in very good condition Cjdpfxjyxndzo Aaasgr in good working order + 2 x Loader for eurobins Type IHV 2000-300 all stainless steel for 200L or 300 L eurobins dimensions: (L x W x H): ± 900 x 1.300 x 4.020 mm 1,6 kW in good condition in good working order + Elevating spiral screw with infeed belt Elevating spiral screw Type IFS 5600/400 all stainless steel mobile 5,3 kW screw diameter 400 mm Loading height 800 mm Unloading height 3.200 mm dimensions: (L x W x H): ± 5.200 x 2.500 x 4.450mm in very good condition in working order + Infeed belt all stainless steel white pvc belt belt width 700 mm belt length 2.500 mm Unloading height 2.800 mm in good condition in good working order + control box Type IPL 05-02-N Total 58 kW 3x 400V -50Hz 98A Year of construction 2003 dimensions: (lxwxh) : ± 1,800 x 550 x 1,800 mm PLC control system Siemens S7-300 + Simatic panel OP270 + inspection platform The machines will be fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: used, Year of construction: 2013, Overview This high-performance can filling line was manufactured in 2013 by KHS and is designed for large-scale beverage production, particularly beer in aluminum cans. With a capacity of up to 48,000 cans per hour (500 ml), the line represents a modern, high-speed solution including depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The core of the line consists of a KHS Innofill DVD 92 volumetric filler combined with a Ferrum F708G high-performance seamer, ensuring precise filling and reliable closing at maximum output rates. The line has been well maintained and remained in production until February 2026, and is available from Q1 2026. The overall installation features a compact, high-density layout with advanced conveyor and process integration, typical for modern KHS canning lines. Technical Data Capacity: 48,000 cans per hour (500 ml) 41,000 cans per hour (568 ml) Container type: Aluminum cans Formats: 500 ml 568 ml Can dimensions: Diameter: 66.30 mm Height: 168 mm Lid specifications: Material: Aluminum Diameter: 59.44 mm Height: 2.07 mm Product: Beer Filling technology: Volumetric pressure filling with MID (magnetic inductive flow meters) Seaming technology: High-speed multi-head can seamer Pasteurization: Flash pasteurizer (KZE system) Condition: Very good condition, regularly maintained Availability: Q1 2026 Scope of Delivery Depalletizer | KHS | INNOPAL ASH-LD | Layer depalletizer with pallet lift; up to approx. 450 layers/h | 2013 Filler | KHS | INNOFIL DVD 92 | Volumetric pressure filler with MID technology; up to 48,000 cph | 2013 Seamer | Ferrum | F708G | High-speed can seamer with 8 stations; up to approx. 60,000 cph | 2013 Lid Feed System | NSM Magnettechnik | – | Automated lid feeding and distribution system | 2013 Flash Pasteurizer | KHS | INNOPRO KZE 250 | Continuous flash pasteurization with buffer tank | 2013 CIP System | KHS | INNOPRO CIP | Multi-tank CIP system (1,000 – 3,000 L) | 2013 Fill Height Inspector | KHS | Innocheck CUB | Fill level and closure inspection system | 2013 Printer | Leibinger | JET3up | Continuous inkjet printer for coding | 2013 Checkweigher | Radwag | DWT/RC 30 HP | Dynamic weight control system | 2013 Shrink Packer | KHS | INNOPACK SP A-M | Film shrink packer; pad + film capability | 2013 Pack Conveyor | KHS | INNOLINE GTR | Pack transport system | 2013 Can Conveyor | KHS | INNOLINE BTR | Can transport system | 2013 Pallet Conveyor | KHS | INNOLINE PTR | Pallet transport system | 2013 Pallet Warehouse | KHS | INNOLINE MPH 1-1 | Pallet buffer and storage system | 2013 Palletizer | KHS | INNOPAL PB1N1 | Automatic palletizing system | 2013 Pallet Wrapper | ROBOPAC | Genesis Futura 40 | Automatic ring wrapper; up to 95 pallets/h | 2020 Csdjyyviuepfx Aaaegr

