Used Shoe for sale (344)

Condition: good (used), For sale is a used Holzprofi panel saw M2-PS315/2000F with a cutting width of 1000 mm. The machine is in good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical data: - Tilting saw blade 90-45° - Scoring unit (belt drive) - Sliding table 2000 mm - Cutting width 1000 mm (rear part foldable) - Extension table with cross-cut fence 2600 mm - Hold-down clamp and short mitre fence, edging shoe - 3.7 kW / 5 HP motor 400 Volt Gtjdpfxeynahve Ah Ejw The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, sliding table saw Reference: R-C10J6

Condition: used, functionality: fully functional, Year of construction: 2023, load capacity: 800 kg, empty load weight: 200 kg, construction width: 1,800 mm, Bulk material bucket Gtedpou Dyd Nsfx Ah Ejw Technical condition: New Description: Transport of material with a density &#8804 2100 kg/m3 Perfect for transporting grain, soil, gravel... Reinforced construction for maximum load capacity Leveling aid for greater precision Optional bolted LDR shoe rail available on certain models

Condition: excellent (used), CATALOG NUMBER 7773 TECHNICAL DATA - Max width of workpiece: 900mm - Max height of workpiece: 160mm – Top: - Metal pressure roller, slip type I unit – Calibrating rubber grooved roller II unit – 2x Metal calibrating roller + shoe – Bottom: - Feed belt - Pneumatic oscillating belt - Electric table lifting - Main motor 15kW/11kW - Feed motor 1.5kW - Operating pressure 6-8 bar Godpfx Asykaxmeh Eetw - Dust extraction port diameter 2x200mm - Dimensions (L/W/H): 1850x1950x2040mm - Weight approx. 3000kg ADVANTAGES – Italian manufacture – Calibrating sander + pad – Used sander, very good condition Net price: 15,900 PLN Net price: 3,780 EUR (at 4.2 EUR exchange rate) (Prices may change with significant fluctuations)

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,550 mm, Equipment: ABS, bioSTAR 91.3 cbm Basalt Grey Chassis Type: Moving Floor Kingpin Load (National, t): 12 Axle Load (National, t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Gross Vehicle Weight (technically permitted): 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Moving Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Overall Width (mm): 2550 Overall Length (mm): 14000 Godpfx Ahexdqbks Ejtw Chassis Tyre Size: 385/65R22.5 Chassis Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Offset (ET): 120 Option 1st Axle with Traction Aid Traction aid optimised with activation via push button in the truck (installation of button not included in scope of delivery) and by pressing the brake pedal three times Option 3rd Axle: Without Brake Pad Wear Indicator: Connected Tire Pressure Monitoring: Wabco TrailerPulse Air Suspension: ECAS with raise/lower valve Lowering of air suspension via Smartboard, as well as raise/lower valve Coupling Head Pneumatic: European palm coupling Wheels: Speedline Diamond Wheel Nut Caps: Chrome with STAS logo Landing Gear: Weweler steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation, and 2 speed stages Underrun Protection Operation: Fixed underrun bar Lighting Manufacturer: Aspöck Lighting Type: EUROPOINT III – LED 2 pcs. LED reversing lights, rear, installed left and right on lamp bracket Work Lights (operated via switch): 2 pcs. LED reversing lights, front, left and right in direction of travel, mounted in the area of the landing gear Hydraulic Coupling: Rotary coupling Hydraulic Coupling – Position: Connection point at front wall (additionally with connection possibility at landing legs) Hydraulics positioning: pressure back, pressure left, return right (CON) Air connection in the toolbox Aluminum access ladder 3.80 m – right-hand side in direction of travel Broom and shovel holder, three holders each, mounted on chassis, left-hand side in direction of travel Moving Floor System: Brand Cargo Floor Air/electric console centrally mounted in direction of travel, with support bracket Lighting unit protection: one-piece splash guard Body Front wall angle (°): 90 Rear wall angle (°): 90 Rear wall type: Swing doors A-panel: Folding on the rear wall, mounted right in driving direction Cover plate between floor and front wall: Fixed aluminum plate and PVC strips Fifth Wheel Plate Type: Standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Floor system operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor profile type: 8 mm ribbed Moving floor closure plate: Stainless steel With additional plastic guides below the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for moving floor system Residue-free discharge wall Rear wall: Aluminum Swing door version: split 1/2 to 1/2, with transverse door header Door wing opening: right door wing opens first (STAS manufacturer’s choice) Transverse door header: swivel version Door header material: Aluminum Rear door locking: 1x swivel bar per door half