Condition: excellent (used), Year of construction: 1998, Cutting width 508 mm Cutting height 305 mm Table size 600 x 560 mm Working height 1000 mm Roll diameter 515 mm Cutting speed 20 - 1000 m/min Saw blade width 3 - 25 mm Saw blade length 3975 mm Saw blade thickness 0.65 - 0.9 mm Drive power 1.5 kW Dimensions L x W x H 950 x 770 x 2000 mm Weight 510 kg Csdpfxovkx H Eo Aaaegr Accessories / Special features: • Butt band welding device (only suitable for carbon band saw blades up to 0.65 mm wide and not for bi-metal M 42!) • Continuously variable cutting speed • Digital display for the cutting speed • Support table can be swiveled in 2 levels Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1972, 1 used, well-preserved hydro-pneumatic semi-automatic cold circular sawing machine for cutting aluminum, non-ferrous metals, wood and plastic Technical data: max. saw blade diameter 370 mm Cgodpfxjbwl Ems Aaasr Cutting diameter 120 mm Cutting range at 90 degrees: flat 260 x 60 mm Cutting range at 90 degrees: square 105 mm Cutting range at 45 degrees: flat 200 x 45 mm Cutting range at 45 degrees: square 90 mm 0° cut - longitudinal cut: yes 2 speeds 1500 / 3000 m/min Drive cable 1.7 / 2.6 kW Machine dimensions L x W x H 1000 x 1000 x 1700 mm Machine weight 700 kg Accessories / Special features: - Semi-automatic operation: After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released. - Stepless feed - Pole-changing motor - 1 saw blade - Mitre cut on both sides - Longitudinal cut 0° - Spray lever device Special accessories: - 1 roller table right with heavy stop 3500 mm and scale - 1 roller table left, approx. 3500 mm Special accessory price: € 1,500.00 plus VAT. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2008, Very neat semi-automatic bandsaw from Imet Type: BS 350 SHI 2SP Cjdoywwi Djpfx Aaaogr Capacity: 350 x 270 mm Material probe Double-sided mitre cutting Mist and coolant lubrication

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck Csdpfx Ajyub Iqeaasgr It has a 7m cutting length 18.5kWh saw engine

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Cedpfx Aajw Hz T Ejasgr

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) Formats: 250 ml – 1000 ml Application: Hot-fill and cold-fill beverage production Container types: Glass bottles and PET bottles (hot-fill) Filling temperature: 10°C – 104°C CO₂ capability: Yes Closures: Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off PET: 38 mm 3-start hot-fill closure Labelling: Cold glue paper labels (optional sleeve labelling available) Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones Bottle dryer | Europool | - | 2007 | High-speed air dryer Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt Conveyors | KHS / Krones | - | - | Complete conveying system Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial Pallet labeller | Logopack | - | - | Pallet labelling system Reverse osmosis system | MWT | - | - | Capacity 800 l/h Cjdeyx I Awjpfx Aaaegr

Condition: excellent (used), Year of construction: 2021, Roller conveyor length: 3000 mm Type: RBO - ST 60 Heavy-duty version Roller conveyor width: 300 mm Cjdpfxsyza Dlj Aaasgr Steel rollers The foot is slightly bent and needs to be straightened Location: 54634 Bitburg - available immediately -

Condition: excellent (used), Sprossen Punching Machine 12 mm used, in excellent condition Brand: Jeyden Codpfx Aasyza Anoaegr Sprossen blade 12 mm Right-hand support table with adjustable stop Space requirement approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free onto transport, unpacked Sold as seen in current condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 2016, Complete line for packing products like flour, semolina etc into small, fold top paper bags. Was installed new in 2017. Photos show the machine set-up for potatoes. Price of machine without potato weigher is EUR 25,000 Cjdpfjttwt Ajx Aaaegr

Condition: excellent (used), Year of construction: 1989, Elektra Beckum Bandsaw BAS 450 DB Year of manufacture: 1989 Cutting height: 300 mm Blade length: 3,380 mm Motor power: 1.5 kW Weight: approx. 120 kg Csdpfxsyy U Txs Aaaogr Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Push-in length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Csdpfx Aaswx I Hveaegr Further technical data on request

Condition: used, Seitz Stainless Steel In-Line Filter Holder, AISI304 Csdpfx Aaot Dw Tmsasgr - condition: used - location: Brem, Germany - remarks: - Make: Seitz - Diameter: approx. 340 mm - Total height: approx. 430 mm - 3 feet - Outlet DN 20 DIN 11851 (with different connections (see photos)

Year of construction: 2008, condition: ready for operation (used), Highly efficient production line for the production of molded stick ice cream, popsicles and similar products. Capacity of up to 42,000 pieces per hour (can also be used at a reduced hourly capacity). The currently installed mold size is 35ml moldet stick ice cream. Manufacturing date of the line is 2008. Complete line is for sale, including rotary molding system, automatic stick inserter, wrapper, control panels and other components. Full documentation is available. The line was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Approximate space required for installation: 9 x 4.5 m. Cgsdpfspyha Eox Aaaer

Condition: good (used), Year of construction: 2007, Striebig panel saw Evolution 6224, year of manufacture 2007 Cjdpfx Aaovk Sh Ajaegr Type 6224 Year of manufacture: 2007 Motor 5.5 kW Cutting length approx. 5300 mm Cutting height approx. 2100 / 2240 mm Digital display in Y Center support Cutting depth 80 cm Saw blade diameter approx. 303 mm Free-standing installation Slatted frame moving away Wooden back wall Extraction connection D 120 mm Space requirement approx. 6300 mm x 1250 mm x 2720 mm Weight approx. 1200 kg Total connected load approx. 5.5 kW Location: from warehouse 54634 Bitburg, free loading, unpacked Handed over in the current condition as viewed without guarantee or warranty

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Cgjdpfxsx Ezuye Aaaer Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Cgedpfxjyyzqdo Aaaor Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retractable support frame, stable locking of the saw carriage at the top and bottom, electronic monitoring of vertical cutting position locking, fold-away plunge lever on the saw unit, retractable riving knife for cut-outs, control panel at eye level, digital display on longitudinal fence, digital display for horizontal cuts, strip cutting device, lifting roller transport system, edge-trimmable support, dust extraction system (TRK), dust tested ----- Technical Data ----- Cutting length: 5,200 mm, Cutting height: 2,200 mm, Edging height: 2,100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Codpfx Aasyyzp Hsaogr Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Space requirements (LxWxH): 6,500x1,650x3,050 mm, Weight: 900 kg Quality Information: - Guide rails renewed / overhauled - Complete base inspection - Complete base cleaning - Electrical system checked - Immediately ready for use

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Cgodpfeykn Rdsx Aaasr Capacity: 1,320.9 gal Internal pressure: 96 PSI Jacket Pressure: 95.9753 Material of Construction: Glass lined steel

Condition: used, Year of construction: 2016, Overview  This compact filling line for cans and bottles consists of equipment from Wildgoose, Slowbeer, Enos Euro and Millipore and is designed for craft beverage production with flexible batch sizes. The line combines isobaric and atmospheric filling technologies and includes semi-automatic and manual machines for filling, capping, labeling, and product filtration. The core component is a Wildgoose WG1-CE filler (2021), capable of handling both cans and bottles with integrated seaming functionality. With its modular setup, the line is particularly suitable for small to medium-scale producers, pilot production, or specialty beverages such as craft beer, kombucha, cider, or soft drinks. Technical Data  Capacity: Up to 24 units per minute (atmospheric – Wildgoose) Up to 16 units per minute (isobaric – Wildgoose) Additional manual / semi-automatic filling capacity depending on configuration Formats: 20 cl – 1.5 L (depending on machine) Container types: Cans and glass bottles Application: Beer Craft beverages Kombucha Cider Soft drinks Filling technologies: Isobaric filling (carbonated products) Atmospheric filling Manual filling Filtration: 3-stage microfiltration system (Millipore) Configuration: Modular / semi-automatic line Condition: used, good condition Scope of Delivery Can / Bottle Filler | Wildgoose | WG1-CE | Isobaric and atmospheric filling with integrated seaming; 16 cpm (isobaric) / 24 cpm (atmospheric); formats 33 cl / 50 cl | 2021 Manual Bottling Machine | SCH | SCHPK6 | 6-spout manual filler; approx. 250 bottles/hour; formats 20 cl – 1.5 L | 2016 Bottling Machine | Slowbeer | RI4 | 4-spout filler; approx. 350 bottles/hour; formats 22 cl – 1.5 L | 2012 Labeling Machine | Enos Euro | Base | Semi-automatic labeler; approx. 28–30 units/min; formats 22 cl – 1.5 L | 2017 Crown Capper (2x) | Slowbeer | Tap Air Corona | Pneumatic crown cappers; crown sizes 26 / 29 mm | 2012 Microfiltration System | Millipore | 3-stage | Stainless steel construction; 3-stage filtration system | 2016 Additional Information Seaming unit is integrated in the Wildgoose WG1-CE filler The line allows flexible switching between can and bottle filling Ideal for craft production with frequent product or format changes Compact footprint and modular design   Cjdpfx Aaeyxr Aneajgr

Condition: ready for operation (used), Year of construction: 2015, For sale: Holzma OPTIMAT HPP 300/43/32/L panel saw – in very good condition We are offering this well-maintained and exceptionally clean Holzma OPTIMAT panel saw. The machine was purchased new by us and has always been used and serviced with great care. All relevant documentation and manuals are included. Additionally, the machine comes equipped with an optimization package, a grooving package, and a cutting package, making it highly versatile and fully equipped for professional use. With only 7,000 operating hours, the machine is in excellent condition and ready for immediate use. The machine can be viewed in operation at our workshop, allowing you to see its performance first-hand. Please note: the machine must be dismantled in week 18. Specifications: • Manufacturer: Holzma • Model: OPTIMAT HPP 300/43/32/L Cgodeyywz Ejpfx Aaaor • Year of manufacture: 2015 • Condition: very good • Operating hours: 7,000 If you are interested or require more information, please feel free to contact us.

Year of construction: 2000, condition: used, Saw blade diameter: 350 mm Codpfx Aoyx Hmuoaajgr Pneumatic material clamps Micro spray device The sawing table can rotate in both directions