Condition: used, Year of construction: 2020, front tire size: 0%, rear tire size: 0%, _____Base machine Aebi MT750, Euro 6C, 156 HP, 6-cylinder Used Approx. 17,055 km Approx. 1,141 operating hours Speed/Drive Speed limit 85 km/h, 7.5 t Permanent 4x4 drive with lockable center differential Rear axle differential lock Front axle differential lock Wheelbase/Suspension Wheelbase 2.75 m Seats Comfort seat with pneumatic self-adjustment for driver Bench seat for two persons with tool box Tires 245/70 R 17.5 (143/141J) 17.5 x 6.75 SINGLE Cab Cab color orange RAL 2011 Air conditioning including fan Heated exterior mirrors 3-pin exterior socket for winter service lighting Winter service lighting with two headlights 13-pin exterior socket for rear mounting/trailer operation Hydraulics 3rd circuit: 14.4 cc pump for working hydraulics & 21.1 cc pump 1st front auxiliary valve for working hydraulics right 1x DW 2nd front auxiliary valve for working hydraulics left 1x DW Gtodpoyq Attsfx Ah Ejw Power take-off at reduction gearbox max. 82 kW SAE4, mandatory for semi-hydrostat Miscellaneous DAB+/Bluetooth/USB radio Corrosion package Work lights on stand at cab rear wall Red/white warning markings Front implement plate DIN B (size 3) Trailer hitch ball head 3.5 t (Type DEDALO GS501) Automatic trailer coupling 3.5 t Rear axle single, standard springs Clutch booster Customer special equipment 1243193-2 Rear view camera 1279441-6 Tires 245 with snowflake symbol 1224041-6 Second work light 1270690-3 Preparation for light bar Hydrostat MT740/MT750 Aebi MT torsion frame MT750 three-way tipper Profi Parking heater Aebi MT740/750 ----- Including snow plough VPL24 Year of manufacture: 2020 P68-35025015 Plough VPL-24 161353 Wear blades Kombi 36 (VPL-24) P68-35000230 Parallelogram with mounting plate size 3 P68-35080098 Hydraulic super-tilt with DBV - 12 Volt (VPL-15/18/21/24/27/30) 440902 Hydraulic couplings for MULTICAR (flat face) P68-35060360 Set of hydraulic hoses VPL super tilt with DBV 313113 Glide shoe, complete VPL (set) 357461 Warning flags with plastic handle (set) P68-12VOLT 12 Volt, Location: 93095 Hagelstadt

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Low loader semitrailer MAX100 4 A 8.60 U Technical data Speed 80 km/h Total weight 60,800 kg Fifth wheel load 18,000 kg Axle load 42,800 kg Empty weight Payload Gooseneck length 3,850 mm Fifth wheel height loaded 1,250 mm Loading area length 8,600 mm Extendable by 5,400 mm Axle spacing 1,360 mm Rear steering radius 2,300 mm Loading height with max. load 860 mm Total width 2,540 mm Suspension travel -55/+145 mm Technical description Gooseneck With bevelled corners at the front 45° and with rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring 30 mm thick Loading area in extendable version with rear slope of approx. 1,000 mm x 8° 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) 1 pair of lashing rings lying in the front of the loading area (LC 10,000) Hardwood flooring approx. 48 mm thick, checkered plate above the axles Ramps Two-part steel ramps A pair of galvanized two-part steel ramps approx. 2750 +1400 mm x 800 mm with approx. 48 mm thick hardwood flooring Ramp with hydraulically foldable and retractable ramp parts, hydraulic lifting mechanism and hydraulically movable. Maximum load per pair 40,000 kg Tires 235/75 R 17.5 Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc dust primer a high-quality 2-component (2K) top coat in a single color in RAL colors of your choice Rear section metallized and painted in RAL 9010 (pure white). Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction made of high-strength fine grain steels. Steel qualities: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection panel at the front with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: A galvanized steel front wall approx. 400 mm high. 2" kingpin 4 pieces of brake shoes with holder on the bulkhead. A holder for a rotating beacon at the rear of the trailer. SAF axles, two axles rigid, one axle with self-steering, air-sprung, with drum brake, with lifting/lowering function. The self-steering axle with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. Holder in the rear area of the gooseneck for aluminum loading ramps. Galvanized folding supports under the slope of the loading area. Mechanical locking of the loading area. A spare wheel with holder in front of the bulkhead. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection strip at the front. On the gooseneck and on the rear panel on the left and right there is a holder for the warning signs including a socket. A mud flap at the rear of the trailer. Manual and description On the gooseneck, plug-in aluminum side walls and rear wall approx. 2,440 x 400 mm (LX H). Gtodjg Sk T Djpfx Ah Esw The rear galvanized plug-in stanchions are removable. Length of the body approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container

Condition: new, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Technical data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Total weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Gsdpfxjizu Nwo Ah Ejtw Fifth wheel height loaded: 1,200 mm Steering radius to the rear: 2,300 mm Loading area length: 6,850 mm Extendable by: 5,500 mm Loading height with max. load: 350 mm Chassis length: 2,600 mm Loading height of rear chassis with max. load approx: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Total width: 2,540 mm Total weight depends on fifth wheel load. Low bed: Low bed with external supports in extendable design "SUPER LOW" design, length approx. 6,850 mm. Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking. The supply lines are protected in the extendable supports and automatically adjust to the respective low bed length. 5 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner support for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of tension rings lying in the trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm stakes in the outer frame Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,785 mm. Gooseneck can be raised/lowered hydraulically and removed. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2 and 6 x 4 PENDEL-AXLE: "PENDEL-AXLE", all axles hydro-mechanically forcedly steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinder with shut-off valves and pins for securing in raised position. Final painting of the axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260". Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tool. Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting cables to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paint: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Tires: Tires 245/70 R 17.5 3PMSF At the manufacturer's discretion. Load index (146/146F) Preparation for screw-on container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locks. i i2" kingpins iA galvanized steel bulkhead, approx. 400 mm high. iA spare wheel with holder in front of the bulkhead. i2 brake shoes with holder on the bulkhead. iYellow-red air couplings on the galvanized connection strip at the front. Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles. (without insta

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Empty weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height loaded: 950->1,050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Total width: 2,540 mm Technical description Loading area: Loading area in extendable design with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Cut-outs in the outer frame of the loading area for hanging tensioning straps. (LC 2000 da N) Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles: SAF axles: SAF axles CD, air-sprung, with disc brakes (377 mm), with lifting/lowering function. (ET 120). The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80kg) Braking system: Gedpfxeg Sk Tvs Ah Estw Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Electrical system: Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included Yellow-red air couplings on the galvanized front connection panel. 2 pieces of brake shoes with holder. 2" kingpin A galvanized steel bulkhead approx. 2200 mm high. (± 105kg) EN12642-XL Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) on the rear of the trailer. Loading area with approx. 38 mm thick hardwood floor. (± 320kg) 10 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. (± 30kg) 1 spare wheel holder under the loading area on the right in the direction of travel. Tires 435/50 R 19.5 as selected by the manufacturer. A mud flap ( ) on the rear of the trailer. Manual and description on USB stick. A bracket for a rotating beacon on the rear of the trailer. One bracket for a rotating beacon on the gooseneck and on the rear panel on the left and right the warning signs including a socket. An INOX toolbox across the loading area. (1000x400x2500) (± 135kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' container or 1 x 40' container, an additional locking point is provided in the pull-out for a 45' container. (± 90kg) 4 pairs of WADER container locks. (± 60kg) 10 pairs of galvanized plug-in stanchions approx. 100 x 50 mm, 1,000 mm high. (± 220kg) 3 pairs of stanchion pocket strips, mounted across the loading area, for plug-in stanchion

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Gjdpfxexx Rvkj Ah Estw Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/min return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 9800 kg range L-W-H 4150 x 2150 x 2800 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German Gjdpfjxabfxex Ah Ejtw - Safety manual: press brakes

Condition: new, pressure 100 t chamfer lenght 2600 mm distance between columns 2200 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 9.5 mm/sec return speed 155 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 6850 kg range L-W-H 3750 x 1950 x 2800 mm ----- Gtsdpfx Ahexaaqyj Eow Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1050 mm column arm 350 mm dayligth 387 mm work stroke 170 mm table height 850 mm back stop - adjustable 800 mm adjustment speed 230 mm/min ajustment speed 140 mm/sec working feed 10.0 mm/sec return speed 170 mm/sec total power requirement 5.5 kW weight of the machine ca. 3220 kg dimensions of the machine ca. 2150 x 1650 x 2300 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke Godpfow U U Rlox Ah Eetw * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 60.0 t chamfer lenght 2100 mm distance between columns 1700 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm Gtedsxabckopfx Ah Esw oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 5640 kg range L-W-H 3250 x 1960 x 2750 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec return speed 135 mm/sec work speed 10,0 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90,0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15,0 kW weight 11.950 kg range L-W-H 5100 x 2150 x 2850 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles Gtsdpfx Ahsxabaps Eow - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/sec return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 12100 kg range L-W-H 5.100x2.150x2.850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection Gtjdoxaah Sspfx Ah Ejw ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 135 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 12.0 mm/sec return speed 190 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm oil volume 300 ltr. voltage 400 Volt total power requirement 15.0 kW weight 10800 kg range L-W-H 5100 x 2100 x 2850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German Gtedpfxexaa U Eo Ah Ejw - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount Gtedpfsxabt Asx Ah Eow - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: ready for operation (used), Year of construction: 2011, pressure 135 t chamfer lenght 3050 mm distance between columns 2600 mm column arm 410 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 120 mm/sec stroke 265 mm dayligth 530 mm table height 900 mm oil volume 200 ltr. control DNC 880 S Number of working hours ~ 17.200 h total power requirement 15.0 kW weight of the machine ca. 10250 kg. range L-W-H 4570 x 2360 x 2900 mm good condition (!!) current new price approx. 80.000 euros special price on request - in checked condition - machine video - ?v=dyv7iQXcRt4 Equipment: - electro-hydraulic CNC press brake - two synchronized cylinders with "HIGH PERFORMANCE" hydraulic components - with CYBELEC CNC control - "DNC 880S" * 2D graphic display for display and multiple simulation * graphic 2D programming * easy handling * automatic bending sequence calculation and collision detection * large product and tool library * automatic tonnage calculation (pressure) - swiveling operation, front right - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - upper beam with solid, self-lubricating four-way guide - CNC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers * Adjustment range up to max. 650 mm - CNC electro-motor height adjustment of the rear stop (R axis) * Adjustment range up to max. 250 mm - CNC electro-motor table cambering - AMADA/RAPID pneumatic upper tool clamp - AMADA lower tool holder, including die shoe - FIESSLER LASER safety device at the front Gtjdpfxsxablre Ah Eow - 2x front, movable support arms ("Sliding" system) - side safety device (swinging doors) - rear safety device (swinging door) - 1x freely movable foot switch - large hydraulic oil tank to keep the operating temperature low - original operating instructions

Condition: used, Brake shoe set, wheel brake, brake set Gedpfxjfx Auds Ah Eetw -Manufacturer: Knott, wheel brake type 16-1369 -permitted Weight: 450kg - Bolt circle: Ø 100 mm -Price per piece - Quantity: 17 pieces -Dimension: Ø 185 x 195 mm -Weight: 9.1kg/pcs

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Leveling elements: 5 pieces, for machine tools and systems -Price/Sale: complete Gtjdpofzlutjfx Ah Ejw -Dimensions: Ø 220 x 167 mm -Total weight: 34.5 kg

Condition: used, Plastic shoes, chain drive protector, plastic protector, chain drive rubber, chain rubber, chain protector, rubber drive, rubber pads Gjdpfx Ajva Rq Ish Eetw -Schoner: from working platforms from GSL (German Standard Lift) -universal: applicable -Quantity: 318x savers available -Minimum order: 4 pieces -Price: per piece -Dimensions: 315/59/H36 mm -Weight: 1.2 kg/piece

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -min. height: 56 mm -max. height: 68 mm -Quantity: 2 pieces -Price: per piece -Dimensions: 190/145/H63 mm Gtedpfx Aheu N Sgys Esw -Weight: 6.9 kg/piece

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems 3 pieces Godpew U Rf Sefx Ah Eotw -min. height: 50 mm -max. height: 62 mm -Shipping/Price: complete -Dimensions: 165/75/H58 mm -Weight: 2.6 kg/piece

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 320-390mm -Number: 24x Fixators available -Price: piece -Dimensions: Ø 360/H370 mm -Weight: 41kg/pcs Gtjdskahkgspfx Ah Esw

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements Gtodpfxefzlvmj Ah Esw -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece